Does anyone have three monitors working?

A friend of mine who enjoys the piece of mind of using Linux, but not the poking and prodding recently "inherited" a good monitor in addition to the two he already had.
He has two Nvidia cards. One came with the computer and has one out while the other card is much nicer and has dual outputs.
Has anyone gotten three monitors to work in Linux? I googled, but it seems that most of the things I read are from 2004-ish, and it wasn't so good back then.

AFAIK
one screen on the old card, one screen with 2 monitors on the new one and in the ServerLayout section you declare both screens ala
Section "ServerLayout"
Identifier "MEGAMONITORZ"
Screen "OldScreen"
Screen "NewScreen" LeftOf "OldScreen"
EndSection

Similar Messages

  • Does anyone have URL replacement working for catalog generated from wiki pages library

    Hi everyone,
    I have created a catalog from a wiki library which surfaces news/event/announcement articles to a publishing site (with make URLs relative to this site selected).  This works well after modifying the item page and specifying the content as HTML regarding
    the functioning of category/item pages.
    The only issue which remains is that hyperlinks between wiki pages are not replaced in the target site (they always point to the wiki pages within the authoring site collection rather than to their catalog counterparts in the publishing site).  It is
    my understanding that with publishing pages from a pages library these links are replaced to point to other items in the catalog connected site rather than the source.
    Is this just by design (only working for publishing pages rather than wiki pages), or does anyone have this replacement working?
    If this does not work it kind of defeats the purpose of the catalog here and I might as well give everyone access to the authoring library and just use a CSWP in the publishing site to redirect to the authoring wikis.  Not terribly nice from a layout,
    navigational or conceptual standpoint though.

    Just to add a bit more info to this... looking at the coreclient.log file you can plainly see that the page view took 50367ms to complete.... if anyone has any ideas, it would be greatly appreciated.
    Started GET "/wiki/pages/V6C291y8z/price_lists.html" for 192.168.0.100 at Fri Nov 04 13:48:49 -0500 2011
      Processing by PagesController#show as HTML
      Parameters: {"title"=>"Production_Intercom.html", "id"=>"V6C291y8z"}
    Rendered cc/_banner_link.html.erb (0.2ms)
    Rendered cc/_banner_link.html.erb (0.2ms)
    Rendered cc/_banner_link.html.erb (0.2ms)
    Rendered cc/_banner.html.erb (1.8ms)
    get_timezone_offset_from_request: -18000
    time: Wed Oct 26 12:52:17 -0500 2011
    time (client timezone): Wed Oct 26 12:52:17 -0500 2011
    Rendered cc/_entity_header.html.erb (2.5ms)
    Rendered cc/_wikieditor.html.erb (0.1ms)
    Rendered sidebars/_tags.html.erb (59.0ms)
    Rendered cc/_related_item.html.erb (0.0ms)
    Rendered sidebars/_related.html.erb (0.3ms)
    Rendered cc/_comment.html.erb (0.0ms)
    Rendered sidebars/_comments.html.erb (0.4ms)
    Rendered sidebars/_updates.html.erb (0.1ms)
    Rendered sidebars/_settings.html.erb (0.2ms)
    Rendered cc/_sidebar_section.html.erb (61.2ms)
    Rendered cc/_sidebar.html.erb (61.5ms)
    Rendered pages/show.html.erb within layouts/application (50366.0ms)
    Completed 200 OK in 261847ms (Views: 50367.1ms)

  • Does anyone have stateful plsql working in 8.1.7 (solaris) ?

    I've been trying to get stateful plsql working in 8.1.7 on a sun server (2.6). I've been through the OSE User's Guide and various other documents on Metalink regarding the setup of OSE. I appear to have OSE processing java servlets in a stateful manner but I can't seem to get PLSQL to do that. I have a trivial plsql package that just adds 1 to a package variable then prints it in a one line web page output. The first few http request cause the variable to increment then suddenly it goes back to 1 on another request from the same browser session. I see multiple database dedicated sessions for the user running the http session (scott/tiger). Whenever the counter goes back to one I see that another session has been created and apparently that is the "new" one that causes a "new" version of the package to be instantiated.
    I'm thinking i should see these sessions using MTS rather than dedicated.
    MY guessing that I have some problem with configuration of either the init file mts stuff, tnsnames.ora, listener.ora, or maybe the config of the simple testService stuff in JDNI.
    So, is there anyone who has this working that could send me a consistent set of config information for the above collection of files, etc??
    Thanks in advance.

    oops, sorry, just noticed that I posted this in the wrong forum.

  • Does anyone have personal hotspot working w/ iPhone 5, iOS 6.0.2, & T-Mobile (USA)?

