Does anyone has experience with "in Apps"

We developed an iPad App which would go on the market for 6,95 euro. However we would like to use the "in app" to get more downloads. Anybody has experience in this? Is there perhaps an other way to give a large number of apps for free (based on an specific ID)

MrTerryG,
I wish I could tell you of a happy and joyful experience. However, I'm afraid my story won't put your mind at ease.
Since I bought my iPhone last summer, my vibration-function was very loud. I wasn't aware that this was abnormal until I heard a colleague's iPhone vibrating much softer, more than half a year later.
I first tried to bring in my iPhone in a local Apple Store, but they told me I had to bring it in at Mobistar, since I bought it there.
When I took it back, I saw a very thin hairline fracture at the simcard tray. This happened when I had -carefully- removed the simcard to bring in the iPhone.
I brought in my phone at Mobistar, describing the hairline fracture and vibration problem. They sent it to Dynafix.
2 weeks later, I went to the Mobistar Center, and they told me I had 3 choices:
1. Pay 282€ and get a new iPhone in return
2. Pay 40€ to get it back unrepaired
3. Tell them to throw away the phone
They said that the damage wasn't covered by the warranty. After that, they showed me a picture, taken by Dynafix. I couldn't believe my eyes, the hairline fracture wasn't just a hairline fracture anymore, and suddenly there were much more fractures! I don't know what they did with my phone, but it looks awful now.
I sent emails to Dynafix, but their replies were not covering the point (as if they only read half of the mail).
I called and mailed Apple and Mobistar too, and both ends advised me to send letters, because there were much more similar complaints.
So that's what I'm going to do tomorrow.
It's really really sad, because this rules out buying new iPhones from Mobistar, because as long as they have a contract with Dynafix, you have an almost certain chance of being scr*wed by the repair company.
I hope you haven't sent in your iPhone, because my advice is: take detailed pics of your phone first, and have them signed by the salesman in your local store where you are bringing it in.
Kind regards,
codus

Similar Messages

  • Does anyone has experience with Dynafix repair?

    Hello,
    my iPhone broke down, and in Belgium all warranty claims have to go via Mobistar/ Dynafix.
    I looked this company up on the internet, and all I got were horror stories about warranty refusal (due to water damage, other impossible to proof defects), iPhones that come back more broken than before, claims to pay 40 euros just to get an unfixed iPhone back,...
    To be honest I'm afraid to even send my broken iPhone to them. Apparently Apple doesn't support iPhones in Belgium because I tried an official Service Provider, but they couldn't help me. Have to go to Mobistar -> Dynafix.
    So does anyone have positive experiences with repairs in Belgium?
    (I do want this iPhone fixed otherwise I'll lose all my progress in imob online
    The new iPhone 3Gs looks great, and if the old one gets repaired, I won't hesitate to buy the new one too.
    Thanks in advance for any reactions. I'll keep you informed on the progress.

    MrTerryG,
    I wish I could tell you of a happy and joyful experience. However, I'm afraid my story won't put your mind at ease.
    Since I bought my iPhone last summer, my vibration-function was very loud. I wasn't aware that this was abnormal until I heard a colleague's iPhone vibrating much softer, more than half a year later.
    I first tried to bring in my iPhone in a local Apple Store, but they told me I had to bring it in at Mobistar, since I bought it there.
    When I took it back, I saw a very thin hairline fracture at the simcard tray. This happened when I had -carefully- removed the simcard to bring in the iPhone.
    I brought in my phone at Mobistar, describing the hairline fracture and vibration problem. They sent it to Dynafix.
    2 weeks later, I went to the Mobistar Center, and they told me I had 3 choices:
    1. Pay 282€ and get a new iPhone in return
    2. Pay 40€ to get it back unrepaired
    3. Tell them to throw away the phone
    They said that the damage wasn't covered by the warranty. After that, they showed me a picture, taken by Dynafix. I couldn't believe my eyes, the hairline fracture wasn't just a hairline fracture anymore, and suddenly there were much more fractures! I don't know what they did with my phone, but it looks awful now.
    I sent emails to Dynafix, but their replies were not covering the point (as if they only read half of the mail).
    I called and mailed Apple and Mobistar too, and both ends advised me to send letters, because there were much more similar complaints.
    So that's what I'm going to do tomorrow.
    It's really really sad, because this rules out buying new iPhones from Mobistar, because as long as they have a contract with Dynafix, you have an almost certain chance of being scr*wed by the repair company.
    I hope you haven't sent in your iPhone, because my advice is: take detailed pics of your phone first, and have them signed by the salesman in your local store where you are bringing it in.
    Kind regards,
    codus

  • Does anyone has experiences with dnscrypt?

