Does anyone get a black screen after dismissing the balance on a paygo phone

I get a blank, black, screen after dismissing the balance on my paygo 3GS iphone. To get rid of it I put the phone into standby and then wake it up!

From your logfile
[787100.353] (EE) Failed to load /usr/lib/xorg/modules/drivers/i740_drv.so: /usr/lib/xorg/modules/drivers/i740_drv.so: undefined symbol: I740_Sync
Corruption seems the correct assumption here; I'd boot using a rescue disc; then mount your actual system and reinstall all packages. After chrooting, that should be something like pacman -Sf `pacman -Qqet`

Similar Messages

I get a black screen after installing the bootcamp drivers on my newly created windows partition?

I am attempting to install windows 7 on my mid 2007 core 2 extreme iMac. I open bootcamp and do all of the steps except the usb flash drive drivers from apple because the server always fails to load. After restarting, I install windows 7 to the bootcamp partition, and the screen goes black during the "Completing Installation." I wait about an hour before shutting down and rebooting into my Mac partition. I use paragon ntfs for mac and go to the drivers folder and delete the atikmdag.sys file and restart. Booting into the windows partition, I get the error that says "Windows installation has failed because the system unexpectedly restarted. Click ok to restart and redo installation" or something along those lines. Instead of pressing ok, I press shift+f10 and open regedit. After opening regedit, I go into some registry file for the setup (I don't remember where this is located, although I can find it if needed), and I change a value from 3 to 1. After doing this and restarting, It boots regularly with a super low res screen but it boots without problem. I go to the apple website and download the appropriate bootcamp support software and install on my windows partition. After restarting, the screen is black again. I assume this is another video driver problem again because the black screen seems to always be video driver problems; however, its odd that the bootcamp support software would give me an incorrect video driver as it is directly from apple. Would this be the problem or does anyone know a fix? Any help is appreciated.
Cheers,
Adam

If you bought your RAM at a place that also sells PC RAM you may have gotten mislabelled RAM. PCs can handle different RAM speeds so they’ll often label higher speed RAM as a lower speed rather than make two different speeds of RAM. But Macs are much more picky. They require a RAM stick to be exactly 667mhz not 675mhz or 800mhz. The way to tell is to put one of your old RAM sticks in and it will force the new RAM to run at the correct speed.
This is from one review of PNY RAM:
"These modules are actually 800Mhz. PNY no longer makes or sells 667Mhz modules. Not all computers that require 667Mhz are compatible with 2 800Mhz modules. They refuse to down clock properly. This is especially true with a number of Core 2 Duo MacBooks. Spoke to PNY support, they flat out told me that yes, they sell 800Mhz modules in 667Mhz packaging. If you RMA a module that is 667Mhz (or supposed to be 667Mhz) they will replace it with an 800Mhz module as they no longer have any 667Mhz SODIMMs, not even for RMA replacement!"
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.

Why I'm still getting a white screen after Replacing the screen on my iPhone

i just replaced the screen on my iPhone 4 but after I finished , im getting a white screen all the time

Did you replace the screen yourself? If so, then opening the device voids any post-warranty support from Apple, and from the forum. You will need to Google for help, since according to Apple, the iPhone does not have any user serviceable parts.

Black Screen after flashing the latest BIOS

Nothing but Black screen (fan, leds work) after flashing the latest bios...
Is there anything I can do, or just new bios/motherboard can help? (I tried resting the battery, F8 key..) Thanks in advance

I presume BIOS is screwed up. What you need is professional help with this so contact nearest service provider and ask for help.
By the way: check this forum using advanced search option. In the past I saw several interesting threads about BIOS recovering. Im pretty sceptic about it but maybe you will be lucky and find solution.

