Does anyone have a script that embeds and downsizes the images placed in a file?

WEll?

Wouldn't this vary significantly from person to person, company to company? For example, we have a ton of starter scripts from previous projects and have an automate prompt generator, so a net new script would only take a matter of days, unless it's something very different than we've seen before.
Additionally, there are times that you want, newer people, to build something from scratch so they can have a better understanding of what they are doing and how UCCX scripting works. I guess I'm saying that what you're looking probably doesn't exist and if it does it will not apply to you very well.
david

Similar Messages

Firefox will not play .ogv video files when loaded from a server. Does anyone have any answers that will fix this?

I've read the suggestions for fixing this, and none of them work. I've updated my .htaccess to match MIME types for .ogv, I've uploaded the files as both Binary and ASCII, neither method works. The .ogv file plays fine when you load it from a local file, but it will not play when viewed from a remote server. I've confirmed with my hosting company that the .htaccess and all other issues for HTML5 are up-to-date. Safari and Chrome play the HTML5 videos just fine, but Firefox will not. Does anyone have any concrete answers as to what the problem is. I'm also serving up the video files as .webm and .mp4, but neither of these formats works in Firefox either.

That can happen if the server isn't configured properly to send the files with a by Firefox supported MIME type.
*https://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types
Did you check via the Web Console which headers Firefox receives when requesting the .ogv file?
If that is OK then it is possible that the file is using an unsupported coding method.
* https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements

Does anyone have experience for disk damage and loss?

Does anyone have experience for disk damage and
loss for B1? What's the procedure to get new one?
Any cost involved.
Regards,
Kenneth

Hi Kenneth
Usualy we take the strongest measures to avoid that and never let it come to that. You should of had back up's running on and off site. How bad is your problem?? I'm assuming you are talking abou a hard drive that is faulty. Have you tried restarting in Safe Mode??
You get experts that can retrieve data from a hard drive depending how bad the problem is. It usualy cost more than the Hard drive......but if you are desperate and value your data you'll do it.
Hope this helps

Does anyone have a chart that translates the new weather icons for the IOS7 iPhone?

There are many icons inside the new weather app in iPhone update IOS7 which are difficult to understand. Can you confirm our best guess that the weather for Wednesday and Thursday will be windy? Hope we are right. Does anyone have a chart that deciphers all of those symbols?

Thank you Templeton. Much apprecaite your answers and how swiftly they arrived. There are other symbols that we find confusing. I can't replicate more of them right now. But if you, or anyone knows of a chart that has interpreted most of them, I would be very grateful. I have beeen looking online for quite some time, and am surprised this hasn't been done...at the very least by Apple or Yahoo.
Best, Frederick

I am thinking of installing Lion, but my Quicken software will not be supported on Lion. Does anyone have an alternative that is as good as Quicken?

I am thinking of installing Lion, but my Quicken software will not be supported on Lion. Does anyone have an alternative that is as good as Quicken?

See this thread for a discussion of options.

Does anyone have information about external batteries to extend the hours on the Macbook Pro?

Does anyone have information about external batteries to extend the hours on a Macbook Pro?

Hypermac has been making external batteries for the MacBook for several years now.
http://www.hypershop.com/
You can google user reviews.

Take screenshot and saves the image to a PNG file

Hello,
How can I take screenshot and save the image to a PNG file?
thanks,
Avivit.
Solved!
Go to Solution.

this is a quite reproducible problem. Some more clarification on my part might help:
I have a loop that contains, among other this, (1) a sub-VI that prints-screen and saves as a png and (2) a sub-VI that emails me the png file as an attachment. The 1st sub-VI simply uses the user32.dll to simulate a print-screen key stroke, calls clipbpard get image, and then formats and saves the image to a png file using the built-in VI write-to-png. This loop should update this same png file, because the path does not change. However, I've noticed that while the loop is running the png file does not update. It simply keeps sending the 1st image it took. The image updates if the VI stops and is run again. I assumed the problem was either with the clipboard not updating or the file not writing.
I think the png file remains open while the main VI (i.e. this loop) runs because I cannot delete the file while the VI is running, only once it stops or is quit. Windows gives me an error that the file is currently in use by labview. Therefore, I think the file is not updated because it remains open.
I've attached the print screen VI. Feel free to stick it in a loop and give it a try if you don't spot something obviously wrong. I did not include the main-VI that I actually use since it contains a lot of instrument I/O, which would prevent someone testing the VI.
Attachments:
PrintScreen.vi ‏18 KB

Does anyone have an applet that runs on Windows CE and connects via jdbc to lite DB

I am trying to get an applet to connect to the Oracle lite DB
I use
     if (conn == null)
     // Load the JDBC driver
Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
     conn = DriverManager.getConnection ("jdbc:polite:polite", "SYSTEM", "MANAGER");
     output.appendText ("Connected\n");
but CE just echos oracle.lite.poljdbc.POLJDBCDriver and does not connect.
Does anyone have any working samples? I am using Jeode JVM on the CE device

We have the same problem with that platform, but we get a
java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.oljdbc40)
exception.
Thank you in advance.

