Does anyone have ASR 2.2.5 for mac os 9?

im looking for this ancient version of Apple Software Restore for use with mac os 9.2.2
i use alot of vintage software and i have been having some type of hard drive corruption issue
and i need to make a backup of my system so that i can restore it in the event that the filesystem becomes corrupted again
untill i figure out which application is causing this error
the only way i can deal with it is to clone my drive and restore it
but i dont want to use any mac os x software
ASR has a limit of 2GB but the later version has a filesize limit of 4GB which would probably be enough
whereas 2GB is not...
please im desperate for this app.. i cant find it anywhere
if u know any mac systems admin guys that were managing large amounts of g3/g4 computers
they would probably have this...
fingers crossed that someone can help me find this hard to find updated version of this app
versions i have so far:
v1.3.8 (included in many developer kits for os9)
v2.1.2 (included in 'automate asr 1.0' app found on macupdate)
v2.2.4 (given to me by a friend, but incomplete without applescripts)

You might find it here:
http://ftp.iinet.net.au/pub/apple/US/Macintosh/System/

Similar Messages

Does anyone have a data recovery solution for recovering photos lost after ios8 install?

Does anyone have a data recovery solution for retrieving lost photo stream photos after installing ios8 on iphones and ipads?

Does anyone have a data recovery solution for retrieving lost photo stream photos after installing ios8 on iphones and ipads?

HT3275 does anyone have step by step instructions for how to replace .sparsebundle to make time capsule with time machine work again. i accidently deleted it thank you

does anyone have step by step instructions for how to replace .sparsebundle to make time capsule with time machine work again. i accidently deleted it thank you

Error message Pop-up reads:
Time Machine could not complete the backup
The backup disk image "/Volumes/Data-1/myname.sparsebundle" could not be accessed (error - 1)

Does anyone know a good developer magazine for mac development

Does anyone know a good developer magazine for mac development I will be happy to get multiple answers

K T wrote:
And the fact that it's was a vertical, slow-moving, dead-tree, subscription-driven, ad-based business model has nothing at all to do with it... Mac mags died a long time ago, for good reason - get over it
I guess I don't really agree with that. There are still a few Mac magazines around. Interestingly, they are often magazines from the UK. I find it funny that there isn't a big enough market in the US to support homegrown Mac magazines, but they continue to print them in the UK with a much smaller market, and ship them over here. But I digress. I do think the points you cite for the demise of Mac magazines are all incorrect. The same system works just fine for any number of other magazines. The difference is the reader...
Google is your friend.
Now I greatly disagree. Not only is Google not your friend, but it (or rather the internet - it gets hard to tell the two apart anymore) is turning into a massive source of disinformation. There was a time when programmers were expected to read the manual, read magazines, and try things out in order to figure out how to do something. Now, we are expected to just Google it.
Well, I do Google things on a regular basis and I find the advice dispensed to be wrong or otherwise useless more than half the time. Google is on the way out. Information networks are the wave of the future. That is why people come here. Apple Discussions is more reliable than Google.

Does anyone have a set of .VIs for talking to a generic modem?

Hi and thanks for reading.
I don't want to have to know AT commands, just what I want to do. Such as go off hook, dial a number, wait for answer etc.

Stan,
Maybe the attached VI will help. This VI library contains utilities to talk via the serial port to a modem. Sending standard Hayes-compatible AT commands to the modem allow it to dial a number, send data, hang up, etc.
If you have the Internet Toolkit, it assumes you already have a valid TCP/IP connection. However, many web browsers such as Netscape and Internet Explorer have auto-dialing options that will start dial-up networking automatically when you launch your browser. The only trouble is that the auto-dial wizards can require the user to push buttons, but there is a Shareware program called DUNCE which will take care of the button pushes for you in the auto-dial wizards so the user does not have to intervene in the dial-up process.
You can la
unch the browser from LV and then have the browser configured for auto-dial and that should take care of the problem. I did not actually try this out myself, but in theory, it should work.
Zvezdana S.
National Instruments
Attachments:
Modem.llb ‏334 KB

Does anyone have a orajox9.lib needed for ncomp?

I have question regarding setting_os.properties file. It has LINK_COMMAND looks for $(oracle_home)/lib/orajox9.lib but in reality, there is no such file. Is it a bug? Since ncomp.log has LINK FATAL ERROR because it couldn't find the lib file to link. Beside, ncomp is supposed to create a dll file in oracle/aurora/deploy but it doesn't. I am not sure whether this is related to the missing orajox9.lib
Thanks for any response.

Stan,
Maybe the attached VI will help. This VI library contains utilities to talk via the serial port to a modem. Sending standard Hayes-compatible AT commands to the modem allow it to dial a number, send data, hang up, etc.
If you have the Internet Toolkit, it assumes you already have a valid TCP/IP connection. However, many web browsers such as Netscape and Internet Explorer have auto-dialing options that will start dial-up networking automatically when you launch your browser. The only trouble is that the auto-dial wizards can require the user to push buttons, but there is a Shareware program called DUNCE which will take care of the button pushes for you in the auto-dial wizards so the user does not have to intervene in the dial-up process.
You can la
unch the browser from LV and then have the browser configured for auto-dial and that should take care of the problem. I did not actually try this out myself, but in theory, it should work.
Zvezdana S.
National Instruments
Attachments:
Modem.llb ‏334 KB

HT1414 Does anyone have step by step directions for some one who does not understand technology very well.

