Does anyone know a way to programatically loop through the items in the document library
A lot of the funcations like deleteSymbol and updateSymbol depend on which items are "selected" in the library panel.
Is there a way to programatically access these selections?
or
Loop through the library?
or
Set selections?
Yup, I've asked for an API to access the selection in those panels for years, to no avail.
Note that you can loop through layers, frames and pages, but you can't tell what the user has selected in the actual panel UI. Also, you can't find out which symbols are currently used in the document. Nor can you programmatically insert a rich symbol into the document and have it maintain its "richness".
Similar Messages
-
Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?
Read this
iOS: Unable to update or restore -
Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks
Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable. -
When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?
I have a similar problem with at least two songs that I know of, one is an iTunes download (encrypted) the other was imported from a CD using iTunes (no encryption). Both songs play 2-3 seconds then immediately go to the next song. The "weird" thing -- I plugged my iPod into my new MacBook which has no songs other than what are on my iPod (i.e., not playing the song from another source) and both songs play fine. Unplug the iPod from the computer, plug in headphones and the songs skip again.
I've gone through the 5 R's as well, with no luck. -
Does anyone know a way to modify "Default Settings" printer preset?
I use enough different presets that I find that the "Last Used" preset for printing if often what not what I really want.
(Background: I save a number of different profiles for different types of print jobs, so that I can select "Color Production" as a preset, for example, and get a number of printer settings configured as once, like Color Settings, Quality, Color, and duplexing. These are set and selected using the "Presets" picker in the Print dialog box. One can use the picker to save and view settings as well.)
Am I correct in that there doesn't seem to be a way to change the "Default Settings" preset? The "Show Presets" pick in Presets doesn't offer the ability to change the presets, and the "Default Settings" preset can't be deleted here, unlike the user set presets; it also isn't possible to save a preset as "Default Settings".
Ideally, changing the default would let me check the box to always use the default (as default), but this way I would have my own defaults. Just wondering whether I'm missing something obvious - I've tried the modifier keys trick clicking on things, and also the CUPS subsystem at localhost:631.jptrovato wrote:
Does anyone know a way to make a Dell 3110cn Color Laser Printer fully compatible with a Mac operating system?
Go to the dell support site and download and install the most current drivers for your pring and operating system. -
Does anyone know a way to reference values in cells from separate sheets?
Does anyone know a way to reference values in cells from separate sheets?
I had not used the iCould version. I just fired it up. So far I don't know how to click to make a reference to another sheet but the syntax for sheet and table names when typing them in is a little different. If there is a space character in the name, you have to put single quotes around the name.
='Sheet 1'::'Table 1'::B1 -
Does anyone know a way to replicate the SAPSID adm user ?
We are trying to consult to one of our clients that using SAP/r3 with Oracle 10.2 DB.
The client has a team of 4 DBAs, and the entire team members are using the username <SAPSID>adm in order to login to the DB and conduct changes and other operations.
We believe this is the wrong way to handle the login authorizations, and we think that each DBA has to have his own user name in order to enable audit trail. The client's IT team manager claims they don't know how to create personal user names with the authorization level of the <SAPSID>adm, and they must use this user name for their needs and operations.
Does anyone know a way to replicate the <SAPSID>adm user authorizations to some other DB admin user name so they will enable audit trail for each team member?Hello,
You can create any number of users have authorizations similar to sidadm user but I don't think it will serve the purpose because of the way the things are designed to be maintained in SAP.
However, you can utilize an alternative. Create individual OS IDs for each person who has to log on to OS. Assign 'sudo' access to these individual IDs to logon to 'sidadm' and 'orasid'.
Thanks -
Does anyone know when Apple is going to fix the bug with transfering voice memos from the IPhone 4 to itunes on a computer. I waisted a lot of time trying to figure out why it was not working. Then I read some comments about other people having the same issues.
cheers!Anyone that did know would be bound by non-dosclosure agreement not to say.
Unless Apple announces, which they very rarely do, there is no way to know what Apple will do in the future or when they will do it.
