Does anyone get this to work on WinXP?
I found a bunch of threads on this topic, but none of the recommended fixes have worked for me.
Here's my setup:
The Mac is a Dual 867 G4 (MDD), running OS 10.4.5. Uses Airport to connect wirelessly to a Linksys 4-port WAP.
The printer is an HP Laserjet 1300 connected to the Mac via USB. Printer sharing is enabled on the Mac, and the model is selected.
The PC is running Windows XP Pro SP 2. All recommended updates applied. Connects via a Linksys USB Wireless to the same WAP. Had previously configured network printing from the XP machine to the Mac, but it was always an arduous task.
I downloaded and installed Bonjour before removing the old queue. Ran the Bonjour Printer Wizard, which saw the printer. I selected the drivers already present, set it to the default printer, and got the "Error: You do not have sufficient access to your computer to connect to the selected printer" message.
Found the KB article that told me to dump the old printer queue, and I deleted both the older icons for this HP printer. Still got the message. Remembering the wisdom of Dogbert, I shut-up and re-booted. Still get the message.
Made sure I was running as administrator, and I am. Found a thread where someone suggested checking Administrative Tools > Local Security Policy > Local Policies > User Rights Assignment to see that "Load and unload device drivers" was present and available to Administrators. It is. Still get the error.
Found another KB article that mentioned SP2 is a problem because it turns on Windows Firewall by default. So I went into that control panel, and added Bonjour as an Exception app, then created a new port TCP 5353 to open that up in the firewall.
I still get the error.
What else can I look at? What am I missing?
And is "Bonjour" a re-christened "Rendezvous?"
Thanks for any help...
Hi Buzz_kill:
I have Bonjour configured on my Windows XP SP2 machine and I'm able to connect and print to a shared printer on my Mac.
In one of the KB articles, it suggests the following: For Service Pack 2 systems
If you've installed Service Pack 2 on your system, you can use Bonjour for Windows to reconfigure the firewall automatically afterwards—you should not manually reconfigure this setting. To do this:
1. Go to the Control Panel and click Add or Remove Programs.
2. Select Bonjour from the list, then click Change/Remove.
3. Choose Repair, then follow the onscreen instructions.
If repairing doesn't resolve the issue, try uninstalling and reinstalling Bonjour.
1. Go to the Control Panel and click on Add or Remove Programs.
2. Select Bonjour from the list, then click Change/Remove.
3. Choose Remove, then follow the onscreen instructions.
4. Reinstall Bonjour for Windows by downloading the program from the Apple website, or install it from the media on which it came.
The other suggestion that I have is:
If you are using a router, you really don't need a firewall on any machine. To see if it's the firewall on your XP macnine that is causing the issue, turn off the Windows XP firewall. Sounds simple doesn't it, but to actually turn off the windows firewall, select it from your control panel, select Advanced, and uncheck all of the connects and click ok.
Give that a shot and let us know how/if it works.
Oh, Bonjour is the same client as before, it was just renamed due to naming issues.
Similar Messages
-
DataTipFunction anyone get this to work??
I am trying to pass in some info using dataTipFunction when I
create a chart but the object being passed to Javascript is empty.
Anyone get this to work??
Eric Haskinsplease define your problem exactly. du you get a compile error? a runtime error?
please use the code tags, and rename your static member Array to thomething else as a classname.
kind regards -
Outlook 2007 - Can anyone get this to work?
Just wondering if anyone had success with this, it's really frustrating that the Oracle connector doesn't work with Outlook 2007.
I've tried to get this to work on several machine configurations (Office 2007 with and with out Office 2003) using the latest Connector for Outlook on Windows XP and Windows Vista and was still unable to get it to work. I'm 100% convinced that Oracle needs to work on this ASAP and I'm even more astonished and perplexed that Oracle have not provided a solution for their customers. This has pushed me to the point where MSExchange, even Novell are being consider as a permanent alternative. Let's face it, Exchange does seem that they finally got their act together and offers a lot of flexibility for Mobility.