[SOLVED] Black screen after GRUB

Hello everyone
I was setting up a machine with E17 and was trying various DM's since none seemed to work. After attempting to use LightDM, I get a black screen after GRUB. I was trying to read the various logs at /var/log/ but I cannot understand them properly. I tried reinstalling entrance and LightDM with no luck. I even tried editing grub's entry appending '1' or 's' and still no dice. Any help would be appreciated.
Last edited by Linoman (2014-01-20 09:22:33)

Hi tnx for both answers.
I missed something important in Xorg.log. As you can see, fbdev and modesetting aren't loading as usual. I didn't check grub stuff, I don't think it's related, since loading in level 3 (text mode) I get a black screen but I can login as root and turn off the computer blindlessly.
[ 2.969] (II) LoadModule: "modesetting"
[ 2.969] (WW) Warning, couldn't open module modesetting
[ 2.969] (II) UnloadModule: "modesetting"
[ 2.969] (II) Unloading modesetting
[ 2.970] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2.970] (II) LoadModule: "fbdev"
[ 2.970] (WW) Warning, couldn't open module fbdev
[ 2.970] (II) UnloadModule: "fbdev"
[ 2.970] (II) Unloading fbdev
[ 2.970] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2.970] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 2.970] (II) VESA: driver for VESA chipsets: vesa
[ 2.970] (++) using VT number 7
[ 2.974] (WW) Falling back to old probe method for vesa
javex wrote:Post the content of the following files:
Also does disabling LightDM again help resolve the issue, i.e. can you get it to work without LightDM?
No, I can't get it to work changing DM's. I'm not sure if I pacman -Syu before changing DM's another time. Maybe it wasn't LightDM's fault afterall.
Spider.007 wrote:Additionally; try booting without the 'quiet' entry that is in the kernel line by default; and disable https://wiki.archlinux.org/index.php/Ke … de_Setting too
Thanks for pointing out that. I didn't knew I had it on.
Last edited by Linoman (2014-01-11 21:34:08)

Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

Hi there,
Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
To date I have tried the following:
Loading up the latest Nvidia drivers from the Nvidia website
Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
I know many others are having this problem so I really would like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
If anyone else is having similar issues please respond as this will hopefully lead to more action.
cheers
Steve

I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers. I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem. I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website. It didn't work either. It actually failed to install altogether, saying my system is incompatible.
As is, the pc works fine. But videos and games that require motion is noticably choppy.
Any help from HP??

Qosmio X870-149 - Black screen after Update to win 8.1

After an update to win 8.1 I got a black screen after login , the only thing I could do was to press zero during startup and make a recovery installation .
It took 40 houres , I do not know why it took so long , but when it was over, the HDD was completely empty , so I installed win 7 instead , since I had not made ??a recovery CD . The problem now is that I still get black screen in between , and thinking that it might be a heat problem , I still have warranty , but I do not know if it applies when I installed win 7 on the machine.
I still have a warranty on my toshiba Qosmio

Hi
Well, the warranty covers the hardware related problems. It does not cover any issues related to the software.
Now the open question is: why the black screen appears?
Is it hardware or software issue?
What happens if you access the BIOS?
Can you see anything on the screen?
Is something visible on the external monitor?

Why do I get a black screen in front row when watching some iTunes store purchases? esp Cars 2

We bought Cars 2 a few months ago from the iTunes store. The movie won't work in Front Row, we only get a black screen (except for the blue Front Row controls at the bottom) although the audio comes through just fine. The annoying part is all of our other iTunes store movies work fine in Front Row. Just Cars 2 is broken. I don't think that it is an authorisation problem because it plays okay in iTunes, Quicktime, even via airplay to an appleTV or via Home Sharing to our iPad.
The movie is only standard definition so I am guessing that it is not an HDCP issue; I understand that there is only HDCP on HD movies. We are playing it on a Mac Mini (core 2 duo) on a Sony Bravia via a VGA connector.
After a little bit of complaining, apple let us download the movie again in case the file was corrupted, but unfortunately the same problem with the new version.
The computer did have Perian installed at one point, but uninstalling and restarting made no difference.
I have found lots of reports of movies with missing picture in Front Row but these are all ripped videos, never with an iTunes Store purchase.
Apple won't refund our money as the purchase was more than 60 days ago by the time I gave up troubleshooting and reported the problem.

