Does anyone have a REFPROP already made library ready to be installed on cRIO?
The OS system on my cRIO is VxWorks RTOS, I do not have the right compiler to complile the .DLL file to .Out library for VxWorks systems, i thought some one might had done this already.
i have attached the zip file with all the infromtation required, I want to be able to run the "Refprop_Example_main.vi" from folder "Refprop_Example" on cRIO. (I can already run it on the Labview on my PC)
Attachments:
LABVIEW.ZIP 1938 KB
Why don't you stick with your original thread?
Why did you create/enter even more threads on the very same topic?
Please stop discussing in several threads in parallel. Keep things in just one place!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Similar Messages
-
Does anyone have issues with the instrument library?
I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?Just loaded the 6.0.2 update a few days ago. I was hoping it would fix the dropping of wifi where the 4g and 3g always kept. I have restored the router and I have even switched towers through AT&T's help, but to no avail. I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again. I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as being in my home most of the time. I am planning to take into AT& T store for a new one, just not happy with the wifi situation. It is sad that this cannot be fixed with an update. I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those. I hope At&T and Apple are reading these dialogs. Please let me know if fixes are on the way!
-
I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.
It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.
-
Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.
I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
-
Does anyone have URL replacement working for catalog generated from wiki pages library
Hi everyone,
I have created a catalog from a wiki library which surfaces news/event/announcement articles to a publishing site (with make URLs relative to this site selected). This works well after modifying the item page and specifying the content as HTML regarding
the functioning of category/item pages.
The only issue which remains is that hyperlinks between wiki pages are not replaced in the target site (they always point to the wiki pages within the authoring site collection rather than to their catalog counterparts in the publishing site). It is
my understanding that with publishing pages from a pages library these links are replaced to point to other items in the catalog connected site rather than the source.
Is this just by design (only working for publishing pages rather than wiki pages), or does anyone have this replacement working?
If this does not work it kind of defeats the purpose of the catalog here and I might as well give everyone access to the authoring library and just use a CSWP in the publishing site to redirect to the authoring wikis. Not terribly nice from a layout,
navigational or conceptual standpoint though.Just to add a bit more info to this... looking at the coreclient.log file you can plainly see that the page view took 50367ms to complete.... if anyone has any ideas, it would be greatly appreciated.
Started GET "/wiki/pages/V6C291y8z/price_lists.html" for 192.168.0.100 at Fri Nov 04 13:48:49 -0500 2011
Processing by PagesController#show as HTML
Parameters: {"title"=>"Production_Intercom.html", "id"=>"V6C291y8z"}
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner_link.html.erb (0.2ms)
Rendered cc/_banner.html.erb (1.8ms)
get_timezone_offset_from_request: -18000
time: Wed Oct 26 12:52:17 -0500 2011
time (client timezone): Wed Oct 26 12:52:17 -0500 2011
Rendered cc/_entity_header.html.erb (2.5ms)
Rendered cc/_wikieditor.html.erb (0.1ms)
Rendered sidebars/_tags.html.erb (59.0ms)
Rendered cc/_related_item.html.erb (0.0ms)
Rendered sidebars/_related.html.erb (0.3ms)
Rendered cc/_comment.html.erb (0.0ms)
Rendered sidebars/_comments.html.erb (0.4ms)
Rendered sidebars/_updates.html.erb (0.1ms)
Rendered sidebars/_settings.html.erb (0.2ms)
Rendered cc/_sidebar_section.html.erb (61.2ms)
Rendered cc/_sidebar.html.erb (61.5ms)
Rendered pages/show.html.erb within layouts/application (50366.0ms)
Completed 200 OK in 261847ms (Views: 50367.1ms) -
After updating the software on my I phone 4s it downloaded my entire i tune library to my phone. I have tried everything to correct this problem with no results. Does anyone have a fix for this. I do not want the entire lirary of music on my phone
BINGO! Thanks very much. Now I have to figure out why my video capabilities have disappeared
-
iPhoto keeps crashing! - then needs to repair the library. This is happening each time I import photos or even try to go in to an even and delete photos etc. Does anyone have any suggestions? Please it is so frustrating - I used to love iPhoto - now I regret upgrading to Lion
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
I was loading some CDs into my iTunes library when the disk drive refused to "suck in" the next CD. Does anyone have a suggest on how I might proceed?
Yes, that is a Catch 22. If you have another Mac you can connect your Mac to it in the Target Disk Mode, Transferring files between two computers using FireWire, and use Disk Utility on the second Mac to try to run the Hardware Test from there. Not sure if it's possible to a connected Mac though.
You can try this several times in the Terminal app and then see if a disk can be fully inserted:
Enter the following command followed by the Enter or Return key:
drutil eject
Do it several times and then try another disk. (A long shot). -
I downloaded photos from my camera to iPhoto 11. They were accepted as a new event. I deleted off the camera disk. Now, after going back into the events folder, the photos are not there. Does anyone have some useful advice? I've lost about 200+ photos...