    Hello,
    DNSCrypt is a little tool that install a proxy between your system and the DNS-Sever like google or your provider. As you know, the Traffic to the DNS-Severs isn't enryptet so anyone that have the potential can catch your IP-Adress. DNSCrypt install a proxy and encrypt all the Traffic between your machine and the DNS-Server.
    My Question, have any experiences with this Tool on the Mac?
    For more Information please visit here:
    http://lifehacker.com/how-to-boost-your-internet-security-with-dnscrypt-51038618 9
    http://dnscrypt.org/
    Thanks for Answers and greetings,
    @elias

    I followed the advice given here : http://www.pro-networks.org/forum/viewtopic.php?t=78185&postdays=0&postorder=asc&sta rt=10 and solved this booting issue. So now Vista works on my M40.
    The Vista Performance Index ranks my M40 with 3.4 (I think 5.9 is the maximum) which isn´t that bad. Even Aero works. The weakest component (which is the crucial factor for the Performance rank) is the CPU.
    All hardware components are working except the pcmcia drive. Most of the drivers where already installed after my first boot. I only had to tell Vista to search for audio-drivers online to get the sounddrivers too.
    Well, some special toshiba things aren't working because the drivers are missing. Those shortcut-keys for instance. I think I will also install XP in parallel because I'm missing some applications for Vista and I also wanna play some of my games from time to time.
    After all I can say Vista is working good on an M40-129. But so far I wasn't able to discover any real benefits compared to XP. But I like to play around and so I now have a new playground called Vista.

  • Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

    Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

    My 2010 Mac Pro does have built in bluetooth but I use the IOGear GBU421 instead.  That's because the built in bluetooth on the mac pro suck$ if you are more than about 3 feet from the machine.
    See the descussion: Poor Bluetooth reception and jerky mouse
    It works but you need to get used to its "quirks".  If you sleep your machine like I do the dongle is off because there is no USB power when sleeping for the dongle.  So you need some wired USB device to wake the machine.  In my case I use my wired keyboard.
    When waking up it doesn't always become paired immediately (maybe 30% of the time).  Then you need to flip the mouse switch to get it active.  Interesting enough I don't have that problem with the trackpad.
    Most of the time, in the rear occasions I reboot my machine, the mouse is ready to go.
    Once you get used to the "quirks" it's no big deal.  Hey, for about $9 what do you want?
    By the way I also always keep a wired mouse attached as a backup.

  • Does anyone have experience with Virgin or Boost Mobile?

    I have been with verizon for a long time...I have 4 lines with this service. I have since bought several phones off of craigslist or ebay just so I wouldn't have to be subjected to the tier plan. We use so much data it's crazy. I want the new Samsung Galaxy S4 so bad!!! Grrr! I've even thought about switching to Virgin Mobile or Boost Mobile. We pay so much for our phones now and I know of one guy who has boost mobile and loves it. Does anyone have experience with these providers?

    BC's CRM is part of the package, Salesforce is of course more dedicated. That pretty much sum's up these sorts of use cases.

  • Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

    I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1  I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders.  I've used Sony tape based camcorders in the past.  I'm looking for High Definition.  I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible.  I would like to download directly from the camera to FCE.  I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia?  And if not, but you really like another camcorder that you can recommend, what is it?

    The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
    The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
    One note, however, the Vixia HF M52 supports a number of different shooting modes.  I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE.   FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

  • Does anyone have experience with error 504 when trying to download a podcast?

    Does anyone have experience with error 504 when trying to download a podcast?  I've been a subscriber for two years without issue and in the last two days can't download this particular podcast (everything else is working fine - music, other podcasts, etc)

    The album was released on the 27th March this year, so the error occurred almost immediately after it was supposedly available.
    In the manage pre-orders section of my account, it says AVAILABLE but does not give me any choice over whether to download it, just to cancel it. Is this normal?
    iTunes customer services reset my password and tried to download the album themselves, but they also got the 5002 error, so it's been passed off to the engineers. How long does that usually take?
    If anyone has any other suggestions, it would be greatly appreciated.

  • Anyone has experience with sun idm data exporter /warehouse funtionality ?

    Anyone has experience with sun idm data exporter /warehouse functionality. There is not much documentation about how to debug it. I created everything like in the document. Everything seems running fine. I get the following the server tasks->Run Tasks
    Data Warehouse Exporter      Data Warehouse Exporter      Configurator      executing
    Prior to that i created database and 50 tables as it said in the doc.
    I created accounts and modify email address. Nothing is getting to my warehouse database and i don;t know where to look for the errors. Any information is appreciated.

    Hi there,
    I have been looking at the source code and I think I have found the problem.
    IDM determines whether to update or create a resource account
    by attempting to fetch the user from the resource.
    If the user exists then update, otherwise create.
    In the code, if the user does not exist, the code throws the
    exception: EntityDoesNotExist(1301)
    The code then catches this exception
    and then returns a null back to IDM,
    indicating that the user does not exist.
    Well, that is what the code says but this does
    not match its actual behaviour....
    I then decompiled the actual class (jar) files
    and the code there does NOT catch the exception,
    so it bubbles up to IDM, which regards it as an error.
    Soo, the jar file that is on the website has a bug in it.
    The source code in SVN is correct, but it appears
    that the jar file was not rebuilt.
    I am attempting to rebuild a new version of the jar file...
    John I

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

    Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

    Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
    http://www.adobe.com
    Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
    Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
    Cheers
    Don

  • Does anyone have experience with unzipping a password-encrypted ZipFile??

