Does anyone have any info on MacKeeper?

Hi,
I was prompted to install MacKeeper prior to shutting down last night, but now I'm questioning if this is actually an "Apple" program or is someone trying to phish my system?
Does anyone have any information on this?
Thank you!

Ralph Landry1 wrote:
I don't want to get into the thick of this debate, some people on here I respect and trust for judgement, but there is a lot to be said, and not said nicely, about software that pops up on you and declares your computer to be infected witih viruses...as though it could tell when it does not actually have access to your computer.
I believe you are referring to MacDefender, not MacKeeper. It is an honest mistake - one I made myself. Then someone called me on it and I had to re-evaluate the advice I had been given and had accepted unconditionally, without testing it myself. One thing led to another and here I am.
And when some good people like Phil Stokes go to great lengths to devise a procedure to completely remove a program like MacKeeper, and make it available free of charge, it gets my attention.
I suggest giving it more attention. Install MacKeeper and then remove it. Then re-evaluate Phil Stokes' scary-sounding instructions on how to remove MacKeeper cache files and log files.

Similar Messages

Besides the obvious, does anyone have any info. as to what this means:"Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."

Besides the obvious, does anyone have any info. as to what this means:"Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."

what do you mean by the obvious?, it's a permission issue, ARD must run as systems administrator to boardcast, tunnel IPv6 calls, etc.

Does anyone have any info re 3.5mm jack microphones on the Mac Pro?

Please, don't refer me to the manufacturer...am working on that, in the meantime i'm looking for anyone that might have OTHER information or suggestions regarding this issue...
Bought a GE PC Microphone, a very simple on with a 3.5MM jack. The package specifically says "Compatible with Windows, Mac, and Linux operating systems"
I plug it into the Audio Line In on the back of my Pro (just purchased barely a few weeks ago) and the nothing happens...no sound is registered or recorded.
I've gone to preferences pane and selected "Line In" as opposed to "Digital Line In", and nothing....
Is there some silly thing I'm over looking. When I read the Mac Pro User Manual regarding that particular port it refers to use of:
" Analog audio line-in port
Connect self-powered microphones, MP3 and CD players, and other devices with analog
capability"
The mic is simple, has no power source, only the 3.5MM jack...should it not work?
Any help (other than the already perfectly obvious contact the mfr of the mic, or plain old return/exchange the mic" will be greatly appreciated. If that's what i have to do ,it's what i'd have to do, but i'd like some validation that there is NOT anything I am missing before doing so.
Thanks!

Hi JamilMereck,
first of: you can edit previous posts in a time-frame of some minutes (haven't measured it ...).
After that they become non-editable.
I admit I have used microphones some years back with and without PCs (have switched to Macs 2.5 years ago).
But I always had the mics connected to a mixing desk, which provided Phantom Power.
Since I gave up my 'Singing Career' (wasn't good enough) I also abandoned the use of microphones.
To your questions:
It might be that PCs with specified Microphone-In ports are also providing power to them or the microphones themselves do not need any power.
And the 'compatible with...' refers to the usage on computers in general.
The iMic from Griffin works with OSX 10.5 (scroll down on the webpage to 'Product Compatibility' the left icon symbolizes OSX 10.5).
As said above, I am no longer up-to-date in usage of microphones, but when you want to use a microphone with the standard connector you have to get either a microphone preamp or a mixer.
If you use the mic only (really only) with your Mac Pro, you might wanna look for USB-connected mics from Samson or Audio Technica for example.
And don't get upset, I understand you fully and any kind of 'insult' is for the manufacturers and not for me
Stefan

So does anyone have any info on if apple know about all the problems with the iTunes update?

By problems I mean:
. The unability to sync music from your laptop/computer to your apple device
. The slowness
. Unable to log in
. Being told that the laptop/computer being used isn't recognised
. Clicking on music and it flicking through really quick without playing and then not playing after, but still being on apple device.
+ all the other problems i've seen mentioned on this page. It's pretty clear the new updates have glitches that urgently need fixing and a lot of people are encountering some or multiple of these problems.
I've not seen or heard any announcement whether they know or not or if they're doing something to fix this, because they need to. Urgently.