You can recover the shots from the Card with an app like MediaRecover
As for the Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Does anyone have the link to report in app purchases made by a minor
does anyone have the link to report in app purchases made by a minor?
Click Contact Us at the bottom of this page, then click Contact itunes support
-
Besides the obvious, does anyone have any info. as to what this means:"Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
what do you mean by the obvious?, it's a permission issue, ARD must run as systems administrator to boardcast, tunnel IPv6 calls, etc.
-
Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?
I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
Try the Zimbra support forums. I found this excerpt from a relevant post:
http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
in which the following ports were suggested
ports 25, 465, and/or 487 to send mail.
port 143/993 to retrieve mail over IMAP -
Every time I sync my iPhone with iPhoto I end up getting duplicate photos on my iPhone. The other problem is that I can not delete the dups on my iPhone. Does anyone have an answer to this problem?
Mike whether I create a folder within the Pictures Folder that iTunes uses to sync photographs or just copy them into the main folder the result is the same, I end up with Photo Library plus another album containing an identical set of pictures as contained in Photo Library.
The User Manual for iOS5 states ...
You can create, rename, and delete albums on iPhone to help you organize your photos and videos.
Create a album: When viewing albums, tap Edit, then tap Add. Select photos to add to the new album, then tap Done. Note: Albums created on iPhone aren’t synced back to your computer.
Rename an album Tap Edit, then select an album.
Rearrange albums Tap Edit, then drag up or down.
Delete an album Tap Edit, then tap the delete sign.
Yes I can Add a new Album, but cannot delete an album already created. The delete sign does not appear.
In iTunes the only folder that I can see listed is the man one into which iTunes stores pictures, which I have named iPhone Photos.
When I look on my PC this iPhone Photos folder contains another folder named iPod Photo Cache and a multitude of folders created by iTunes, the named F00, F01,F02 etc etc. and a Photo Database file.
Now whether I create a seperate folder within iPhone Photos to store my favourite photos in, or just copy them all into the iPhone Photos folder without being encased within another folder, or create a folder inside the iPod Photo Cache folder the result is the same ...
I end up with Photo Library plus another album containing an identical set of pictures as contained in Photo Library.
I am going around in ever decreasing circles here and getting nowhere fast!! -
Does anyone have opinions about at
Does anyone have experience with or opinions about the free McAfee security suite offerd by At&t U-Verse? I would also ask the same about OpenDNS, which seemed to work fine on my old Mac. Thanks
The McAfee product is much worse than useless.
This is a comment on OpenDNS and other public domain-name system (DNS) services, such as Google DNS. You should use such a service if it solves a problem for you, and not if it creates problems you don't already have. To summarize:
1. Using public DNS will probably not make your network faster, and may make it slower.
2. It will probably not stop your browser from being redirected when you try to connect to a valid web address.
3. It will not make you safer from malware attacks.
4. It could cause confidential information to be compromised.
5. It has other privacy implications that you should be aware of.
A DNS server resolves the human-readable "domain name" of an Internet host, such as www.apple.com, to the numerical address by which that host can be reached. The process is analogous to looking up a phone number by name. There is no chance that changing the DNS server you use will have any effect on a network problem not related to name resolution.
There are two valid reasons why you might want to use a public DNS service:
The DNS servers provided by your ISP are misconfigured (perhaps deliberately) or don't perform well.
You have a use for the filtering controls provided by OpenDNS and others.
Although some DNS services are touted as responding faster than others, there will be no noticeable difference if your ISP is delivering what you pay for. Most likely, the difference in response time among the DNS servers available to you is on the order of a hundredth of a second or less. But under some conditions, public DNS will significantly slow down network performance. Here is a case in point.
A content-distribution network (CDN), such as the one used by Apple to deliver software updates and iTunes content, relies on the location of the DNS server to optimize performance. If your query goes to a distant server, you may get slow downloads of Apple content, among other things. From the report of a test carried out by a networking consultant:
We listed 9 CDNs that would benefit from supporting/using edns-client-subnet, and only two actually support edns-client-subnet: CDN77 and ChinaCache. Others, including Akamai, Internap and CDNetworks, do not currently. This really is too bad, because from the performance data we collected, it is clear these CDNs deliver (much) worse performance currently in many countries to Google DNS and OpenDNS users.
Another reason often given for using public DNS is to avoid "redirection," that is, false results from a query for a valid domain name. Ethical ISP's do not intentionally redirect valid DNS queries, though it might happen unintentionally because of a misconfiguration; for example, because the address of a network host has recently changed, or because of a "poisoning" attack on the DNS server. Note that many ISP's may, and OpenDNS certainly will, redirect invalid queries to ad sites, in violation of published standards for DNS.
