Does anyone have problems steaming netflix with airport extreme??

Does anyone have a problem/solution for netflix streaming video over sirport extreme? My LG dvd player stopped streaming. I wonder if it is airport related.

No. No problems at all.
Can stream to computer, Apple TV, iPod Touch, iPad, no problems...
4th generation Airport Extreme....

Similar Messages

  • Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

    Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

    Correction: I was refunded for the previous movie freeze.

  • TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

    Not sure if this is a fix, but I tried sending myself a test email from only  the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
    ...maybe leaving the 'To' field blank on purpose forced Mail to show it.
    Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

  • Does anyone have problems with Mail (Display on the right) ?

    Hi to everybody !
    Does anyone have problems with Mail (Display on the right) ?
    What could be the cause of not displaying HTML correctly ?
    Could it be because I use SIMBL, that allows me
    to have Colourful SideBar ?
    Best regards
    Vialatte

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Does anyone have problems with data usage with att and Iphone5?

    Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?

    After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem. 
    We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month.  Yes, you read it right.  We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6.  Just imagine what that does to battery life!  The 5s would last about 5 hours and the 6 was dead in less than 14.
    The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
    Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected.  There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads.  I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

  • Does anyone have problems with iPhone 5 getting hot?

    Does anyone have problems with iPhone 5 getting hot? I just bought a new iPhone 5 & it's gotten hot twice. Once when I was on FaceTime for 30 min it got hot about 15 min into the call. & once when I was downloading some apps.

    http://support.apple.com/kb/HT2101?viewlocale=en_US
    It is normal for it to get warm when it's being used, especially if it is hot outside. It can even get uncomfortably warm. As long as it is not causing you physical harm (as in giving you burns) or displaying a temperature warning, then it's normal behavior. It's like taking your laptop outside and using it. Except the laptop will probably burn you.

  • Does anyone have problems with the ipad 4 staying connected to century link Internet?

    Does anyone have problems with the ipad 4's wi if Internet staying connected to century links Internet??? Please help!!

    LOTS of people reporting a range of similar issues.
    https://discussions.apple.com/thread/6648856
    https://discussions.apple.com/thread/6574287

  • Does anyone have problems with the led light ?

    Does anyone have problems with the led light ?

    LOTS of people reporting a range of similar issues.
    https://discussions.apple.com/thread/6648856
    https://discussions.apple.com/thread/6574287

  • Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

    Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

    Same problem for me: Since update to Lion my WLAN connection to my router (AVM fritz!box fon 7141) get's lost almost every time the computer is on idle for a couple of minutes. Deactivating and reactivating helps, but of course only until the problem occurs again.
    BTW: I'm running Mac OS X Lion (10.7.3) on a iMac 27" 3.2 GHz i3 (mid 2010 model).
    I'm really annoyed by this problem and looking forward for APPLES fix.

  • TS1702 Does anyone have problems on their iPad with the Pinball HD Collection freezing up on the screen regularly.as I am having it happen and it's annoying to cancel and reinstall.

    Does anyone have problems on their IPad 2 with an app called Pinball HD Collection freezing up on a regular basis and I then have to remove the app and then reinstall it. Most frustrating

    Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement.  So are you telling me that their information is false.  Also what should they have done.  This problem has existed since i bought it.?????  What should i do?????

  • Does anyone have problems using the  highlights, shadows and sharpness edits in iphoto? Since I uploaded Mountain Lion, those editing tabs do not work!

    Does anyone have problems using the highlights, shadows and sharpness controls in iphoto 11? Since I uploaded Mountain Lion on my
    mac mini, those editing features no longer work!!!!

    Sorry, I booted into 10.8 just to test this, but I only have iPhoto 08.

  • Does anyone have problems occasionally with their slide to unlock on iphone 4s with the ios7 update? And do you think there will be a bug fix? Bit worried

    Hi everyone,
    I've recently updated my iphone 4s with the ios7 update and there was a bug fix I also downloaded recently but I hadn't noticed anything wrong at the time. I know it's not happened that often today but does anyone have any problems with their 'slide to unlock' button and have to reload their iphone again? Do you think there'll be a bug fix for it? Just worried as it's not old and I have a feeling I shouldn't have bothered with the update at all.

    Why would you think it's a bug?  If it were a bug EVERYONE would be having the same issue.
    Basics from the user guide are restart, reset, restore from backup, restore as new.

  • Does anyone have problems viewing CMYK in Mail

    I send a lot of jpegs (Both RGB and CMYK) in my emails with the Mail program.
    When viewing the images in the Mail program, I have never had any problem until this morning. (Last night I downloaded and installed 10.4.4)
    Now cmyk files are reversed. (Negatives)
    Does anyone have any comments or suggestions with this?
    Anyone else have this problem.
    Thanks
    1mac G5   Mac OS X (10.4.4)  

    I have the exact same problem, Its only on Jpegs, all other formats are fine, have you found a solution? does it send the image as a neg or is it fine at the other end?

