Does anyone have an idea of how to create custom gestures in DPS?
Have any of you heard if Adobe will be allowing custom gestures (2-4 finger, different directions, unique movements, etc.) in the DPS InDesign software? Or, does anyone have a work around for integrating custom gestures. Here's an example, slide shows swiping that is triggered off an top to bottom gesture vs. side-to-side. Thanks much you guys!-
I created hours, minutes and seconds in three separate layers and lined them up to look like a digital readout (09:07:58PM) For the seconds, I typed in 59, 58, 57 and so on with a hard return after each. Then I keyframed the Y position of that layer to stay static for 1 second, and then increase over the course of 1 to bring up the next number. Then in Keyframe Editor, I chose After Last Keyframe>Progressive. The clock now counts down second by second. You could do the same for minutes and hours if your clock is on screen that long.
Similar Messages
-
I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071 -
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
Hi. I can't get the flash on my iPhone 5 to work. Does anyone have any ideas on how to troubleshoot this. Any help would be appreciated. Thanks.
Tap Camera App > switch to video > see if the flash will turn ON. If still problem, Restore your iPhone with iTunes on computer. See if fixed. If still problem, your iPhone has full Warranty with Apple.
-
My ipad's screen has gone completely blank. I can't see anything. Have attempted to update and restore it, but to no avail. Does anyone have an idea on how to resolve this issue?
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My IPad has disconnected from my home WiFi and will not accept my password. Does anyone have any ideas on how to fix this?
I would
1. turn off the router for 30sec and connect it to see if it fix it
2. restart the ipad by holding down the on and home button and use the slider
3. update the firmware of the router -
My daughter can't remember her itunes id or password. She wants to access her account to retreive her song library.
. We tried retreiveing by using old email accounts. No luck so far. Annyone have any ideas on how to retrieve her account info?rsackawicz wrote:
My daughter can't remember her itunes id or password.
click here and follow onscreen instructions. -
Flickr uploading is a horrible experience. Does anyone have any ideas on how to make it better?
I am using iPhoto and I amd trying to upload several undred pictures to Flickr at a time.
The native iPhoto exporter hangs and crashes.
The Flickr Exporter plugin by ConnectiveFlow does the same.
The web based importer will also do the same and it can only do 200 pictures at a time.
I am considering Apeture, but does anyone have better experience with Apeture's native uploader?
ThanksI don't believe there's a solution to that. I don't believe there's a way to upload hundreds at one go. But you could contact Flickr support and see what they suggest.
-
If I happen to be on FaceTime with someone and I press the menu button, it automatically ends FaceTime and its not supposed to. Can anyone help me?
If you have to do other things on your phone, you are going to have to exit the facetime app. If you don't need to see their face while talking to them, why not just call them and put it on speaker phone?
-
All I get is a blank home page, along with a spinning beach ball. I cannot open the preferences to try to clear the cache, and must force quit to get out of Firefox. I have tried clearing the cache from the Library, and trashed the preferences file. I uninstalled the application, and reinstalled a newly downloaded application. I have restarted the computer many times, and run the disk utility to repair permissions. Nothing has worked. I have not added or upgraded anything on my computer since Firefox was working just a few days ago. Safari works fine connecting to the web. I have read through most of the support documents at Firefox Help, but cannot find anything that addresses this specific problem of hanging immediately after launch.
I have the exact same problem--and it just started around November 11, 2011. I have rebooted, reinstalled, and relaunched many times and Firefox just hangs on launch. Spinning beach ball of death and all that.
I have not installed any new software or changed anything on my computer.
Using Mac OS X 10.6.8, Aluminum Mac with 2.4 GHz Intel Core 2 Duo, 8 GB RAM. -
Has anyone seen the below error before? Does anyone have any ideas on how to
go about troubleshooting it? I am using a PCI-GPIB card on a WIN95 machine in an attempt to communicate with an
ESP300 Universal Motion Controller ver 3.03. which reponds to ASCII commands.
As a basic first step (using LabVIEW 6.0.2) I first attempted the example on p.20-6
of the LabVIEW ver 6 Measurements Manual. I passed the string "*IDN?".
