Does anyone know a way to use the iPad with the smart board and have the smart board be interactive?

Have amny teachers who would like to use ipad apps on the smart board. However as there is no USB port there is no way to connect the ipad to the smart board and have it be interactive.

You need some EQ, whether its on a mixer in between the mic and the mac or in software is up to you. Start at the Blue Microphone forums.
And the closer you get to the mic the more enhancement of the lower tones will happen, leave lipstick on it for Marlene Dietrich

Similar Messages

  • Does anyone know if I can use 2 ipads under the same id

    Does anyone know if I can use 2 ipads under the same id

    Yes, you can. In fact, it's recommended if you own multiple devices that you use the same ID to manage them. For the App Store, you can download an app you buy on multiple devices without having to re-purchase. With iCloud, you can sync your information (contacts, calendars, etc) across multiple devices. So it's very useful to sign in with the same ID.
    Matt

  • Does anyone know how to download Siri onto iPhone 4 as I don't have the iPhone 4s I do have ios5 on my phone

    Does anyone know how to download Siri onto iPhone 4 I have right op system and don't have iPhone 4s

    The Huntress,
    I am aware of the Terms of Use of this forum.
    On the contrary I suggested NOT to go on that route.
    Didn't provide support didn't discuss, just mentioned.
    Also mentioned the risk of losing warranty, performance and battery life.
    Our friend Vince will probably find a solution like the one I mentioned and that's the reason I mentioned that there is availabl, BUT NOT recommended.
    I am not an native english speaker, but I think it is quite obvious that the post is against jailbreaking.
    Cheers.

  • Does anyone know why my iphone 4s wont sync with my itunes

    Does anyone know why my iphone 4s wont sync with my itunes

    What year and model?
    I own a 2007 GL with an iPod adapter. My iPhone couldn't charge or play music through the adapter until the 2.1 update. After a complete new restore of my iPhone, the iPhone's music will play, however, as I expected it will not charge. Regarding BT through the MHI Puck, the iPhone will sync the Contacts & Call Lists, I now have full control through the steering wheel controls, and sound is much better than the 2.0.x FW. Through the 2.1 update, I effectively had reset all network and BT connections; be sure to reset all of your settings on the iPhone and re-pair it again, if you use a BT MHI Puck. And, be sure to wait a bit - the first pairing took about 3 minutes, the subsequent pairings are complete in about 20 seconds.
    Not available on this side of the pond (yet, AFAIK), MBZ has an iPhone 3G cradle adaptor for a lot of the newer MBZ vehicles (sadly, not the GL). Mercedes' part number is 204 820 23 51. The cradle plugs into the UHI connector (option 386). More at:
    http://www.emercedesbenz.com/Jun08/19001204_Mercedes_Benz_Hearts_The_iPod_New_Cradle_Allows_Further_Integration_Into_ The_VehicleArchitecture.html
    I'm waiting to see if someone comes up with an adapter to the existing system's iPod connector.

  • Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections.  Does anyone know their way around this obstacle?  Thanks!

    Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections such as options.  Does anyone know their way around this obstacle?  Am I doing anything wrong?  Thanks

    Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
    But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
    Thanks for your helpfulness, anyway.
    And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

  • HT1711 When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?

    When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?

    I have a similar problem with at least two songs that I know of, one is an iTunes download (encrypted) the other was imported from a CD using iTunes (no encryption). Both songs play 2-3 seconds then immediately go to the next song. The "weird" thing -- I plugged my iPod into my new MacBook which has no songs other than what are on my iPod (i.e., not playing the song from another source) and both songs play fine. Unplug the iPod from the computer, plug in headphones and the songs skip again.
    I've gone through the 5 R's as well, with no luck.

  • Does anyone know a way to replicate the SAPSID adm user ?

    We are trying to consult to one of our clients that using SAP/r3 with Oracle 10.2 DB.
    The client has a team of 4 DBAs, and the entire team members are using the username <SAPSID>adm in order to login to the DB and conduct changes and other operations.
    We believe this is the wrong way to handle the login authorizations, and we think that each DBA has to have his own user name in order to enable audit trail. The client's IT team manager claims they don't know how to create personal user names with the authorization level of the <SAPSID>adm, and they must use this user name for their needs and operations.
    Does anyone know a way to replicate the <SAPSID>adm user authorizations to some other DB admin user name so they will enable audit trail for each team member?