    I currently can't get my personal hotspot feature working on my iPhone 5 with T-Mobile USA. I'm trying to figure out where my issue lies, whether it's bad hardware, a bug in iOS, or an issue with my T-Mobile account. I have the latest iOS update (6.0.2).
    It doesn't work no matter how I try to connect to it (wi-fi, bluetooth, USB).
    When I try via wi-fi, the wireless icon in the top right (in Mac OS X) does its little connecting animation, and then shows an exclamation point "!".
    When I try via Bluetooth, the Bluetooth PAN status in Network settings reads "Not Connected", even though I have it paired.
    When I try via USB, the iPhone USB status in Network settings reads "Not Connected", even though I have my iPhone plugged into my MacBook Pro.
    And yes, I have the hotspot option on my wireless plan with T-Mobile.

    I can happily say that whatever the issue was, the iOS 6.1 update has fixed it. So it must have been an iOS issue.

  • Does anyone have a Portal working with 50 or more Users concurrently ?

    I WOULD LIKE TO KNOW IF ANYBODY HAS A PRODUCTION PORTAL WITH 50 OR MORE USERS WORKING CONCURRENTLY.
    I AM INTERESTED TO KNOW HOW PORTAL PERFORMS WITH MANY USERS.
    ANY ADVICE OR SUGGESTIONS WILL BE VERY WELLCOME.
    TKS!

    Without knowing your hardware setup, your functional requirements, and the user base, and can't answer that question with 100% certainty. But, I can tell you that a multiple server configuration will definitely provide you with more performance and scalability (assuming proper configuration).
    As far as using Standard Edition vs Enterprise Edition, there will be no differences from a performance/scalability perspective. With Enterprise edition you get some tools you don't get with Standard Edition such as WebCache, Forms, Reports, Discoverer, 8i Cache (database cache), and iFS. I'm not certain if you get OID with both editions, but I think you might. If you dont have OID you wont be able to use the LDAP authentication features of Portal (unless you already have your own LDAP directory service set up).
    The product lists are from my memory (not always dependable), so you should verify those through your sales representative before making any decisions.
    Hope this helps...
    null

  • SCOM 2012 SNMP Trap - Does anyone have it working?

    I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012?  Probes work fine.
    We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices.  We currently have a case open with Microsoft, but they dont have any answers as of yet.
    Here are the cliff notes version of what we have done so far.
    Discovery - OK
    The nodes discover without issue.  I made sure they were set to SNMP only.  I did this to verify we were talking SNMP and not just ICMP.
    Open Ports/Firewall Issues
    No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from.  Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
    process.  We have tried having SNMP installed, but disabled, installed and running, and uninstalled.  Currently we have the SNMP service installed and running.  The SNMP Trap Service is NOT installed.
    Data Validation
    Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server.  I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator.  I was able
    to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
    What has been done on SCOM side
    The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor.  We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
    anything hitting that Collection Rule.  The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices.  No results.
    We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
    So has anyone succesfully received a SNMP TRAP into SCOM 2012?

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks,
    Yog Li
    TechNet Community Support
    How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
    People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

    I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

    It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

  • I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

    I have just updated to Yosemite, but now I can't get the custom short-keys to work.
    In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
    Does anyone have the problem? All the other shortcuts work!

    Hi Thomas,
    I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
    Thanks for identifying this issue!
    In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
    Cheers,
    Alex

  • Ive tried every possible way to get my ready preorder of an album to download and nothing is working... ive checked recent purchases.. going to my computer.. and still nothing.. does anyone have an answer as to how i can fix this? i just want my music!!

    i have gotten my email that me preorder of an album is ready.. clicked on the link and got brought right to the home page of the itunes store.. went on my computer and checked all the recent purchases but i still cannot find my "purchased" music anywhere.. does anyone have an answer for me? im really aggravated.. a nice answer of how to get my already paid for album would be GREATLY appreciated..

    Hello nicolefromlisbon
    If the download link is not working to get your Pre-order, then report the issue to the iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I have a mac book pro.  Yesterday the mail app failed to open.  I have tried to open it fomr the dock and the application folder but nothing happens.  Does anyone have any suggestions to get it to work?

    I have a mac book pro.  Yesterday the mail app failed to open.  I have tried to open it from the dock and the application folder but nothing happens.  Does anyone have any suggestions to get it to work?

    You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
    What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
    You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years.

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.

    I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (123381)

  • I've been working on our church website and suddenly, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

    I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]

  • Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive.  Does anyone have a suggestion?  Thanks!

    Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive.  Does anyone have a suggestion?  Thanks!

    MacDrive to provide better HFS support.
    And to acces and write.

Maybe you are looking for