Does anyone have a sample implementation plan that can be shared? High level?

You will probably need to inquire with a VMware consultant to get this kind of information. VMware depends on these people to make sure they keep the reputation of the software at a very high level.
They will have access to various free tools to help large and small scale deployments. Tools like VMware Health Check Script and the ESX deployment tool.
If you find this information useful, please award points for
"correct"
or "helpful".
Wes Hinshaw
www.myvmland.com

Similar Messages

Does anybody have a sample implementation of UserReaderMBean?

Does anybody have a sample implementation of UserReaderMBean?
It would be greatly appreciated

You should start with the sample security providers available from dev2dev.
In general, with the security sspi, you don't implement the mbeans directly - you write a provider class which contains the same method signatures as the mbeans, run that through the mbeanmaker, and that generates mbeans which delegate to your provider.
Regarding the cursor, see http://e-docs.bea.com/wls/docs81/javadocs/weblogic/management/utils/ListerMBean.html
Nobody says anything on what the cursor "should look like" - that's up to the implementor to decide. The motivation behind the cursor is that the list of users can be arbitrarily large and may not fit inside of memory. Therefore, the security provider needs to read in chunks of users at a time, and needs to have a way to refer to this list. Iterator pattern.
Take, for example, 100K users stored in a db. Can't read them all into memory. Can read in chunks of 1K users in arrays, and use the cursor to contain the index into the array, and the name of the last user in the array. E.g, to start things off,
select USER from USERS where ROWNUM < 1000
and then, when you finish the first 1000 users off, do
select USER from USERS where USER > ? and ROWNUM < 1000
the ? in this case would be the name of the last user read off in the previous query.

I've been working on our church website and suddenly, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]

My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?

My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?

The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]

Does anyone have a list of tracks that came free with itunes from the year 2000 onward, from memory they were on the G4 Tower OS install discs?

Does anyone have a list of tracks that came free with itunes from the year 2000 onward, from memory they were on the G4 Tower OS install discs?

Does anyone have a list of tracks that came free with itunes from the year 2000 onward, from memory they were on the G4 Tower OS install discs?

Does anyone have a spiraling rainbow image that appears and slow down you computer?

does anyone have a spiraling rainbow image that appears and seems to slow down the computer?

Everyone does at one point or another. Please be a little more specific about when this occurs. Also you may find Spinning Beach Ball of Death useful to track down the reason yours is occurring.

Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

I agree with Grant. But to answer your question, that would be Word 2008. A quick search turns it up on sale at Amazon. You'll need to find it somewhere other than Microsoft itself, since MS stopped selling it when they released Word 2011.
http://www.amazon.com/Microsoft-Office-2008-Mac-Version/dp/B000WR2F2M

Hi, I've lost all song data ( besides song name) on 1,100 WAV files. Does anyone know an app or fix that can identify Album & Artist (& maybe album art) on these files? Thanks

Hi, I've lost all song data ( besides song name) on 1,100 WAV files. Does anyone know an app or fix that can identify Album & Artist (& maybe album art) on these files? Thanks
Dermot

Hi John,
A major drawback with using wav for storage is that it doesn't carry a tag. This means that in the event of a corrupted library the only information remaining is the filename. Other data may be stored in the path but iTunes doesn't know how to get it. I understand that you need this format for your workflow with Diamond Cut, but that makes it all the more important that you backup your iTunes database on a regular basis.
Provided that you still have the tracks in their artist and album folders and haven't let iTunes "reorganise" them you should be able to restore some useful metadata using my script TagFromFilename. The script reads the path and filename, and provided these are in the normal layout of <Path>\<Artist>\<Album>\## <Name>.<Ext> can restore Artist, Album Artist, Track Name and Track Number. If your files have a different but predicatable layout with the same information, e.g. the data is all in the filename, then I could create a suitable version of the script to get the data into iTunes. I recommend you disable both the Keep... and Copy... options in iTunes advanced preferences before adding files to the iTunes database. Ideally you also want a complete backup of your correctly structured folders in case you need to pull copies back from it.
As stated earlier, uninstalling iTunes before the upgrade wouldn't have helped. The crucial thing before any upgrade is to backup all user data from the drive that will be wiped. Typically the iTunes database lives in C:\Users\<User>\Music\iTunes on Vista or Windows 7. The crucial file is called iTunes Library.itl. You seem fairly certain that you don't have a backup database that you could restore but an exhaustive search of your hard drive for files of the form *.itl might still be worth doing. If you find any apart from the active library we can discuss how you open them to see if they are useful.
tt2
PS The entire message in bold thing is a bit "shouty".

As of 2 months ago, I cannot fully access Facebook using either Safari or Firefox browsers. I have a Mac G5 running OSX 10.5.8, Safari 5.0.6 and Firefox 3.6.28. Does anyone have any sugesstions on how I can resolve this?