I've spent about 80+ hours on this and have permanently given up until I hear back from the Oracle developers, who doesn't seem to have a solution readily available to give provide. I'm interested in anyone's comments about their conversations with Oracle. -
HT1203 It jus doesn't work...! Did anyone get this to work?
I'm struggeling getting this to work: I want to share our music on 4 accounts on 1 iMac (Lion).
Moved iTuned Media to /Users/Shared, changed the Preferences to reflect this, but the songs don't appear in iTunes.
Anyone? Please?I had the same problem. Even though it reads like a 2nd alternative, it is actually a continuation of the first step.
To listen to another account's music files
Open iTunes.
From the iTunes menu, choose Preferences.
Click Advanced.
Deselect the option to "Copy files to iTunes Media folder when adding to library file."
Click OK.
From the File menu, choose Add to Library.Note: Windows users can also choose Add Folder to Library to add a folder of songs.
In the window that opens, navigate to the location where the other user's music is saved (the iTunes Media folder in this example).
Click Open.
Repeat these steps for each account that is listening to shared music.
When another user on the computer imports new music from CD, repeat steps 6 through 8 to add the music to your library."
After you do this to each account, everything should work fine. -
ISE is Version: 1.1.4.218
when I try to set time and date setting in comon condition, I choose the date ragne,
I get this error
Unable to create Condition - f Error: Unparseable date: "2013. 06. 18."
does anyone know why it is saying this ??
I tried Version 1.1.3 too. it does not work either !
can anyone please help me with this.
Thank you.This is a known internal defect and should be fixed in ISE 1.2
Since you can't see the defect, I'm providing the bug description for your reference.
1. Go to Policy > Conditions > Common > Time and Date
2. Click on "Specific Date Range"
3. The current date appears in FromDate and ToDate
4. Save this default setting
A error message appears: "Unable to create Condition - Error: Unparseable date: "01/16/2013"
1. It's unclear why this is unparsable. (Logically seems OK. Specific date range is for one day - today.)
2. If there is something wrong with it, then why is it the default setting? (If the start date has to be beyond current date then the default should be changed)
3. Specific date gives a similar error even if the date is one day beyond the default of today
Jatin Katyal
- Do rate helpful posts - -
[solved] graphlab / graphlabapi, anyone get this to work?
edit3: I'm marking this as solved, as it basically seems to work for me for now. I decided not to upload the packages to the AUR because graphlab is broken with the current version of openmpi and depends on a libjson library that I'm not at all familiar with and nobody else here seems to use. If these aren't good reasons not to submit the packages I'll happily submit and maintain them. I'll maintain the PKGBUILDs on github for now https://github.com/sveitser/pkgbuilds .
I'm trying to use graphlabapi ( www.graphlab.org ) on arch linux. I'm planning on using this quite a bit in the future so my goal is to create an AUR package eventually. I managed to build it successfully but the compiled application does not seem to work properly. I posted an issue on their google code page ( http://code.google.com/p/graphlabapi/is … tail?id=41 ), but was wondering if anyone here managed to get it to work.
If anyone wants to give it a shot, AFAIK the following will install the necessary pacman dependencies:
pacman -S --needed apache-ant jdk7-openjdk mercurial cmake openmpi
edit: I also put a symlink named "python" to "python2" in my PATH before "/usr/bin" because otherwise the build system would detect python3 and the build failed at some point. Probably not a proper workaround but I think it seems to do the job for now.
edit2: Found a way to tell cmake to choose python2. See below.
Build instructions are basically:
hg clone https://code.google.com/p/graphlabapi/
cd graphlabapi
./configure -D PYTHON_EXECUTABLE=/usr/bin/python2
cd release # or "cd debug" for quicker build using less RAM
make -j 4
The release build needs a lot of memory so they suggest not to use more concurrent make threads than the system memory in GB. I also run into the same issue if I build the debug build. The build takes a long time due to all the dependencies that will be installed locally. At the moment they don't seem to check for an existing boost installation on the "default" branch so boost will be installed locally even if it is available system wide.