I get the following error from the Simple Error Handler:
Error -1073807339 occurred at VISA Write in esp300_scott1_mod4.vi
Possible Reasons:
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed
In a second attempt I tried using LabVIEW version 5 with the example on 8-12 of the
User Manual, here I g
et the same error from the Simple Error Handler:
Error -1073807339 occurred at VISA Write in esp300_scott1_mod4_ver5.vi
Possible Reasons:
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed
N.B.--> I have successfully used NI's Measurement and Automation Wizard to communicate
with the instrument. When I pass the string *IDN? I get the response:
ESP300 Version 3.03Your best VISA troubleshooting utility is the VISA Interactive Control (nivisaic.exe). From this utility, you can use the VISA protocol to communicate with each of the VISA resources available on you system. If you are unable to get this utility to properly recognize or use your NI-GPIB card, It may be suggested to uninstall/reinstall the NI-VISA distribution. If you can get the utility to work then there is a programmatic problem which you must address. Debugging programmatic issues is best troubleshot using the VISAIC utility, NI-SPY (nispy.exe), and highlight execution. If you can outline a flow from within VISAIC, using NI-SPY you can log this flow and attempt to emulate it from within LabVIEW. Make sure each of the functions has the proper inputs. Also, try usin
g some of the VISA/GPIB examples shipped with LabVIEW.
Ryan Mosley -
Does anyone have any ideas on how to help me with my "frozen" Neeon
It's driving me crazy! I've tried everything but nothing is working......Cheers
Umm... I can't see anything that resembles a reset button, just have the on/off, the scroll wheel, USB/headphone/line-in holes, the volume keys and the locking slide....
-
Does anyone have any notes on how to create a module pool?
Hi,
I have created a new task type called "Notice Period Change Date" which I need to default in a task date of 5 years service (from their hiring date). Having read up on this I think I need to create a module pool and link via the dynamic action but I am a bit unsure on how to do this.
Any assistance would be greatly appreciated.
Thanks
HannahI think that you could use a dynamic action to create this new task date.
Create the dynamic action on the infotype 0000 when the action type (MASSN) = hiring,
Call infotype 0019 with the subtype = your new task type.
Then call a function (F) to add 5 years to the hire date (P0000-BEGDA) and put the result into the task date field P0019-TERMN
Take a look at the dynamic actions table T588Z - there are probably some examples already there.
Mark -
Anyone have an idea on how to create...
...a time clock effect that will be on a video clip(sort of like a security videocam or a videocamera's display) with time running(hours,minutes date as well) by. I've tried TIMECODE GENERATOR in FCP but have no luck in establishing a specific time frame I:E 2:25 P.M. or 14:25. Thanks
I created hours, minutes and seconds in three separate layers and lined them up to look like a digital readout (09:07:58PM) For the seconds, I typed in 59, 58, 57 and so on with a hard return after each. Then I keyframed the Y position of that layer to stay static for 1 second, and then increase over the course of 1 to bring up the next number. Then in Keyframe Editor, I chose After Last Keyframe>Progressive. The clock now counts down second by second. You could do the same for minutes and hours if your clock is on screen that long.
-
Does anyone have any idea how to find out the version of weblogic plugin
Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
I could not find version in plugin directory.
it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
Sun One 6.1 SP6
Weblogic 9.2
Solaris 5.10
Edited by: 985608 on 01-feb-2013 8:20
Edited by: 985608 on 04-feb-2013 6:25
Edited by: 985608 on 04-feb-2013 6:27Hi,
You can find version of weblogic plugin using below command.
strings <plugin module file> | grep -i wlsplugins
Mark if this helps.
Regards,
Kishore
Maybe you are looking for
-
Having problem with javax packages
i had problem with compiling my program which is java servlet, and it is complaining that it does exist javax servlet * package , how can i solve this problem?
-
How do change the Apple ID to an email address that is current?
I used and Apple ID when i first started. I now no longer have access to that email address due to it's curruption. I would like to change it to a new and more secure one. Is there a way to do so? thanks.
-
Photoshop cs3 trial - Vista - Won't extract
Hello, I'm having trouble getting the trial i downloaded to extract onto my system. It tells me i either haven't got enough room or administritive privileges to run the set-up. Both of which aren't true. any help someone could offer me? edit: this is
-
Hello, i have SB li've external and i have problem with USB bandwidth, but i found this: Li've External not support USB 2.0, and USB. have not enough bandwith. So if I select in speaker settings "5." quality can be only 6bit. Is it true? How can I li
-
Is there any way to disable right click and drag and drop for photos on iweb?
Re: protecting photos when using iweb as your web designer... Is there any way to disable right click and drag and drop for photos using iweb? I have seen tutorials about creating a text box around each image - but is there a better way?