As of 2 months ago, I cannot fully access Facebook using either Safari or Firefox browsers. I have a Mac G5 running OSX 10.5.8, Safari 5.0.6 and Firefox 3.6.28. Does anyone have any suggestions on how I can resolve this?

Aha, a PPC Mac!
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a later version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html

Does anyone know of an iPad app that can lock the iPad after a period of months (i.e., 6 months)?

Does anyone know of an iPad app that can lock the iPad after a period of months (i.e., 6 months)? I am looking to give ipads to contestant participants and need a way to automatically lock the device once the set duration (measured in days, weeks, months or years) is complete. Does anyone know of an iPad app that locks the device after a period longer than 24 hours (ike most parental control apps)??
Thanks for any help!!

It's called "SelfControl". It can be a little hard to learn to use but it's worth the effort.

HT2693 I need to report a problem with a tv show that did not download correctly. 1episode file can't be found & the other has sound & no picture. I no longer have the email invoice to file a report. Does anyone have a sugguestion on how I can proceed?

If anyone has information on how to correct an issue with a tv show file not found after being downloaded and a tv show with only sound please help. I no longer have an email invoice to report the problem. Does anyone have a sugguestion on how to proceed?

iTunes store support
http://www.apple.com/support/itunes/

Does anyone have a new MacBook Pro that makes a buzzing sound on startup?

My new (60 days) MacBook Pro makes a buzzing sound on startup- does anyone else have this issue? Thanks!

Keep at the Genius Bar.
For one, you have a default 1 year warranty, which you do not want to let expire.
For another, that chine is a critical part of the system, that for some is an annoyance but at least it sticks around.
At some point, they have to either fix it or give you another (at least in my opinion they will eventually have to give me on that chimes).
Make a very good clone before you go back in. CarbonCopyClone ($40 download). You will need to clone it back onto a new system eventually, I suspect.

My question has to do with analog input and triggering? Does anyone have any suggestions on how i can improve the attached vi so it can trigger on a 50kHz ten cycles pulse after the pulse has been sent out on the output?

Could you just look at this vi and tell me if i am doing anything wrong? I get errors that are different each time I change something. here are the inputs I am using
Output Side:
amplitude = 1
freuency = 50kHz
Sampling Frequency = 1MHz
3 of Samples = 200
Input Side:
Input Buffer 4000
trigger type = analog
pretrigger = 5
edge or slope = rising
scan rate = 500kHz
# of scans = 2000
Conditional Retrieval
mode = on
slope = rising
skip count = 0
level = .1
offset = 0
hysteresis = 0
So what we want to do is capture the ten
cycles of the 50k output pulse on the input and need to store that so we can plot it later, do you have any suggestions. we are using the PCI-MIO- 16E board.
Thanks,
Jarrod
Attachments:
InputOutput2.vi ‏88 KB

1) Toss the sequence frames (no flames please).
2) Set you read and have it ready to trigger before oing the output.
3) After the output, go back and read the data that is waiting for you.
4) If you have errors tell us what they are and under what conditions they occured.
End of Ben's suggestions for now.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Does anyone have a report using cfdocument that produces a ledger type report with column headings?

I need to see some sample source code of a report with column headings and detail data. I can't get my column titles in the header to line up with the detail no matter what I do. Can anyone spare me a good sample?
I have tried to use tables to specify both col headings and detail, but no chance to get them to line up. There has to be a way. I can't use the report builder because I need more control of when page breaks print, what data is on each line, etc. Hopefully some kind soul out there has a good sample.
Thanks!
Dave

Your MBP is actually a mid-2010, not a 2008. That's what the 6,2 model indicates.There's an issue with the graphics module on that machine. There was a program in place to replace the motherboard within 3 years of purchase, but you're probably outside of that. Some folks have supposedly gotten theirs changed outside of that period, so you can try.
http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US
What you can do to use it is download gfxstatus from http:gfx.io and force the graphics to Intel. That would affect your work with Final Cut, but at least you might be able to use the machine.

Does anyone have a new ONT unit that does not make a beeping sound if you unplug the battery?

Hi everyone,
Anyone here that have a Verizon FiOS ONT unit that doesn't beep when you unplug the battery?
Apparently the new unit alarm noise is supposed to turn off when you remove the battery.
FiOS ONT Battery
I have an older model that continuously beeps if the battery is bad and if it's unplug. Basically, the box demands a new battery.
I called Verizon and asked them to install a new ONT Battery box because I believe the new one won't beep if the battery is unplug via their instructions. They are coming in a couple of days.
I just want some confirmation from users that the new box doesn't make the beeping noise if the battery is unplug.

You can now opt out of the battery at the time of install, if you do then the tech should disable the alarm at that time. Otherwise you can disable the alarm by removing the batter and THEN rebooting the system by unplugging the power supply while the battery is unplugged. you plug it back in and the system reboots and it should recognize there is no battery upon reboot and then it should not beep anymore. If it does still beep then yeah your going to need that dispatch.

Does anyone have a sample implementation plan that can be shared? High level?

Similar Messages

Maybe you are looking for