Does anyone know a script that copies transformations of a frame?

I'd like a script where all the frames selected on a spread can copy an original frame's transformations. So, for example:
I have 3-5 photo frames at different sizes and spaced unequally. I set one frame to be a perfect square with a photo filled proportionally. Set the stroke to 1 at registration black. Now, I'd like the other frames to be exactly the same (but holding different photos) and spaced at 1 cm vertically and horizontally from each other. Is this possible? If so, how do I go about either creating the script or better still, buying it?
"Transform sequence again individually" command just doesn't work for me and is too time consuming.
Best and thanks for the help.

I'm not sure that I have a clear picture yet of what you are trying to do, but does the ImageCatalog.jsx script that comes with InDesign do something similar to what you need?

Similar Messages

My battery life between charges on my ipad 1 has plummeted to about 2 hours. The guy at the genius bar suggested it might be an app (unfortunately I didn't have the device with me). Does anyone know of apps that cause heavy drains on power? Thanks!

The battery life between charges on my iPad has plummeted to about 2 hours. The guy at the genius bar said the charge should last about 10 hours and suggested it might be an app (unfortunately I didn't have the device with me and the nearest Apple Store to me is 2 hours away). Does anyone know of apps that cause heavy drains on power? It also does not charge when it is plugged into my MacBook while I am using the iPad but it does when I am not using the iPad. I mostly use the iPad to read e-mails, play Team Lava games, read books through iBooks or Kobo and the ABC Player. Any thoughts would be greatly appreciated! Thanks!

Restore is about the only option left, short reinstalling the whole thing as new.
Before you restore, go to I tunes and turn off automatic sync. Then plug the machine in. Upload any photos that you have taken with the pad into I photos, or where ever you keep your pictures. Then, in I tunes, transfer any purchases.
If any apps or purchased music get lost in the process, you can download them again for free.
You do not want to make a backup of what you have on the pad now. If you do, when you restore, you will simply recreate the same problem.
What you want to do is restore from a prior backup. Do that.
Then run the system status app and see what the CPU numbers look like. If they are ok, then you can start to re add apps until the problem shows up.
If this does not do it, then the last step is to set the pad up as new. Check the numbers, then add the apps and settings back one by one. While it is likely to be an app, it may be a setting somewhere.

Does anyone know what to do about transforming my music from my ipod to my mac, it's one of the first ones made

does anyone know what to do about transforming my music from my ipod to my mac, it's one of the first ones made

Select your iPod Model from here > http://www.apple.com/support/ipod/
And have a look at the How To and Troubleshooting Sections

I am try to print a sheet of avery labels all with the same info on them. Does anyone know an application that I can do it in?

I am trying to print a sheet of avery labels all with the same info on them. Does anyone know an application that I can do it in?

Welcome to the Apple Discussion Forums! This is your first question, right?
This took a long time for me when I was printing my Avery labels. Pages doesn't seem capable of doing it, but you can do it on MS Word 2011. Try searching Google for more alternatives.

Does anyone know for sure that one can sync a Palm Z22 to Outlook on Mac?

I am going to be getting a Mac in my office this summer, and I need a new PDA. The low-end Palm Z22 will be fine for my needs, but I must be able to sync with Outlook as that's what I must use for work. Does anyone know if I would be able to do this? If I have to have additional software and what it is?
Thanks!

Hi there,
I don't know for sure, if you have not seen this, you may want to look at it. All sorts of great conduits for palm and various mail apps. The developer is a nice fellow and helped me with a conduit for my Visor and mail app.
http://www.queuesoft.jp/download-e.html
It might help,
Good luck
Peace,
NoteFarm

Does anyone know a number that you can call about trouble I am having with itunes U

Does anyone know I number I can call about itunes U?

Hi Sharpg...
I've contacted support for working with Course Manager or Site Manager in two ways:
email: [email protected]
phone: 800-800-2775
You can always post your issue here and maybe someone can help.
Good luck,
Ken

Does anyone know of software that converts LaTex and rtf files to doc?

Hi All:
I edit documents for PhD candidates in economics. As these documents generally contain a lot of symbols, the authors use LaTex, which they sometimes convert to rtf. I prefer to edit using word and track changes. In fact, that's the only way I know how to do this. So I am wondering if anyone knows of software that converts LaTex and/or rtf files to doc files.
Thanks so much,
Lunenburger

Bean can do this:
http://www.bean-osx.com/Bean.html
and I am sure that Word accepts rtf documents as well.
There is a version of LaTex for Macs:
http://evolve.lse.ac.uk/software/EquationEditor/
(scroll down).

Does anyone have a script that embeds and downsizes the images placed in a file?

WEll?