My aunt was trying to update her iPhone. She had never done an update before and doesn't get technology at all. She lost everything in the update. I believe what happened when it asked to restore as new phone that's what she selected. Does anyone know how she can get her old stuff back now. Like dummy proof step by step directions she can just follow along. PLEASE!!! I know it's so simple but I live 1,800 miles away and she can't follow over the phone. I NEED help

It's easily done via email addresses. One party calls the other via their email address. This is done automatically in Facetime.
iOS- Using FaceTime
FaceTime for Mac- About HD video calling

Does anyone have a site survey config for autonomous 1142 AP?

We're going to start using the 1142s as our survey access points. We use autonomous 1242s now and I'm wondering if anyone has any canned 1142 configs they're willing to share.
Thanks in advance!

Scott,
I've always surveyed with power local = 14, which should be 25mw. I use channels 1,6 & 11, of course for 2.4 GHz.
Also use 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 as my data rates.
My goal is to take two surveys of the same building - a small building, that is. One survey with the 1242s, and the second survey with the 1142s. I want to compare the coverage to see if the 1142s do better, etc.
I've heard you just don't "swap out" the 1242s for 1142s or 3502s, but that may be just what we end up doing for simplicity. And I agree, if we were going to forklift to the 802.11n APs and forklift the clients, we could survey to 802.11n since we would not have any 802.11g clients to worry about. But that's just not the case since we do not control what clients come on our network. So we almost have to design to the "least common denominator".
Thanks!

Does anyone have a ready made solution for this?

http://weblogic-wonders.com/weblogic/forum/#/20110128/monitor-weblogic-ssl-certificates-333161/

Nice site, looks good too!
You can do something like the following:
InputStream inputStream = new FileInputStream(new File(locationOfTheKeyStore));
KeyStore keystore = KeyStore.getInstance(type); // where type is a String containing either pkcs12 or jks
keystore.load(inputStream, password.toCharArray());
Date creationDate = keystore.getCreationDate(alias); // where alias is a String of the certificate alias in the keystore
Calendar calendar = Calendar.getInstance();
calendar.setTime(creationDate);
calendar.add(Calendar.YEAR, 1);Now you have the creation date - you probably know how long a certificate is valid (for example a year), which you
can add to the creation date.

Does anyone have a frequency response graph for macbook pro inbuilt mic?

like the title says, any freq. response graphs? and any other performance specs on the mics? want to find out if I could use it to acoustically test a room, witht he right clibrations

Boot Camp Assistant is part of OS X.
You will have to talk to Microsoft about where to get a copy of Windows at.
Allan

Does anyone have a gmpc-svn package for me?

I'm trying to build gmpc-svn but the current configure script is broken.
Who's got a recent package for gmpc-svn I can download? Thanks a lot in advance.

Check the AUR for gmpc-plugins-svn!
When I first ran gmpc-svn, I got a cool track listing of the current album under "Information" but that doesn't work anymore. Any ideas?
[edit]
Found it: gmpc shouldn't be in mini or playlist mode. Just regular gmpc.
[/edit]

Does anyone have an install disk/download for Design Standard (CS3)?

Adobe's Customer service referred me here to try to find someone that has the program because they only keep the most updated programs. I have lost my install disk and need to reinstall the program on my computer and cannot afford to buy the new programs. I have all my purchase information that I need to register the programs... I just need the install software. Please let me know if you can help me. Thank you!

You're in luck but you'll have to download it.. go here and if that doesn't work try here.

Does anyone have an e-mail address for Apple customer service?

I received some pretty bad customer service today, and I want to voice an opinion on it.

If this occurred at an Apple Store your best bet is to contact the store's manager and discuss the situation.
If it was an on-line or telephone transaction see the Contact Us link at the bottom of this page for information regarding contacting Apple.

Does anyone have a contact email / phone for iTunesConnect?

Created an account.
4 days later, tried to log in. No go. Perhaps wrong password. I think I'm locked out of iTunesConnect. Would like to get some help. No contact email/phone visible. Suggestions?

No you do not need a viewing card, you need the multicast update, which is probably why you never received a card.
You could try this, it might work for you:
http://bt.custhelp.com/app/answers/detail/a_id/42451/~/problems-installing-the-new-look-bt-vision-so...

Does anyone know what software was used for Mac Welcome Video?

As you may remember when you turned your mac on for the first time, a ver neat welcome video played with upbeat music. Well I just wanted to know if anybody knew what program(s) was used to make it. If you know or have any idea please tell me. Thanks!

Hi and welcome to discussions. I tried to find something about it, but was not successful. I would guess though that this has been made using some of Apple's own software, everything else would not really make sense. And there actually is one tool in the portfolio capable of creating something like that: Motion. So, as an educated guess, I would say that's the one.

Does anyone have ASR 2.2.5 for mac os 9?

Similar Messages

Maybe you are looking for