Hi JamilMereck,
first of: you can edit previous posts in a time-frame of some minutes (haven't measured it ...).
After that they become non-editable.
I admit I have used microphones some years back with and without PCs (have switched to Macs 2.5 years ago).
But I always had the mics connected to a mixing desk, which provided Phantom Power.
Since I gave up my 'Singing Career' (wasn't good enough) I also abandoned the use of microphones.
To your questions:
It might be that PCs with specified Microphone-In ports are also providing power to them or the microphones themselves do not need any power.
And the 'compatible with...' refers to the usage on computers in general.
The iMic from Griffin works with OSX 10.5 (scroll down on the webpage to 'Product Compatibility' the left icon symbolizes OSX 10.5).
As said above, I am no longer up-to-date in usage of microphones, but when you want to use a microphone with the standard connector you have to get either a microphone preamp or a mixer.
If you use the mic only (really only) with your Mac Pro, you might wanna look for USB-connected mics from Samson or Audio Technica for example.
And don't get upset, I understand you fully and any kind of 'insult' is for the manufacturers and not for me
Stefan

Does anyone have any info or used this graphics card?

Hi all,
I'm trying to find a way to hook up my Play Sation 2 to my Mac (since I don't have a TV) so that I can use the display that I have to play games on. I found this card but I can't find anyone who knows anything or reviews about the Alchemy TV DVR card here is the link;
http://www.miglia.com/products/video/alchemytvdvr/index.html
This one is in my price range and on the surface looks exactly like what I'm looking for. Do any of you know anything about this or something around this $$ range that will work? Thanks again in advance for all the help, and any would be great.

well...i have no clue why spending $50 on a cheap TV isnt on your mind instead of investing in that AlchemyTV DVR (which isn't really a graphcis card).
sure the card sounds awesome, capture analog TV and record TV onto your HD.
just like some tivo but for your Mac.
good luck.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

Hi - I have just bought my first IPAD and I need to transfer from my MAC a 'recipe file' consisting of many, doc and docx files - I have also just bought Keynote to do this but I can't seem to transfer,, does anyone have any suggestions? Thanks

Hi - I have just bought my first IPAD [3 rd gen, no wifi] and one of the things I want it to do is to accept transfered word files
preferably as folders from my MAC - I just bought Keynote but it doesn't seem to work. My files are all doc and docx so I think
perhaps looking into it more I should have bought Pages instead,, but I don't want to spend more money on another app if
possible. Does anyone have any suggestions?

You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?

First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz

TS3276 I've tried everything in this article and still can't send or receive email. I also contacted my provider and everything is working on their end. Does anyone have any suggestions?

I've tried everything in this article and still can't send or receive email. I also contacted my provider and everything is working on their end. Does anyone have any suggestions?

Went to Apple Genius Bar. Info from them plus my provider resolved the issue

My MacBook5,1 pro screen blinks during startup. Does anyone have any suggestions?

I bought my Mac in December 2008 and for the first time today, I see my computer screen blinking when I started up the computer. Does anyone have any recommendations?

When you say the only tool available was to restart... do you mean Disk Utility wasn't there?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
I also tried safe booting and holding down the options key..
Shift key invokes a "Safe Boot", the Option key should bring up the Boot Options screen where available boot drives are shown.
Do you have another Mac with Firewire around and does this one boot into FireWire target disk mode...
http://support.apple.com/kb/HT1661
If so this Mac will look like a big Firewire drive to the other one, and if the other one is the same OS or higher you can try Disk Utility on the other one to attempt repair of the iMac's drive.

My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??

My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My computer is loud when the fan is running. Does anyone have any suggestions?

My computer is loud when the fan is running. Does anyone have any suggestions?

Hello,
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

I've just upgraded to IOS 7.0 on my iPhone 5 and the calendar is horrible! I want to be able to see the who day at a glance not a few hours. Does anyone have any suggestions?

What's happened to the calendar in IOS 7.0? I would like to be able to see the whole day at a glance not just a few hours. Any suggestions?

I know what it looks like and what it does. I need to be able to see the whole day! A few hours is not helpful for knowing whats ahead. I don't want to scroll I just want to be able to look at a glance. Does anyone have any helpful suggestions.

After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

Welcome to the Apple Community.
Which OS are you using.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Does anyone have any info on MacKeeper?

Similar Messages

Maybe you are looking for