The tcmalloc dependency fails to build with glibc 2.16 so I patch the file
deps/tcmalloc/src/libtcmalloc/src/base/linuxthreads.cc
with respect to the graphlabapi base directory with
196c196
< static void SignalHandler(int signum, siginfo_t *si, void *data) {
> static void SignalHandler(int signum, siginfo *si, void *data) {
as suggested here http://code.google.com/p/gperftools/iss … akechanges and then run make again
make -j 4
Upon which the build succeeds. However when I try to run the examples or tests I mostly get no output and the programs just hang.
I've been struggling quite a bit and any help or pointers would be greatly appreciated. Thanks!
Last edited by sveitser (2012-07-24 06:39:18)edit: Unsetting CXXFLAGS before executing "make" seems to let the build complete. Not sure if that's a good idea but I 'think' cmake sets it appropriately anyway.
After successfully compiling the package I created a PKGBUILD that I thought should work but it aborts on error during the "make" step. When I run "make" from a terminal in the corresponding directory the compilation succeeds.
The PKGBUILD (also here https://github.com/sveitser/pkgbuilds/t … raphlab-hg ) is
# Maintainer: Mathis Antony <[email protected]>
pkgname=graphlab-hg
pkgver=4197
pkgrel=1
pkgdesc="GraphLab is a new parallel framework for machine learning."
arch=('i686' 'x86_64')
url="http://www.graphlab.org"
license=('apache')
depends=('openmpi' 'python2' 'jdk7-openjdk' 'boost')
makedepends=('cmake' 'mercurial' 'apache-ant')
options=()
source=(tcmalloc.patch)
md5sums=('11bc88f68b4dcf214255a3b7de1f8ede')
_hgroot=https://code.google.com/p
_hgrepo=graphlabapi
build() {
cd "$srcdir"
msg "Connecting to Mercurial server...."
if [[ -d "$_hgrepo" ]]; then
cd "$_hgrepo"
hg pull -u
msg "The local files are updated."
else
hg clone "$_hgroot" "$_hgrepo"
fi
msg "Mercurial checkout done or server timeout"
msg "Starting build..."
rm -rf "$srcdir/$_hgrepo-build"
cp -r "$srcdir/$_hgrepo" "$srcdir/$_hgrepo-build"
cd "$srcdir/$_hgrepo-build"
./configure -D PYTHON_EXECUTABLE=/usr/bin/python2 \
--prefix=/usr
cp "$startdir/tcmalloc.patch" patches/
sed '/ExternalProject_Add(libtcmalloc/a \
PATCH_COMMAND patch -N -p0 -i ${GraphLab_SOURCE_DIR}/patches/tcmalloc.patch || true' \
CMakeLists.txt > CMakeLists2.txt
mv CMakeLists2.txt CMakeLists.txt
cd release
unset CXXFLAGS
make
package() {
cd "$srcdir/$_hgrepo-build"
make DESTDIR="$pkgdir/" install
and the tcmalloc.patch file
--- src/base/linuxthreads.cc 2012-07-23 02:21:30.946086243 +0800
+++ src/base/linuxthreads.cc 2012-02-03 05:36:23.000000000 +0800
@@ -193,7 +193,7 @@
/* Signal handler to help us recover from dying while we are attached to
* other threads.
-static void SignalHandler(int signum, siginfo_t *si, void *data) {
+static void SignalHandler(int signum, siginfo *si, void *data) {
if (sig_pids != NULL) {
if (signum == SIGABRT) {
while (sig_num_threads-- > 0) {
The error I get when running makepkg is
[ 27%] Performing patch step for 'libjson'
patching file JSONOptions.h
patching file makefile
patching file Source/JSONDefs.h
[ 27%] No update step for 'libjson'
[ 28%] No configure step for 'libjson'
[ 28%] Performing build step for 'libjson'
makefile:173: *** recipe commences before first target. Stop.
make[2]: *** [../deps/json/src/libjson-stamp/libjson-build] Error 2
make[1]: *** [CMakeFiles/libjson.dir/all] Error 2
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
I think the problematic makefile is src/graphlabapi-build/deps/json/src/libjson/makefile. Line 173 is:
170 # Usage check
171 ifdef CXXFLAGS
172 ifdef BUILD_TYPE
173 $(error CXXFLAGS and BUILD_TYPE are mutually exclusive)
174 endif
175 endif
but I'm thinking that if this were indeed to cause the error I should see the corresponding error message.