Does anyone have any idea how to find out the version of weblogic plugin

Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
I could not find version in plugin directory.
it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
Sun One 6.1 SP6
Weblogic 9.2
Solaris 5.10
Edited by: 985608 on 01-feb-2013 8:20
Edited by: 985608 on 04-feb-2013 6:25
Edited by: 985608 on 04-feb-2013 6:27

Hi,
You can find version of weblogic plugin using below command.
strings <plugin module file> | grep -i wlsplugins
Mark if this helps.
Regards,
Kishore

Does anyone have a PC that can successfully use an Airport Extreme?

All PC units can not connect to my AirPort extreme wireless network. All iPods and Macs can connect just fine. Does anyone know what could cause this or heard anything like it?

jared_e42 wrote:
I would check the security settings, sometimes older (or poor quality) wireless cards have trouble with security. I would also make sure that the airports have updated software/firmware on them. Usually, the AP Utility will warn you if it doesn't have the most recent on it.
No warnings, firmware is up to date
If you remove the password, and they can join & get an IP; then try the various settings to see what doesn't work. WEP usually for PCs sometimes requires the obnoxious 24 character translation passcode.
I have tried to remove the password and make the wifi completly free to any PC to connect to it, but it's still gives me the same problem.
I am also assuming that this PC can join OTHER networks, and it isn't a problem with the wifi card being off or broken.
Correct.

Does anyone know a script that copies transformations of a frame?

I'd like a script where all the frames selected on a spread can copy an original frame's transformations. So, for example:
I have 3-5 photo frames at different sizes and spaced unequally. I set one frame to be a perfect square with a photo filled proportionally. Set the stroke to 1 at registration black. Now, I'd like the other frames to be exactly the same (but holding different photos) and spaced at 1 cm vertically and horizontally from each other. Is this possible? If so, how do I go about either creating the script or better still, buying it?
"Transform sequence again individually" command just doesn't work for me and is too time consuming.
Best and thanks for the help.

I'm not sure that I have a clear picture yet of what you are trying to do, but does the ImageCatalog.jsx script that comes with InDesign do something similar to what you need?

Does anyone have a script to place image on desktop into image opened in CC 2014?

I'm trying to batch a group of images that need to refer to some crop guidelines that need to be placed on the top of each image. The crop keeps getting changed by the client, however, so I need to place these at the end of the project. Any help will surely be repaid at the Pearly Gates.

That’s the first you mention of transferring multiple Layers – that is very likely gonna need a Script.
If the layer is one object, then there won't be any differentiation of the crops.
What does this mean exactly? Maybe you could explain the process in more detail.
What is the exact Layer structure of the file from which you need to take the Layers and how are portrait and landscape images to be treated differently?
Photoshop Scripting

DOES ANYONE HAVE AN IPHONE THAT MAKES...

Coffee for you in the mornings? Haha, just kidding about that, but I really do have an interesting issue. The other morning I received a phone call from a friend...I answered it and all was great, but it brought me back to the main screen and not the passcode screen. I have that feature on, and I just turned my iPhone on. How in the world did it "unlock" the passcode without me doing anything? Now if you thought that was weird, what about this issue. So I turned the iPhone off and back on again and it was perfectly fine even after I got a call, back to normal right? Well not quite. That afternoon, I typed in my passcode and it didn't MOVE at all, It was sorta "stuck" with all 4 numbers in place...I actually could type in 4 numbers and get no response, so I delete all 4. Type it in again and it clears the entire thing out saying nothing like invalid, I type it in again and it goes. Why do I need to type the passcode in twice sometimes? It just started to happen and I didn't change any setting recently. I appreciate the advice. I will try to restore it when the next update comes out, but I just don't have the time. I have the 8 GB model.

I sort of recall having an issue unlocking long ago (couple of firmware versions ago). Have also had crashes of Safari or Maps. Have had SMS not open for me. Various things. Reset always fixed it. As each firmware comes out, I have had less issues but like I mentioned in that thread I linked to, I do a reset at least once a week just to do one. That alone could be why I am getting less issues.

Does anyone have a screen that has a light dot on the side of the Ipad 2 that when you touch it, it enlarges?? What should I do if anything??

Does anyone know about why I have a small light dot on the right of my screen that expand when I press on it? It lights up when I touch it more. What if anything can I do? I have had my ipad for over a year now.

Not much you can do now. You should have taken it to an Apple Store before your 1 year warranty expired.
 Cheers, Tom

Can't open some web pages... DOES ANYONE HAVE A FIX THAT WORKS?

I'm unable to open certain web pages. The pages will start to open and than the application will just stall. This seems to have coincided with downloading a security update a while back. I've tried downloading firefox and it too will not open these specific pages. I've searched the forum and as of now I can't find a solution. From what I've hear, Apple isn't even acknowledging that there is an issue. I've repaired permissions, deleted Safari plist files, all with no improvement. I know for a fact that it is not my internet connection, as my powerbook can navigate to these sites without any issues, however my powermac seems to have "forgotten" how to open some web pages.
Any fixes would be enourmously appreciated!

Thanks for the reply.
I don't think that reporting the pages to apple would do much good as it's not the pages themselves that are the issue, it's something on my system that prevents them from opening up properly. My laptop will open the pages without any issue, however my desktop isn't able to for god knows what reason. I know others on this board have had similar problems.

Does anyone have a script that embeds and downsizes the images placed in a file?

Similar Messages

Maybe you are looking for