Sorry. -
does anyone know how I can create a text field in a pdf document that will multiply a total in another box? I’m making an interactive pdf for an order form (attached), and I need to find a way for the “total quantity” number to multiply by 9 and total in the “Amount Due” box.
Hey Gary,
Have a look at this post: Re: horizontal scrolling similar to excel
Andy's reply will show you how to make a table scroll horizontally, but it will be tough to accomplish it in some sort of easily replicable way. I am working on a JQuery extension that will help accomplish this, but I have had my time invested in another project at the moment.
Good Luck,
Tyson -
Hey ! At the moment I am creating a eBook, which should contain links to iTunes.
Does anyone know, if it is necessary to join the affiliate program for this ?? Cause I don`t want to ;-)Hi Bruce,
I'm getting closer. I actually tried a variety of expressions, such as "== null" and yours, but the problem persists.
I am settling on the following, but there is a hangup related to the field that is being looked at for the condition that I will explain in a minute. Here's the script:
if
(ViolationsTable.ViolCorrSection.ViolationsText.DebitVal.isNull || ViolationsTable.ViolCorrSection.ViolationsText.DebitVal.rawValue.length == 0)
ViolationsTable.ViolCorrSection.instanceManager.removeInstance(parent.parent.index);
else
app.alert ("Warning Statement);
ViolationsTable.ViolCorrSection.instanceManager.removeInstance(parent.parent.index);
What happens is that, no matter which row in my table I'm in when I click the remove instance button, the script is always looking to the DebitVal field in the first row of the table. So, if the first row is empty, the message box won't appear for the removal of any row in my table. If the first row has a value in DebitVal, then the deletion of any row in the table will trigger the message box.
I need a way to specify the script to look at the DebitVal field in the row that I am clicking in, without messing up the remove instance command.
Ideas?
Dave -
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone. -
Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered. -
My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?
If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash. -
Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
Please help.thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue. -
I recieved my iPhone 5 3 weeks ago and the battery life completely *****! After doing a few things and maybe using it for about 30 minutes the phone start overheating like crazy then the battery starts dropping very fast. Does anyone know if it's a problem with the iOS or with my phone? And is anyone else expierenceing these problems?
It sounds like you have an app that is incorrectly continuously using data and power... from normal use the phone should NOT be getting that warm... only constant video playing via data like Netflix for example would result in that...
I'd say that you should remove all apps in the recent app tray... tunr phone off... then once you power back on...
Hold BOTH home and sleep wake buttons together until you see a white apple symbol... then release both buttons...
This will ensure you have no apps running...
I've experienced a hang up with mail while out and about that has resulted in this on my iPhone as well... Once I performed these steps it was fixed... it seemed like it got stuck and that's what caused the warm phone and battery drain...
I notived that when it gets stuck (mail app that is) I will see the text connecting at the bottom and it never changes to "updated" like it should... this is my trigger that it's gotten stuck.
Have not really figured out what causes mail app to get stuck yet...
Maybe you are looking for
-
Itunes store will not load in 10.5.3.3
I could access the iTunes store with version 10.4.x.x but after upgrading to 10.5.3.3, the store will not load. The progress bar at the stop center goes half way and then after 30 seconds stops with no error message. The screen simply says "iTunes
-
Accessing JDBCSystemResources with WLST
Hi All, I am getting an strange error while reading JDBCSystemResources with WLST. I am trying to read 'JDBCSystemResources/MedRecGlobalDataSource/JDBCResource/MedRecGlobalDataSource/JDBCDriverParams/MedRecGlobalDataS ource/DriverName ( and all prope
-
Less than or eual to Date issue in dynamic where clause
Dear All, I have a requirement to search the leave balance information, here date as a parameter. When ever we pass the date as a parameter it should be display all the leave balance information till the parameter date. Steps I have followed to achie
-
PC Companion and Outlook 2010 calendar sync error
Hi there I am using PC Companion 2.10.174 and Outlook 2010 (14.0.6129.5000) and a Xparia T with Android 4.1.2 (Build 9.1.A.1.140) Contact Sync runs without problems. But when I try to sync my Outlook Calendar with the phone, an error occurs The logf
-
trying to change home page, the instructions say to hit yes. where is the yes