Wouldn't this vary significantly from person to person, company to company? For example, we have a ton of starter scripts from previous projects and have an automate prompt generator, so a net new script would only take a matter of days, unless it's something very different than we've seen before.
Additionally, there are times that you want, newer people, to build something from scratch so they can have a better understanding of what they are doing and how UCCX scripting works. I guess I'm saying that what you're looking probably doesn't exist and if it does it will not apply to you very well.
david

Does anyone know the song that is currently on Apple's homepage for the memory of Steve Jobs?

I have Apple set to my homepage. I am looking to find out what instrumental that is in the background. Does anyone have any idea? It starts with a violin. Thanks!!

USMC -- I found this for you. I was pretty sure it was YoYo Ma.
This is from the NYTimes. http://bits.blogs.nytimes.com/2012/10/05/with-steve-jobs-tribute-a-home-page-ref lects-its-founder-again/
On most days, Apple.com is like any other corporate home page — a billboard, a news hub for corporate goings-on and a launching pad for an online store where people can buy stuff. Every once in a while, though, it turns into something unlike any other big company’s home page.
Friday was one such day, when Apple’s home page featured a video tribute to Steven P. Jobs, the company’s co-founder and former chief executive who died a year ago to the day. The 105-second video consisted of still black-and-white images of Mr. Jobs with audio of him announcing Apple products like the iPhone and describing Apple’s corporate philosophy. The music on the soundtrack is Bach’s Prelude No. 1 in G Major for Cello, played by Yo-Yo Ma, who was a friend of Mr. Jobs.
You can find it on iTunes, under Suite for Solo Cello, No. 1.
It's at the top of the YYM, Bach list.

HT204382 divx codec is no longer supported for quick time player!does anyone know any components that can support?

my operating system is mountain lion on a mac book pro mid 2010,Im after a codec/component for quick time player!ive tried the divx download & it is no longer supported for mac!can anyone pls direct me in the right direction?thank you.

Hmm, yes. Didn't notice that. Looks like it's still in development. I haven't time right now to check further, but will do later on and report back.
Camtasia 2 for Mac is the video editor I use, but it's payware I'm afraid. You can download a free, full 30-day trial to check it out though, from here, if you want:
http://www.techsmith.com/camtasiamac1.html?gclid=CL3IuM6_868CFU8b6wodalvkVA

Does anyone know the logic that CUMA uses?

We are trying to get a CUma setup to work and the iphone just hangs and verifying, and I am seeing packets traversing the ASA, I know the certificates are good, but The phones are just not working.
I used this document,
http://www.cisco.com/en/US/docs/voice_ip_comm/cuma/7_1/XML/new_installs/b_cuma71_new_install_config.html
and I have a NAT issue resolved since EZVPN breaks when following the doc exact with the nat rules.
Cuma needs to see the ASA Inside IP, correct? Thats what I gather from the Doc.
OK say the Certificates are good, Nat is good, TLS is working MMP is OK etc. What are the steps taken when a phone connects to Cuma?
Phone touches ASA, ASA proxies the connection to the cuma server using its inside IP as the source, instead of the real IP of the phone, server responds to the IP, ASA translates it back to the real IP and sends it to the phone. So far thats what is happening, whats the next step Cuma takes to get the phone to register?
Cisco TAC is going around in circles with us, one says its certificates and points to ASA, ASA says its the server and points back.
Cisco Tac broke the signed certificates in the process of trying to "fix" them when they deleted the key-pairs. I reinstalled all certificates by the book and they are working.

USMC -- I found this for you. I was pretty sure it was YoYo Ma.
This is from the NYTimes. http://bits.blogs.nytimes.com/2012/10/05/with-steve-jobs-tribute-a-home-page-ref lects-its-founder-again/
On most days, Apple.com is like any other corporate home page — a billboard, a news hub for corporate goings-on and a launching pad for an online store where people can buy stuff. Every once in a while, though, it turns into something unlike any other big company’s home page.
Friday was one such day, when Apple’s home page featured a video tribute to Steven P. Jobs, the company’s co-founder and former chief executive who died a year ago to the day. The 105-second video consisted of still black-and-white images of Mr. Jobs with audio of him announcing Apple products like the iPhone and describing Apple’s corporate philosophy. The music on the soundtrack is Bach’s Prelude No. 1 in G Major for Cello, played by Yo-Yo Ma, who was a friend of Mr. Jobs.
You can find it on iTunes, under Suite for Solo Cello, No. 1.
It's at the top of the YYM, Bach list.

Does anyone know a tcode that shows what users have accessed a transaction?