    Hello,
    You can create any number of users have authorizations similar to sidadm user but I don't think it will serve the purpose because of the way the things are designed to be maintained in SAP.
    However, you can utilize an alternative. Create individual OS IDs for each person who has to log on to OS. Assign 'sudo' access to these individual IDs to logon to 'sidadm' and 'orasid'.
    Thanks

  • Hi. I am building a website with the White template. Does anyone know which typeface was used by Apple on the heading index? (I would like to repeat the index at the bottom of my pages).

    Hi I am building a website using iWeb's white template. I can't write HTML, so can't change the index, but would like to repeat it at the bottom of my pages. Does anyone know which typeface Apple used? Presumably it would be 'web friendly' for use as described above?

    Arial
    PS. You can see it in the source of the published page where it says new NavBar etc...
    ".navbar {\n\tfont-family: Arial, sans-serif;\n\tfont-size: 1em;\n\tcolor: #666;\

  • Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K  minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?

    Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K  minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?

    Read this
    iOS: Unable to update or restore

  • Does anyone know if i can use the wall charger from my ipad 3 on the new ipod 5 touch, does anyone know if i can use the wall charger from my ipad 3 on the new ipod 5 touch

    Plan on buying my first ipod touch whe its finally available. Does anyone know if you can use the wall ccharger from an iPad 3 for it. Thanks

    Well all I can say it would have been nice if apple included the charger for the price these things cost. Sometimes you just don't have access to a computer to charge it. I'm OK because I have the iPad charger but I still think its a cheap move on their behalf not including one.

  • Does anyone know a way to modify "Default Settings" printer preset?

    I use enough different presets that I find that the "Last Used" preset for printing if often what not what I really want.
    (Background: I save a number of different profiles for different types of print jobs, so that I can select "Color Production" as a preset, for example, and get a number of printer settings configured as once, like Color Settings, Quality, Color, and duplexing.  These are set and selected using the "Presets" picker in the Print dialog box.  One can use the picker to save and view settings as well.)
    Am I correct in that there doesn't seem to be a way to change the "Default Settings" preset?  The "Show Presets" pick in Presets doesn't offer the ability to change the presets, and the "Default Settings" preset can't be deleted here, unlike the user set presets; it also isn't possible to save a preset as "Default Settings".
    Ideally, changing the default would let me check the box to always use the default (as default), but this way I would have my own defaults.  Just wondering whether I'm missing something obvious - I've tried the modifier keys trick clicking on things, and also the CUPS subsystem at localhost:631.

    jptrovato wrote:
    Does anyone know a way to make a Dell 3110cn Color Laser Printer fully compatible with a Mac operating system?
    Go to the dell support site and download and install the most current drivers for your pring and operating system.

  • Does anyone know a way to reference values in cells from separate sheets?

    Does anyone know a way to reference values in cells from separate sheets?

    I had not used the iCould version.  I just fired it up. So far I don't know how to click to make a reference to another sheet but the syntax for sheet and table names when typing them in is a little different.  If there is a space character in the name, you have to put single quotes around the name.
    ='Sheet 1'::'Table 1'::B1

  • Does anyone know when infinity blade 2 will be on any other app store except the US? south africa to be specific...

    does anyone know when infinity blade 2 will be on any other app store except the US? south africa to be specific...

    Apple Support Communities Use Agreement
    2. Submissions
    Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.

  • Does anyone know what ppqryErrorList is used for in EssOtlQueryMembersEx?

    Given a calcscript, I'm wondering if I can get a list of errors back it has multiple errors (e.g. member not found, syntax error etc.) when I run EssOtlQueryMembersEx.
    I've looked at the documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_api/api_c/otlc/funcs/apcfqmex.htm) and looks like ppqryErrorList does the job for me. However, I'm getting a NULL pointer to ppqryErrorList regardless or whethere there's an error or not.
    e.g. when I call "@ICHILD(blah)" with EssOtlQueryMembersEx I'm hoping the error list (ppqryErrorList) will contain "member not found blah" but it infact returns NULL.
    This parameter on EssOtlQueryMembersEx must be there for a reason. Does anyone know what this is used for?
    Btw, I'm using Essbase 7
    -Steve

    Well, After Effects has a shattering effect, but I'd guess it was a 3D app that created those effects. To see what you can do with Motion, check out this thread:
    Fun with Shattering...
    Patrick

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

Maybe you are looking for