Recently, a few low-quality commercial ISP's such as "CenturyLink" have taken to deliberately redirecting DNS queries for some domains, such as search engines. Do not tolerate this practice. If your ISP is doing it, then you should demand that the redirection be stopped, or else switch to another ISP.
Some ISP's have been said to route all DNS queries to their own name servers, regardless of where the queries were directed—another intolerable practice. I haven't heard that any commercial ISP is now doing this, but if yours is, you won't be able to use a public DNS service, even if you change the network settings on your computer or router.
Of course, if your Internet access is provided by an employer or institution, rather than by a commercial ISP, then you have to take whatever you get.
The claims on the OpenDNS website that it blocks malware attacks such as "Flashback" are false advertising. A DNS service does not and cannot block anything. All it can do is to selectively refuse to answer queries. It's trivial for a malware attacker to evade such controls. It's just as easy to evade the parental controls offered by OpenDNS. Nevertheless, you may find those control features useful, despite their limitations. Here is an example of an ASC user who had undesirable results from OpenDNS content filtering.
There is one limited exception to the rule that OpenDNS and Google DNS don't improve performance. The "prefetching" performed by modern web browsers, including Safari, may confuse some DNS servers, with the effects described in this Apple Support article. The article suggests testing OpenDNS, Google DNS, or another third-party DNS service as a possible way to overcome the problem.
If you need to switch DNS providers because of a misconfiguration of your ISP's servers, the change will most likely only need to be temporary. The problem may be resolved automatically within a matter of hours.
If you're considering whether to use public DNS, such as OpenDNS, on a long-term basis, you should take into account the privacy implications. As a user of the free service, you are not an OpenDNS customer, and the service provider—a for-profit corporation—doesn't have a contract with you. The marketers to whom OpenDNS sells access and information are its customers.
OpenDNS will know, and store, the address of every Internet server you use from now on. This is from its privacy policy:
When you use our Services, OpenDNS stores certain DNS, IP address and related information about you to improve the quality of our Service, to provide you with Services and for internal business and analysis purposes.
Concerning personal information, the policy states:
...[I]t is disclosed to entities that perform marketing services on our behalf or to other entities with whom we have joint marketing agreements...
You can't opt out of those disclosures. Read the privacy policy carefully and draw your own conclusions. The privacy policy of Google DNS seems to be somewhat more benign, but again, you should judge for yourself.
That's not the worst of it, though. The practice of hijacking nonexistent domains followed by most public DNS services could result in leaking confidential information to a hacker:
For example, consider the "same origin trust model" used for Web cookies. If you're holding a cookie for GOOGLE.COM and you can be fooled into following a link to KJHSDFKJHSKJHMJHER.GOOGLE.COM, and the resulting NXDOMAIN response is remapped into a positive answer to some advertising server, then you're going to send your cookie to that advertising server when you send your HTTP GET request there. Not such a bad thing for a GOOGLE.COM cookie, but a real problem for a BANKOFAMERICA.COM cookie.
NXDOMAIN remapping is not something that only happens when you randomly mistype a domain name. It can be exploited deliberately by malicious links placed on any web page. In the case of OpenDNS, the result would be that a cookie intended for another server would be sent to the OpenDNS web server instead. A rogue OpenDNS employee, or anyone who managed to break into the web server, might then be able to impersonate you on another website. If this scenario seems far-fetched, it's the stuff that network exploits are made of.
See also a brief, and somewhat outdated, critique of OpenDNS on a Harvard Law School blog, with a response from the company's founder. -
I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
Maybe you are looking for
-
what formula in numbers can I use when I want to know how much 19 % is of the numbers from (let's say) e6 up to e27 ? thank you
-
Error during execution phase of sps10 update in CRM system
Hi all, I am applying SPS10 on my CRM system and getting the following error during the execution phase. The system is running on Windows/MaxDB. ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/10 04:26:51") 2 ETP301 -------------------------
-
No update of Business Explorer 3.50 and SCM via Installation Server 6.40
Dear all We use SAP Installation Server 6.40 to deploy SAP Front End 6.40 and updates. For new installations, target systems will get the latest version of SAP GUI 6.40 (PL 27), Business Explorer 3.50 (PL 13) and Supply Chain Management add-on (PL 6)
-
Enabling Privilege Levels when ACS is Down
Hi, I have a requirement to fall back to local accounts when ACS is down. These accounts will have specific privilege levels. I have two local users - adminro and adminrw. adminro is read only and will have a privilege level of 7. adminrw is a full a
-
Eclipse OSB property window pop-up not opening
Hi All, I am facing a peculiar issue here.. I unable to open the pop-up on clicking any links or expressions in the property window of my Eclipse OSB editor. Have any of you faced this issues earlier, please help me in this regards. The Eclipse versi