Last edited by sveitser (2012-07-23 09:38:15) -
"List updated" screen on my iPhone and asking me to Accept or Cancel. Does anyone get this?
Has anyone ever got this screen on their iphone before? I get it occasionally but have no idea what's causing it.
Hmm interesting theory...I do press undo a lot, but only because I'm trying to get a good-looking brushstroke down, usually I don't even actively lock a layer as a step during my session because they've already been locked previously and I don't need to lock/unlock them often. The thing that is frustrating is that I will try to make a stroke, and can't because the symbol pops up...then I'll make the exact same intended stroke again and then it will work fine. It's pretty haphazard but basically every other stroke or every few strokes, it'll pop up.
I think I'm beginning to almost accept this rhythm in my workflow
I'm using CS6, and I noticed that I don't have this problem when I bring the file to work on at my job (CS5) or at school (CC).
Edit: I tried to test your theory by drawing as much as I could without pressing undo...I was pleasantly surprised to not run into any issues with the paintbrush, but sure enough, as soon as I switched from the paint brush to the eraser, and tried to erase something I just drew, the eraser popped up with the "prohibited" symbol. -
Effect Pathfinder (Anyone get this to work??)
I am trying to create BAGEL THIN in the style of DELI THIN in one editable appearance stack.
Cyan is a dummy color to help troubleshoot this. Cyan is the shape I am trying to subtract out of the black dropshadow. None of the pathfinder commands work. The 2nd example is the result of using Minus Back. Exclude, subtract don't work either and I tried moving these within the stack.How about two objects, both with live text?
Object 1: White type with second fill below Characters. Second fill is black and has Effect > Distort & Transform > Transform with a horizontal offset of 4 pt. and vertical offset of 4 pt. Entire object has a warp effect.
Object 2: Copy of object 1. Changed offset of shadow to 2 pt. for both horizontal and vertical. Added white fill at bottom with Effect > Convert to Shape > Rectangle, relative size with extra width and height of 6 points.
Object 2 used as opacity mask on object 1.
http://dl.dropbox.com/u/5005292/Deli_Thins.ai -
I can get the following code to compile, but it won't execute. Will somebody tell me why?
import java.io.*;
class Array
public static String[][] Array = { {"Paris", "418", "Rome", "55"},
{"Liverpool", "121", "Copenhagen", "35"},
{"Liverpool", "418", "Paris", "50"},
{"Liverpool", "553", "Frankfurt", "55"},
{"Frankfurt", "553", "Budapest", "50"},
{"Amsterdam", "121", "Madrid", "65"},
{"Amsterdam", "418", "Paris", "35"},
{"Madrid", "121", "Stockholm", "90"},
{"Budapest", "553", "Warsaw", "30"},
{"Copenhagen", "121", "Amsterdam", "35"},
{"Rome", "418", "Amsterdam", "60"},
// Start Method
System.out.println("Welcome to NoWings Airline.");
public void item1() {System.out.println("Start");}
public void item2() {System.out.println("Fly");}
public void item3() {System.out.println("Info");}
public void item4() {System.out.println("Exit");}
public void doMenu() throws IOException {
BufferedReader input = new BufferedReader(new InputStreamReader(System.in));
boolean done = false;
char answer;
do {
System.out.println();
System.out.println("What do you want to do?");
System.out.println(" 1 \t Start");
System.out.println(" 2 \t Fly");
System.out.println(" 3 \t Info");
System.out.println(" 4 \t Exit");
answer = (input.readLine()).charAt(0);
switch (answer) {
case '1' : item1(); done = true; break;
case '2' : item2(); done = true; break;
case '3' : item3(); done = true; break;
case '4' : item4(); done = true; break;
case 'x' : done = true; break;
default : System.out.println(
"Invalid option -- please try again");
while (!done);
}please define your problem exactly. du you get a compile error? a runtime error?
please use the code tags, and rename your static member Array to thomething else as a classname.
kind regards -
Does anyone get this? I can't open facetime at all
10.8.2 mac mini - have face time, but when launched, I can't access the preferences. Face time screen has a camara with a line through it? Help!