Hi everyone,
Do any of you know if there is a transaction I could run that would allow me to enter any transaction code to show what users had accessed it on a particular day?
Thanks for your help!
Ciara

>
Ciara Gill wrote:
> Hi Subhash,
>
> Thanks for your response! I was hoping not to have to use teh audit log as it means tracing every user and that woudl use up a lot of memory.
>
> Thanks
>
> Ciara
ST03/ST03N - Recent user
SM04/AL08- Current user
but there is no any other way through you can find out each and every user history except SM20 as per my understanding.
Regards,
Subhash

Does anyone know a site that makes custom macbook pro decals if I provide the image?

I'm not sure where to post this, so I thought I would just post it here. Sorry if this is the wrong place, I'm new. But I want a decal for my macbook pro 13'' but no one makes it, so I thought I'd see if someone can custom make it for me. I'll post a link to the image I want. http://i.imgur.com/oo6li.jpg

You can make it yourself on your home printer.
Print it on a decal sheet in high resolution, then using a sheet of lamination on top of that to protect the image.
Now you have a high resolution decal that wont let the image scrape off or run if wet.
custom stickers have to be ordered by the 100s or 1000s, you dont want that

Does anyone know a widget that shows the power mangement, sms settings?

is there a widget that can show me easily the list of things that comes up when you type pmset -g in to the terrminal to see power management, the sms sensitivity, and the rest of what it displays? ive searched but its tough to find one.

Evidence is simply wrong, and new media have to say something, don't they? There are almost 10,000 posts about battery problems, and a few dozen about WiFi. Which is a real problem? WiFi problems have occurred sporadically for 4 years; there's nothing special about 5.0.1. If you focus on the version you will never solve the problem, and waiting for the next version won't solve it either. If you want it to work you will have to follow some basic troubleshooting. Here's what I'm talking about:
WIFI not work after upgrade to IOS 5.0
iPhone Wi-Fi not working after iOS 5 update
Re: iOS 5.0 WiFi Problem
Re: No Wifi after 4.0.1
Re: WiFi reception extremely bad
Re: OS 4.0 WiFi Problem
Re: No wifi on 3G 4.0.1
Re: Upgrade to ios 4.0.1 => still NO WI-FI
WIFI problem after IOS 4.0.1
Re: 3.1 WIFI Issues
Re: Unable to use wifi since update to 4.3.1
WIFi issues since 3.1
Re: Wi-fi issues with new 3.1.3 update
Most WiFi problems fall into 2 buckets:
Actual WiFi chip failure; more common than you think
Settings curruption as a result of the upgrade process, having nothing to do with the specific versions involved
The 2nd can usually be fixed by Reset Network Settings or Reset All Settings. Frequently also by "forgetting" the network, rebooting, then reconnecting.

Does anyone know what is causing this error please?

I recently ran sfc /scannow. It completed without giving me any notifications other than a number of:
"Files that are required for Windows to run properly must be copied to the DLL cache."
I was prompted to insert my XP SP3 installation CD and click on 'retry'.
The scan lasted for around 40 minutes then closed.......at no stage was I advised that it had been unsuccessful.
When I restarted my computer directly afterwards, half way through booting a 'please wait' appeared, as if something was taking place.
I thought all had gone well until I looked in Event Viewer later. There are approximately 90 Windows File Protection entries there mostly with the following information:
The system file ........ could not be copied into the DLL cache. The specific error code is 0x800b0100 [No signature was present in the subject]. This file is necessary to maintain system stability.
Does anyone know what causes that error and what I need to do to resolve it please?

Thank you very much for helping.
I have already tried to run the Microsoft Fix it from there for XP SP3, the os I have>>>>>>>"This troubleshooter does not apply to your system. We're sorry, but this troubleshooter is not compatible with your current system's configuration."
That was the only Microsoft information I could find on the specific error code I received: 0x800b0100......although the article applies to Microsoft Updates, I thought it might cover this too.
I have now run SFC three times, but errors still showed in Event Viewer.
I regularly run Chkdsk, last few times no errors.
I am actually having my computer checked for malware right now by specialist malware removers......all the malware scans I regularly run have given me the all clear for some time (McAfee Stinger, Hitman Pro, Malwarebytes - MBAM, TDSSKiller) but there has
been malware on my computer in the past, which was removed (not serious I was told).
In two of the scans the techs asked me to carry out there are
hundreds of dll cache entries under
Files/Folders - Created Within 30 Days on the date I run SFC.
I am waiting for this to be confirmed, but it looks to me as if SFC was actually successful to a large extent and the entries in Event Viewer are some failures (not all as I previously thought)?
I also have a serious problem in relation to Microsoft Updates (please see my other question).

Does anyone know a script that copies transformations of a frame?

Similar Messages

Maybe you are looking for