Does anyone have /usr and / on separate partitions?
I wonder if there is any common issue when having /usr and / on separate partitions?
Upgraded to Solaris 10 (03/05) recently. It was OK until I applied the lasted recommended patch cluster (Generic_118822-26).
The problem is that:
I can not bring "svc:/system/filesystem/usr:default " online.
"svcs -x" shows
svc:/system/filesystem/usr:default (read/write root file systems mounts)
State: offline since Wed 11 Jan 2006 11:10:53 AM EST
Reason: Start method is running.
See: http://sun.com/msg/SMF-8000-C4
See: /etc/svc/volatile/system-filesystem-usr:default.log
Impact: 42 dependent services are not running. (Use -v for list.)
Is there any way to save this system except reinstalling the OS?
Thanks in advance.
I always create seperate / and /usr (/var and /opt for that matter) filesystems and have never experienced the problem you are describing. This has worked reliably for me from the Solaris 2.5.1 release up to and including Solaris 10 10/06 for SPARC and x86/64.
If at all possible, I try to use a boot disk large enough to hold each of these filesystems, plus a token /zones and /export filesystem on Solaris 10. This strategy gives me quite a bit of flexibility in managing filesystems and avoiding situations where I find myself running out of room when upgrading or patching.
Similar Messages
-
Does anyone have Windows and cache on an SSD?
A variation/simplification of my previous post.
Has anyone managed to use an SSD with both an SRT cache partition and a Windows operating system partition on a Z68 board?
If so, please tell me which board/ BIOS version/ RAID ROM versions (CTRL-I)/ IRST driver version.
I cannot get this to work with my Z68aGD80(G3) with current or previous BIOS.
Tech support were no use.
thanks
BlonksterQuote from: l3g4cy99 on 11-October-11, 05:14:56
Based on this information and the way I interpret it, sounds like you can get say a 120gb SSD, Partition it to have 2 60gb partitions, using one for Windows and the other for SRT Cache sense it only used up to 64gb for the SRT.
You're interpreting it wrongly.... read it in stages
Quote
"With the Z68 SATA controllers set to RAID (SRT won't work in AHCI or IDE modes) just install Windows 7 on your hard drive like you normally would."
ie: HDD fitted, Windows 7 installed
Quote
"With Intel's RST 10.5 drivers and a spare SSD installed (from any manufacturer) you can choose to use up to 64GB of the SSD as a cache for all accesses to the hard drive."
Then you add the SSD and the RST drivers
Quote
"Any space above 64GB is left untouched for you to use as a separate drive letter."
Any space left on the SSD is yours to do as you wish with. -
Does anyone have Lion and can connect to Windows servers?
Is there anyone out there who can see the Windows server folders? Or am I (and a handful of others) the only ones who are having this issue? Is ANYBODY able to connect to their Windows server with Lion? (they dropped SMB support in Lion...this is why I'm asking).
What servers are you connecting to? Here at work they use:
windows server 2003
standard edition
32bit
No luck with me. I can connect to wifi internet, but can't access any of the shared folders anymore (I could with SL) -
In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?
Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.
-
I've preordered my iPhone 5 from apple and tried to get a sim from o2, they said I couldn't preorder. Does anyone have any information about this?
Ethmoid,
Generally buying on contract or buying outright from apple with a separate sim from a provider is little difference in cost.
Work out the total cost over 24 months for the phone+monthly tarrif and you will see.
Also the contracts where the phone is cheapest but have a higher monthly cost tend to be the ones that cost you move over a 24 month period.
For example;
Using O2 UK as an example (other carriers are very similar). For the iPhone 5 64GB;
From Apple £699, plus O2 On & On £20 per month is £1179
From O2, Phone £249, per month, £41. Total over 24 months is £1,233
From O2, Phone £169, per month, £46. Total over 24 months is £1,273
From O2, Phone £69.99, per month, £63. Total over 24 months is £1,581 <Cheapest phone, most expensive
*These all use the same tarrif of unlimited talk,texts and 1GB data. The only difference is how much you want to pay upfront for the phone*
Also worth noting is buying the phone from apple and the O2 tarrif is only a 12 month tarrif so you're not locked in for 24 months.
As you can see, the cheaper the phone, the more the overall amount you pay. -
Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?
Welcome to the Apple community.
Does anyone have suggestions?
Trash the spyware (Chrome) and use Safari. -
What's happened to the calendar in IOS 7.0? I would like to be able to see the whole day at a glance not just a few hours. Any suggestions?
I know what it looks like and what it does. I need to be able to see the whole day! A few hours is not helpful for knowing whats ahead. I don't want to scroll I just want to be able to look at a glance. Does anyone have any helpful suggestions.
-
Hi
I have purchased an audio book from iTunes with my iMac.
Now I wanted to listen to it on my iPhone so I proceeded to transfer the purchase and looked for the book in the purchased section of the store in the iTunes on my iPhone but it did not show up.
Does anyone know why and how I can transfer the audio book purchased on my iPhone so I can listen while away from the desk?
Thank you,
SanyaCan you find the audio book by using the Search feature on the iPod?
Do you have the right boxes checked to sync the audio book to the iPod?
iTunes: Syncing media content to iOS devices and iPod
Note you have to check the boxes in Books pane for the iPod in iTunes to sync books in general and another box to sync Audio Books. -
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
I have just updated to Yosemite, but now I can't get the custom short-keys to work.
In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
Does anyone have the problem? All the other shortcuts work!Hi Thomas,
I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
Thanks for identifying this issue!
In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
Cheers,
Alex -
I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071 -
I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?
Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail -
Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?
It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.
-
Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.
Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. -
i have gotten my email that me preorder of an album is ready.. clicked on the link and got brought right to the home page of the itunes store.. went on my computer and checked all the recent purchases but i still cannot find my "purchased" music anywhere.. does anyone have an answer for me? im really aggravated.. a nice answer of how to get my already paid for album would be GREATLY appreciated..
Hello nicolefromlisbon
If the download link is not working to get your Pre-order, then report the issue to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
Creating a calendar of events based upon selections made in other tables
I have a Sheet that I've started working on the includes a variety of pop-up menus that reference look up tables on another sheet that contain names and prices of products. In conjunction with the drop down menus are a series of check boxes for the m
-
VRF-Lite on one 6509; How to route traffic from global to VRF.
To anyone that can lead me in the right direction: I have a 6509 switch with IOS " s3223-adventerprise_wan-mz.122-33.SXJ2.bin" on it. I am running VRF-lite on it and would like to route some subnets from the global route table to the VRF route table
-
How to check whether the report is being called or not
Iam using srw.run_report.for calling another report. I have registered both the report in oracle apps11.0.3. When i run the master report in oracle apps I want to see whether the second report is called or not. How to check this. Thanks.
-
Urgent: want function module to translate text into russian language
Hello All, My requirement is that, field is fetched from std. table. This fiels of data type string, i.e., it contains text. I want to translate this text into russian language before displaying this in output. For otr text, i used se63 to translate.
-
Can I create a macro to automaticaly double the row height for parents?Thanks Joe