Does anyone know how to comunicate with a USB port using labview 6?

Unfortunately, there is no way to communicate directly with a USB port before LabVIEW 7.0 and VISA 3.0. With the new releases, there are functions called "VISA USB Control In" and "VISA USB Control Out" that give you direct access to a USB port.
You can definitely communicate with DAQ, Serial, or GPIB devices that are connected through a USB port, though. This is done seamlessly through the NI-DAQ, NI-Serial, and NI-488.2 drivers.
Luke S.

Similar Messages

When opening aperture I get Warning that says There was an error opening the database for the library "~/Desktop/Feb 12, 2011.aplibrary". I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?

When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?

Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics

I downloaded and installed XI and when open wants me to buy DC and reenter serial number this gives and error. Does anyone know how to talk with Adobe Chat

I downloaded and installed XI and when open wants me to buy DC and reenter serial number this gives and error. Does anyone know how to talk with Adobe Chat

Hi Kevin ,
It seems like you are getting update to Install Acrobat DC .That is the latest version of Acrobat .
If you are getting an error message along ,could you please share the screen shot of the same so that we can check at our end.
If you wish to connect with Adobe support team ,refer the following link to get in touch with them.
http://helpx.adobe.com/x-productkb/global/service-ccm.html
http://helpx.adobe.com/x-productkb/global/service1.html
Regards
Sukrit Dhingra

I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
Allan

Does anyone know how to record directly to a track using Logic's effects?

Hi there, does anyone know how to record directly to a track using Logic's effects? I know that it needs to run through a buss somehow but I am not quite sure how. Need to Di a bass and want to keep the levels down using a compressor (recording strait into a Mbox with Logic 8). Any help will be greatly appreciated. Thanks.

If you route your Bass into a channel in Logic and put plugins/fx on the channel plus you have monitoring on (and monitoring off on your external mixer) - you can record while listening to the effected sound. However what is being recorded is the clean/raw audio - this is a good thing as you can later change your compression/fx settings - printing the effect at this early stage is normally avoided.
Ian

Does anyone know how to save multiple webpages in safari using automator?

Does anyone know how to save multiple webpages in safari using automator?

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Photoshop CS4- Does anyone know how to tell if two people are using same file?

Photoshop CS4- Does anyone know how to tell if two people are using same file?

Hi,
Thanks for your response. I'm not the solution in the link.
The problem that I am having at work it that several people in our department want to be able to update a file, but we want to be sure that no one else is currently editing that file. If someone has the file open, it's helpful to know the user's name so we can talk about when the next person can edit the file. This works in Excel files that we use, and I would love to find out how to do it in Photoshop and Illustrator.
Thanks for the help!

Does anyone know how to connect with an external modem and AOL service?

i just got the macbook yesterday and the modem came today, and i cannot figure out how to connect with an AOL account using the external modem. does anyone know how, or have the same problem??
Macbook 1.83Ghz White Mac OS X (10.4.7)

Hi MacMan2006! And Welcome To Discussions!
Do you have the AOL software installed?
When you open System Preferences > Network > Location: Automatic & at Show: is there an option to select External Modem?
If so, is your Modem Model listed?
ali b

Does anyone know how to speak with a representative about a billing problem?

Does anyone know how to speak to a representative about a billing problem? I keep getting an automated messge.

Billing problem for what? What is this automated message you're getting?

Does anyone know how to be connected to the internet using the iphone?

Hi I had notice that sometime when I carry my laptop, there is not wi fi recepction, does anyone know if it's possible to use the internet from the i phone and how to be connected? thanks

The simplest solution would be to have a second Chat pod instance that the translator could type into.
Otherwise you can look to use the Closed Caption pod, Closed Captioning, or you may be looking at building a custom pod.

Does anyone know how movies recorded with torrents convert such a way that would see them through Apple TV. Thanks in advance.

Friends! Does anyone as movies recorded with torrents broadcast via apple TV. In iTunes, they are not all copied. Maybe they can somehow transform or there is a way to bypass iTunes broadcast on TV. They are viewed on a computer in vlc player.

Ann154,
You were correct again. I deleted everything I had done to date and re-did the entire SMS backup of my 28 message conversation again and YES I was able to open it using IE-8. It looks great and it prints great and life is good! I am going to go make a donation.
Thanks again for the help. I marked this thread as answered by you.
JerryF

Does anyone know how to chat with iChat 5 connected to a pc with Vista/Aim?