  • Does anyone have experience of the OWC Mercury Extreme SSD?

    Hi everyone
    I read Lloyd Chambers [interesting article|http://macperformanceguide.com/Reviews-SSD-OWC-Mercury_Extreme.html] about the Mercury Extreme. In particular he seems to have found very little performance degradation with heavy use.
    I guess this would make us Mac users very happy since TRIM is unsupported by OS X (or have I got that wrong?).
    Does anyone have real-world experience of this SSD yet?
    /p

    I could be wrong - but my understanding is that GC and TRIM are two separate things (and the need to do them with the new OWC drive as well)
    GC is a way to re-organize the data to avoid using blocks that were marked as part of the write amplification done on the drive. (i.e. to write 1mb, you had to actually write 1.3mb on the device - and how to re-organize the .3mb when the file is overwritten)
    TRIM actually clears the blocks that are no longer in use when a file is overwritten or deleted. The problem is that the device has no way to know what to clear - it needs to understand what the OS requires and what it does not require... and so it can't do it by itself as it needs to be aware of the filesystem. (NTSF/ZFS or in our case, HFS+). Instead the firmware just makes available the ability for the OS to go ahead and clear the bocks... that is TRIM support - the OS has to now delete the file (from the FS table etc) and then issues a TRIM on that file, allowing the device to clearing the blocks that are excessively used by the operation.
    In the case of the OWC - there is no much technical information out there to describe how it trims without knowing anything about the filesystem. Mind you - its not been out long enough to get tested by a large number of people. Some think that its using part of the cache to handle these cases - (if you know the ratio of amplification, then you could build a large cache to deal with the physical space)
    I think the secret for the OWC drive (and the OCZ Vertex 2 Pro) is the write amplification - which is less than the one from Intel. The less write amplification - the less need for GC and less blocks you need to clear by TRIM. A Harddrive has an amplification ratio of 1, OWC has (I think) 0.6 and Intel 1.1 - how do they achieve 0.6? On the fly compression and deduplication of data streams... (similar to what ZFS does at the filesystem level). I think part of the OWC 56Gb cache is used for the deduplication reference table as well... but when doing this - you have to be 2x carefull - if you loose part of the deduplication table for example, you loose not one file to corruption, but a huge chunk of your harddrive... as that pattern could be found in a lot of places... BTW - that is also how they achieve better longevity, they have to write less data that is produced... less writes, more life.
    Now - as of experience - none... I think it's a nice drive... It seems they have taken some thought on setting apart a large (18%) of their drive to avoid problem and try to suck all the performance possible. But its still the basic SSD drive - just with hardware compression to minimize the impact. OWC obviously does not make them - some one is OEMing them for them. The support is what I would wonder on this drive. But based on Lloyd's experience, it seems to be a good contender on your list.
    Just remember to backup often..

  • Is anyone successfully using Netgear WN3000RP with Airport Extreme?

    Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
    Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
    I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
    I'm using Airport Utility version 6.1.
    Can someone out there can let me know if they got this device working with their Airport Extreme?
    Also, what are my other options to extend my range?

    I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
    1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
    2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
    3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
    4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
    5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
    A Visual Representation would be
    ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
    In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
    An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
    Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Maybe you are looking for

  • How to create a $CUSTOM_TOP in 11i

    Hi All, Where can i get the document that gives an idea how to create a $CUSTOM_TOP in 11i in Linux Many thanks in advance... Best Regards,

  • Urgent: How to get the names of all menu items

    I have a .mmb menu module. There are many menus and submenus in it. Now I want to get the names of all menu items available in the module using sql or pl/sql. Actually I need to store these names in another table as it is. That is why I want get them

  • UWL Workitem item shows multiple Leave Request for Approval

    Dear All , I ahve modified standard workflow for leave WS12300111 . I have 2 levels of approval . The step which goes to approver is standard task TS12300097 which is calling DUMMY method of CL_PT_REQ_WF_ATTRIBS class . Now my problem is suppose 100

  • Pagination Incorrect When Making PDF from Word

    When making a pdf from Word using the "Fully Functional PDF" setting in Acrobat 8 Professional, I often get incorrect Acrobat pagination that changes to "1 of 1," 2 of 2," etc. instead of "1 of 2," 2 of 2."  Typically, I download both Acrobat and Win

  • File access problem while using BULK INSERT

    I'm creating a script to automatically convert a large mess of data.  Here's a test query I was using to bring a file into the database: INSERT [ImportTestTable] SELECT a.* FROM OPENROWSET( BULK 'D:\TestFile.csv', FORMATFILE = 'D:\TestStyle.fmt', FIR