Does anyone have a pitch control add-on?
My wife is dance teacher and is using an iPod to play all the music during her lessons. As in dance it is very usfull to dance and specially exercise at a specific beat, it would be perfect if she could change the beat of the songs while playing using a pitch control.
Does anyone know of an add-on to do that in the iPod? (I don't what to use an extra tool, e.g. Neumarkt mixer.)
Thanks for your help! Kuno
iPod
Thanks for your replay and your time.
But I'm not looking to change the beat outside the iPod. The goal is to have a song in its original beat on the iPod with the possibility to change the beat while the song is playing (like the volume). For a dance teacher that is very usefull if the students exercise new steps the first time: To start you could use a lower beat and after some repetitions you can switch back to the original beat.
(The work around we are using at the moment, is to change the beat on the computer in tool with pitch control and then load 2 or even more versions of a song to the iPod with different beats.)
Similar Messages
-
Does anyone have information on controling a gas delivery system?
We have a need to control a process gas both pressure and flow. We know that LabView can probably do this. We were wondering if there were any systems already put together?
Have a look at
http://www.bronkhorst.com/
They supply massflow controllers and pressure controllers that can be
controlled by a pc by means of the "Flowbus" (a fieldbus developed by them).
For the Flowbus in turn they can supply a ready to go Labview VI.
On the other hand
http://www.voegtlin.com/
supplies massflow & pressure controllers that are set via the MODBUS
protocol. A free MODBUS VI is available reom NI.
Please understand that this are just 2 suppliers in Europe that i know.
Guess there will be a lot more!
Regards
Ulrich Bangert
"John" schrieb im Newsbeitrag
news:[email protected]..
> We have a need to control a process gas both pressure and flow. We
> know that LabView can probably do
this. We were wondering if there
> were any systems already put together? -
Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
thanks everyoneBaconHouseVidz wrote:
… at the same time…
in hope to speed things up?
no, no effect. -
I run several firefox profiles at the same time. In the past I have used Tab Renamizer to label the main tab in each profile. I like this because then I can tell them a part from the drop-down list in win 7 when switching between profiles. The new version of firefox is not supported by this add-on. Does anyone know of any firefox add-ons that have a similar feature?
Using firefox 7.0.1core-el, i don't see the advantage of that or i can't figure out how i'm supposed to use it. for starters, i have to click the mouse in order to get "add bookmark here" to open, which is no different than clicking on the star in the location bar, or right-clicking on the page. there are also options in the bookmarks toolbar, but they all require clicking the mouse & holding down the right button, etc.
my goal is to use keystrokes only. typing on the keyboard, using both hands, using the space bar & my left pinky finger to tab over are all painless routines for me. as soon as i have to take my fingers off the keyboard & use the mouse, the pain begins.
as i said, in older versions of firefox, all i had to do to bookmark a page was click ctrl>d, then tab over & arrow down, when appropriate, to find the folder & add the bookmark. for me, as a touch-typist whose speed is between 60 & 80 wpm, this is lightning fast.
if i have this wrong, please correct me. i just see it as more mouse clicks that don't save me time or pain. -
I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?
It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room. -
I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
Thanks in advance for any suggestions.I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
Thanks in advance for any suggestions. -
NVIDIA control (Shadowplay mostly) with LabVIEW via ActiveX - Does anyone have documentation?
Hi Everyone,
I'm looking to capture my monitor video at around 30fps. ShadowPlay works well with my graphics card, and I've found that there is an ActiveX Library on the PC. The attached screenshot shows an example code for 5 seconds of capture.
Shadowplay only captures one monitor but I want it to capture both, or make two videos (one for each monitor) preferably. Although a possible work around would be recording one at a time but being able to programatically change between the two. The Shadowplay library is: ShadowPlayServerLib and the NVIDIA Library is: NVI2Lib (I presume this is NVIDIA but could be wrong)
I can't find any documentation on the activeX commands so I'm struggling to know what inputs and outputs of the property nodes should be. Does anyone have any? A search of the internet brings up my own forum post on NVIDIAs website:
https://forums.geforce.com/default/topic/805560/geforce-experience/shadowplay-activex-documentation-...
Any help on the NVIDIA/ShadowPlay side of things would be great, alternatively any ideas for capturing video at 30fps (I tried to use .NET to capture the screen shots to png files but it only managed 2.5fps without saving them)
Many thanks
Attachments:
NVI class.png 27 KB
shadowplayActiveX.png 32 KB
ShadowPlayCapture.vi 12 KBHi Woody247,
Here is brief overview to help using LabVIEW with ActiveX:
http://www.ni.com/white-paper/2983/en/
Here is an interesting example that could be useful to your application's functionality
https://decibel.ni.com/content/docs/DOC-41144
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland -
Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck. -
Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.
Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. -
Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.
APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/ -
I'm getting a lot of pop up ads. mostly while using Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
Thanks
RonYou may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!
Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck… -
tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?
Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason -
Hi there. I just bought a new iMac. Used to have a pc. Plugged my nano into iMac and it transferred my purchases fine. Bought a new album on i tunes and it will not download to my nano. Does anyone have any suggestions? Much appreciated. Thanks.
You may not have the iPod's Music tab set up in iTunes, which is how you tell iTunes how to automatically sync your iPod.
Select the iPod in iTunes. There is a row of "tabs" (starting with Summary). Click on Music there.
To use automatic syncing, the checkbox for Sync Music is checked. Below that, you can choose to sync Entire music library, if it fits. Otherwise, you can choose to sync Select playlists, artists, albums, and genres.
With the latter choice, you can create a selection of songs to sync to the iPod by selecting (checkmarking) playlists, artists, albums, and/or genres on the Music tab. For example, you can make a playlist in iTunes with all the songs you want on the iPod. That new album needs to be on that playlist, if you want those songs synced to the iPod. On the Music tab, checkmark that playlist.
When you Apply the change, your selection of songs sync to the iPod (replacing its existing content). Going forward, any changes in the iTunes Music library that are related to your selection of songs on the Music tab sync automatically to the iPod when you connect it, or when you click Sync.
Therefore, if you create a playlist with songs you want on the iPod, and select it on the iPod's Music tab, you can simply update that playlist in iTunes (add and remove songs), and those changes sync to the iPod automatically at the next opportunity. -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT
Maybe you are looking for
-
How to create a video photo stream in iPhoto?
I would really like to get the high resolution videos from my phone and iPad to my Mac. I would like them to go into iPhoto on the iMac. Is this possible? I can't figure out how to even get a shared photo stream to show up in iPhoto on the Mac. Furth
-
I got my iPad 2 64GB Wi-fi in July, and it's worked fine until the past couple of days. I keep getting an error that says "Safari could not display the page because it is not connected to the internet." Or something similar. Anyhow, my MacBook and
-
Hey everybody. I bought my neo 875P motherboard yesterday and installed it last night. I installed everything correctly. When i tried to boot, the monitor didnt get any input signal. The 4 leds where all green. I dunno how the 4 leds work. But as soo
-
How to incorporate LROs in ASO?
Hi all, Can someone please suggest if there some alternative ways to incorporate LROs in an ASO cube? Can text based measures work for this? Are there other ways like using VB Macros etc.? Thanks.
-
Hello, is there any summery of all the pre-configured Roles with its Role_ID and a description of each role? Best Regards, Sandra