I still can't video chat with relative who has Vista and AIM.
Has anyone actually succeeded with this?
Len in NC

Hi,
Since iChat 3 and AIM on a PC at AIM 5.9 this does seem to have gotten more and more difficult.
To Summarise.
Allow AIM App through Windows Firewall
If The routing device uses UPnP Enable that as well.
In the routing device make sure the AIM port are allowed (If not using UPnP then port 5190, 443 and 1024-5000 should be forwarded)
AS iChat is one of the AIM Clients that can not work with "Real Time" in AIM 6.5 and upwards this should be turned Off at the AIM end.
The six names in Table 1 should be added to Test with (preferably at both ends).
These names show IPs as if they are connected direct to the Internet (No Routing device meaning NO NAT) and can be more successful than your Buddies because of this.
At the Mac End.
The Firewall in Snow Leopard can be Off
If ON, it should have Allowed Signed Apps enabled in the Advanced Button and iChat added to the list.
In the routing device the use of UPnP is better as it allows you to Screen Share in iChat with other Mac Buddies using iChat.
Alternatives.
This section of my Page 5 http://www.ralphjohns.co.uk/page5.html#_other at items 9 through 12 (Web Based Video Chat sites)
Tokbox allows you to link to your existing Buddy Lists. Mebeam is the least fussy layout.
Other options at in the items 5 though 8 (Cross Platform apps that do the same sort of thing).
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:07 PM Wednesday; February 10, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

TS4268 I recently lost an IPad mini before I could get all the icloud, etc. tracking set up. I recently received a notice that it is being used for facetime/imessage. Does anyone know how I could track the person now using my ipad mini?

I recently lost an IPad mini before I could get all the icloud, etc. tracking setup. I received a notice that it is being used for facetime and imessage - is there a way I can find out who is using my ipad mini?

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Report Stolen iPad
http://www.stolenlostfound.org/report-stolen-ipad
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Hi!!Does anyone know how can I programm a vi to launch Labview in Linux?

I want to build an aplication to launch Labview. But the problem is that I am working with Linux, so I can't use Active X to do that. How can I do it? Is there VI server in Labview for Linux?
and if is there Vi server, how can I use this, to launch Labview?
Thanks!!
Graci

Wiebe,
You are absolutely correct. The command line options are the same under Linux as windows.
You could then write a shell script that will launch labview with a particular VI.
Or, you could compile a C/C++ program that calls "exec" to launch labview, and again specify an optional VI argument.
And, VI server works the same under LabVIEW for Linux as it does for windows. But, in order for the VI server to launch a VI, LabVIEW already has to be running This means you could create a VI that uses VI server, and compile that VI into an executable. You can then run the resulting executable which will be made up of the VI that uses VI server.
But your question is a little bit vague. What exactly is your goal after "launching LabV
IEW." You said that you want "an application to launch LabVIEW." Which application? Do you have the source code? What is it written in?
David Duffey

Does anyone know how to import files into FCP X using focus enhancements FS-CV (DTE)?

I've just purchase Final Cut X and the system does not recognise any (most) of the files on my FS-CV DTE hard drive. All files are quicktime.

In FCP 7 I'd normally use the Log and Transfer function to convert the AVCHD files to ProRes. However with FCP X you can use the Import from Camera... command in the File menu or the button shortcut for the same function.
This can be done by connecting the camera, or putting the memory card from the camera into a card reader, and then, from within the Imprt from Camera dialogue, selecting Open Archive and select the camera, card or in my case the backup I've made of the card.
I regularly back up my AVCHD files to hard disk, or BluRay data disk, so I can reuse my SD cards but an important thing to remember when doing this is that you need to copy the whole directory structure of the memory card to a new folder on the hard drive. Simply selecting the .mts files won't work as the 'Import From Camera' function needs to see the whole directory structure to interpret the what files are there etc. I create a new folder and then copy all the folders and files on my card into that folder on my hard drive. When selecting Import from Camera/Open Archive I then choose the folder, not the files inside it. Once this is done the video files are presented and I can audition them and choose to import all of them or select the files I want.
None of these methods require the files to be transcoded prior to import. You can choose the transcoding method during import so that either high quality ProRes files are created or Proxy files, smaller and lower quality for editing.

Does anyone know how to comunicate with a USB port using labview 6?

Similar Messages

Maybe you are looking for