To my knowledge, and the Apple specs indicate that the mac mini does not include a built in Facetime camera, although an external camera can be plugged into it for FT use.
-
Does anyone have URL replacement working for catalog generated from wiki pages library
Hi everyone,
I have created a catalog from a wiki library which surfaces news/event/announcement articles to a publishing site (with make URLs relative to this site selected). This works well after modifying the item page and specifying the content as HTML regarding
the functioning of category/item pages.
The only issue which remains is that hyperlinks between wiki pages are not replaced in the target site (they always point to the wiki pages within the authoring site collection rather than to their catalog counterparts in the publishing site). It is
my understanding that with publishing pages from a pages library these links are replaced to point to other items in the catalog connected site rather than the source.
Is this just by design (only working for publishing pages rather than wiki pages), or does anyone have this replacement working?
If this does not work it kind of defeats the purpose of the catalog here and I might as well give everyone access to the authoring library and just use a CSWP in the publishing site to redirect to the authoring wikis. Not terribly nice from a layout,
navigational or conceptual standpoint though.Just to add a bit more info to this... looking at the coreclient.log file you can plainly see that the page view took 50367ms to complete.... if anyone has any ideas, it would be greatly appreciated.
Started GET "/wiki/pages/V6C291y8z/price_lists.html" for 192.168.0.100 at Fri Nov 04 13:48:49 -0500 2011
Processing by PagesController#show as HTML
Parameters: {"title"=>"Production_Intercom.html", "id"=>"V6C291y8z"}
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner.html.erb (1.8ms)
get_timezone_offset_from_request: -18000
time: Wed Oct 26 12:52:17 -0500 2011
time (client timezone): Wed Oct 26 12:52:17 -0500 2011
Rendered cc/_entity_header.html.erb (2.5ms)
Rendered cc/_wikieditor.html.erb (0.1ms)
Rendered sidebars/_tags.html.erb (59.0ms)
Rendered cc/_related_item.html.erb (0.0ms)
Rendered sidebars/_related.html.erb (0.3ms)
Rendered cc/_comment.html.erb (0.0ms)
Rendered sidebars/_comments.html.erb (0.4ms)
Rendered sidebars/_updates.html.erb (0.1ms)
Rendered sidebars/_settings.html.erb (0.2ms)
Rendered cc/_sidebar_section.html.erb (61.2ms)
Rendered cc/_sidebar.html.erb (61.5ms)
Rendered pages/show.html.erb within layouts/application (50366.0ms)
Completed 200 OK in 261847ms (Views: 50367.1ms) -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
I am synching my ipad and iphone with icloud. Events put in calendar on ipad go to the iphone calendar,, but if i enter an event on the iphone calendar, it does not go to the ipad. What do i do to get this to work both ways?
OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123381) -
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com
Maybe you are looking for
-
Not able to USE Withholding tax in multi plant PO
We have a multi-plant PO for same vendor. When we are doing MIRO for plants other than Corp Serv.. We are not able to use Withholding tax. F4 does not gives any option in witholding tab in miro. where could be the problem
-
Retina Display - New MacBook Air Release Date
Anyone know when the new MacBook Air will be available within the UK? I'm looking at purchasing one and don't want to buy, only to find out the new version comes out a few days later...
-
Report for counting transactions (entries) on accounts
Does anyone know of a specific report that will give you the number of transactions or entries posted against a GL account (or types of acounts such as revenues) during a period of time.
-
Hey guys i have a web app that basically has a browse button and when the user clicks the button it prompts for a file on their PC and loads a datagrid. My question is rather simple. How do I validate the date columns on datagrid so that it should
-
i cant export my imovie to youtube because I dont have google chrome or firefox-- however i once downloaded google chrome to my windows lap top and it went spaz... unsure if this will happen to the mac?/ any help