Yeah! Problem solved: It's a QT issue.
Cause: Mac Update Software downloaded a faulty QT.
Solution: Download QT from Apple's QT site.
Great to have the Video back

Black screen after login while on battery with graphics switching enabled

Getting a black screen after entering my password while logging into my account while on battery with graphics switching enabled. Everything is up and running, I just can't see it.
I can log into the guest account on battery
I can log into my account while plugged into power
I can log into my account on battery if graphics switching is disabled
I believe something that is starting up in my account is causing the system to switch from integrated to discrete graphics on login, and that switch isn't working correctly on battery power.
As a work around for now, I can run with graphics switching disabled, but I'd like to solve this so I get longer battery life.
MacBook Pro Retina 15"
Mountain Lion
All updates applied

I had the same issue and managed to reslove it.
Shut down your machine.
Power it back on while holding the 'shift' key (left or right, doesn't matter)
You will see a greay progress bar go across the screen while you boot in to 'safe boot'
Once booted, login, and go to Energy Saver and turn on 'Automatic Graphics Switching'.
Reboot back in to normal mode, and you should be able to log back in and see again.
I did this without being plugged into AC power.
Hope it helps!
Cheers!

Black screen after BIOS update

Hi there,
After updating BIOS with regular HP software (i forgot the name now), the computer shut down and from that moment when i turn it on the screen stays black (with computer apparently running). I read so many posts with similar problems and i tried few things but without success. I know that i am very close to solve the problem but from all the suggestions i am now simply confused. I would like to ask, if someone can guide me through step-by-step procedure, i figured out that i need to install a BIOS version on USB-stick, but exact details i am obviously missing.
I have HP Pavilion dv 6700 Entertainment PC and new HDD inside without HP_TOOLS on it.
Thank you veeeeeryyyy much!

Hello @milence,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer is experiencing a black screen after updating the BIOS, and I would be happy to assist you in this matter!
To return the BIOS back to factory default settings, I recommend following the steps in this document on Restoring the BIOS. If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My Imac 24" goes black screen after start up. Booting from original CD or CMD R don't work, both go black screen

So, yesterday while playing a game of league of legends my Mac stopped running. After I resetted it, I got black screen after it the chime + loading bal.
So far I've tried:
CMD+R => black screen
Holding shift => black screen
Holding Alt => chosing the HR, the repair disk, or the original CD to reintsall => black screen
Holding S => got to the terminal, did the check up, it said it was ok, restarted => black screen
Took off the power cable, waiting at least 15 seconds, and everything back on => black screen
Holding Alt Cmd + p + R => black screen after restart
Removed 1 of the memories, then testen, same with the other one => black screen
I'm pretty much out of ideas at this point. Anything I've overlooked?

Any white text?
Startup - Black Screen/White Text
Startup – Red Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)
Restart the computer holding down the command - option/alt - P - R keys before the grey screen appears. Continue to hold until you hear the startup chime for the second time.
Reset NVRAM/PRAM
Try a SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC

Satellite M70 - Black screen after recovery installation

So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
I do not know what to do now to make my laptop work again. Please help.

Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
Which installations mode you have used: standard mode or expert mode?
Try to install it again.
As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

When i'm in email, after about 10 seconds, i get a black screen.....10 seconds later, it returns me to the general screen....anyone have this before??? thx

when i'm in email, after about 10 seconds, i get a black screen.....10 seconds later, it returns me to the general screen....anyone have this before??? thx

I don't know if you've got this solved or not but I started getting this too about a month ago. I just had it happen again about 10 minutes ago. I was on a website & BAM black screen, I don't hear the usual "winding down" of the hard drive though, so the HD sounds as though it's still working properly AND there's a weird hue around the edges of the screen so it's not pitch black as though the monitor turned off. Once I force shut down then I get the true pitch black screen before it turns back on again.
Also, every time this happens & I re-start the hard drive tends to be working very hard doing something in the background for at least 2-5 minutes not sure why?

Films downloaded won't play.I just get a black screen. My computer crashed last week and I had to do a 'total recovery' - an important link is missing... anyone any idea what it could be? I have updated iTunes and Quick Player

Films that I have downloaded from iTunes won't play. I just get a black screen. My computer crashed last week and I had to do a Total Recovery - Films played perfectly before this. I must have deleted a program or link.............. anyone know what could be missing? I can play YouTube videos etc. but nothing in the iTunes store - films or trailers won't work.

The movie is from iTunes. You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case.

I have an iphone 4s why does it have a black screen instead of my background picture when I get a text message?

I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?

When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

Does anyone get a black screen after dismissing the balance on a paygo phone

Similar Messages

Maybe you are looking for