    Does anyone have experience with unzipping a password-encrypted ZipFile??
    My Zip Class works fine with every unencrypted file, but when I try to open an encrypted one, i get an error Message ("Encrypted ZIP entry not supported")
    Is ist impossible to unzip encrypted ZIPs???

    I've searched around a little bit and THIS IS THE SOLUTION!
    There is a (beta)version of winzip8 that uses a cli (command line interface)
    So, all you have to do is to implement a Runtime.getRuntime().exec(...) in your java program to call winzip8 and pass the zipfile path and the password.
    Here's the URL: http://www.winzip.com/wzcline.htm

  • Does anyone have experience with migrating applications from iAS6.0 SP2 to SP3? Did it go smoothly or are there problems to be expected?

     

    Hi,
    I haven't. But, there are lots of changes from each service packs,
    henceforth you may have to stick to what the documentation says to avoid
    the errors that shoots up. Again, the errors depends upon how you have
    coded your application. Please let me know if you have encountered any
    errors and the messages for me to help you.
    Regards
    Raj
    Peter Clijsters wrote:
    Does anyone have experience with migrating applications from iAS6.0
    SP2 to SP3? Did it go smoothly or are there problems to be expected?
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Does anyone has problem with the Glossary tab in RB8?

    The glossary tab does'nt show on *CHM file. Does anyone has that problem?
    1) Install RH8 on XP SP2 and register hhactivex.dll
    2) Start RH8
    3) Create new project.
    4) Click on '+' sign of Glossary from Project Manager to expand it and double click the Glossary(Default) to show the GLossary Pod.
    5) Type 'First' in the Term input field on the Glossary Pod, and click the + button to add it.
    6) Go to the 'Definition for :first section of the Pod and type in 'First'
    7) Save and generate the CHM file
    This is the first time I create a new project in RH8 with Glossary.
    If I import a previous project created with RoboHelp for Office X4 which has Glossary, and convert project to RH8 format and generate the CHM file, then the CHM file has the Glossary tab.
    I can't possibly beleive it is a bug in RH8 . However, what mistake did I make?
    This happens on XP SP2, RH 8.0.0.0.203, on XP SP3 with RH 8.0.2.208, on Win7 with RH 8.0.2.208. Basically, it doesn't matter on what PC we install RH8, doesn't matter how many time you register hhactivex.dll, the glossary tab never shows up. Howver, it shoes up on Winhelp.
    Thanks

    Hi there
    No, I don't believe they are ameteurs. Besides, some ameteurs do better work than "professionals".
    To be fair, some bugs are elusive. We may see them and report them but when the development team examines things they repeatedly and stubbornly fail to reveal themselves.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Does anyone have experience with Signatec High-Speed Digitizers​?

     I just purchased the PX14400 and I have a few questions for anyone that may have some experience with these.

    Hi ryder_2010,
    Hopefully someone on here has experience with that board and can help out. I wanted to also suggest posting on the Instrument Control board since users on there may have more experience with third-party devices and the related software (such as IVI drivers), assuming LabVIEW or CVI can be used to control this device. Best of luck!
    Daniel S.
    National Instruments

  • Mail app is crossed out in my Time Machine back up so I can't restore any of my emails.  Does anyone have experience with this?

    I was having problems with my trackpad on my MacBook and it was also running slowly, so in addition to replacing the track pad, I had them cleanout my system.  When I went to restore using my TimeMachine back up, my Mail and Address Book didn't restore.  When I tried to access the apps through the TimeMachine backup, they are crossed out.  All my work emails and contacts are gone!  Has anyone had any experience with this?  Any and all help would be appreciated.

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Maybe you are looking for

  • I have two apple accounts that I cannot get to merge as one.

    I have two apple accounts that I cannot get to merge.  One is a hotmail address and the other a gmail address as primary addresses in the two accounts. I would like to merge them into one account.  I cannot verify the addresses of either accounts bec

  • Printer connected to Airport Express only works on OSX Partition, not Windows 7 Partition

    I have a mid 2012 Macbook Pro, 13 inch with 2.9ghz processor and 8GB RAM that has a Boot Camp partition on it running Windows 7 Professional. I have had an Airport Express base station that I purchased in 2013, and have a printer connected to it, a H

  • Getting Username to pass into LOV select statement

    Hello! I'm wondering if its possible to get the username of the current user logged in and pass it as a variable into a select statement used in a dynamic LOV in Oracle AS Portal? What I'm attempting to do is pull all the values from a table that equ

  • Max Buffer

    Hi Please Guide me... How can i find which query , procedure or function using maximum resources in a DB? Thanx in Advance Mani

  • How to change subscription type

    Hi. I've mistakenly bought subscription to Ukraine to landlines, but wanted to buy a subscription to mobiles and landlines to Ukraine. I cannot wait until my active subscription ends next month and take my money back to buy new subscription. Solved!