Does anyone know how to connect to wireless internet using a Hitron CVE-30360 cable modem. My Macbook doesn't even see the network?
I just received my cable modem from Hitron and I am unable to connect to it. My phone and other computers and see it as a wireless network but my Macbook doesn't even show it a network that I can connect to. It is totally invisible to my Macbook. Can anyone help with this?
Assuming "BellSouth" uses the same procedure as "SBCGlobal", which are now both ATT/Yahoo, as far as I know:
Take router from box. Connect to power outlet and phone outlet.
Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack.
Point your Web browser to 192.168.1.1 (enter this into your browser's address bar, actual address might vary, check your router's documentation.)
A Web form will appear. Set router to PPPoE, if necessary. Enter the user name your ISP gave you. Enter the password.
Watch all the lights on your router go green.
Or, if the router is already set up, since you used it with your Dell laptop previously:
Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack. Done.
The second from the left is your Ethernet jack:
http://store.apple.com/Catalog/US/Images/mb-side-white-050906.jpg
Similar Messages
-
Does anyone know how to connect an iphone internet to a pc
Does anyone know how tp connect an iphone to a pc for internet
Read here:
http://support.apple.com/kb/ht4517 -
Does anyone know how to connect wireless speakers with itunes through airplay?
Does anyone know how to connect wireless speakers with itunes through airplay? I am not getting the airplay icon in itunes.
JBL doesn't have any speakers called "Spiral" that I can find, but anyway, perhaps something in this Apple support article on AirPlay troubleshooting will help:
http://support.apple.com/kb/TS4215
Regards. -
Does anyone know how to get an ipad to use the wireless network from an airport?
Does anyone know how to get an Ipad to use the wireless network from an airport express?
By default, the AirPort Express will broadcast an unsecure wireless network with a Network Name of something like: Apple Network NNNNNN. Your iPad should "see" this network and be able to connect to it. Have you tried going through the iPad's Settings > Wi-Fi > Choose a Network... option. If so, does the AirPort's wireless network appear in the list of available networks?
Can other wireless devices connect to the AirPort's network? -
Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????
I believe you naeed the Apple ADC to DVI adapter.
-
Does anyone know how to connect an iphone bluetooth to a car builtin Kenwood DNX7100?
Does anyone know how to connect an iphone bluetooth to a car builtin Kenwood DNX7100?
Check the user instructions for the Kenwood.
-
Does anyone know how i can view PDF files using Galaxy Note 2?
Does anyone know how i can view PDF files using Galaxy Note 2?
This is what i have been doing;
I click on the file i wish to view (via a portal)
this file goes to notification widget (i drag down screen)
notification/message says download complete
i click on notification/message
nows it says complete action using (here i only have 2 icon options 1= DB Text Editor 2 = HTML Viewer)
I have installed Adobe Reader.Can you confirm if the downloaded file is a pdf file, that is it ends with .pdf?
-
Does anyone know how to load ACR presets when using ACR in the creative cloud?
Does anyone know how to load ACR presets when using ACR in the creative cloud?
Moving the discussion to Adobe Camera Raw forum.
Thanks,
Atul Saini -
Does anyone know how to remove multiple wireless profiles?
Interestingly enough, I recently setup a new computer with the same itunes library as my old computer which I moved to another part of the house. I renamed BOTH libraries from their previous names. These are both iMacs. Now, all my iOS devices (iphones/ipads/etc.) show up on BOTH and wirelessly sync to BOTH! So, I turned off wireless sync on one of the machines but the devices still show up in the menu. Also, on the devices themselves both libraries show up as available to sync. Does anyone know how to remove the wireless capabilities from one computer or device so the devices just sync with a single library?
The instructions that are on reedcorner are great, however if you wish to do things in a simpler way; I have created an Automator workflow that can take you through the process. You can download it here: https://public.me.com/edson.ajj
-
Does anyone know how to connect to Bell South DSL under PPPoE?
I am having problems connecting to the internet.I have Bell South DSL. I was using a Dell laptop which used a USB cable to connect to the internet. Now that I have my first Apple (Macbook) I have been told to use the Ethernet cable that Bell South gave me instead of the USB. (They gave me both and they are labled) But the Ethernet cable B.S. gave me doesnt seem to fit into any ports on my Macbook. Once I get that situated, I was told to set my settings to PPPoE. Does anyone know how to do this or have any suggestions to my cable problem? And how do I get to Tiger from my Macbook? I cannot seeem to find it. Any input is appreciated.
Assuming "BellSouth" uses the same procedure as "SBCGlobal", which are now both ATT/Yahoo, as far as I know:
Take router from box. Connect to power outlet and phone outlet.
Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack.
Point your Web browser to 192.168.1.1 (enter this into your browser's address bar, actual address might vary, check your router's documentation.)
A Web form will appear. Set router to PPPoE, if necessary. Enter the user name your ISP gave you. Enter the password.
Watch all the lights on your router go green.
Or, if the router is already set up, since you used it with your Dell laptop previously:
Take Ethernet cable, plug one end into the router's jack marked LAN, plug other end into your computer's Ethernet jack. Done.
The second from the left is your Ethernet jack:
http://store.apple.com/Catalog/US/Images/mb-side-white-050906.jpg -
Does anyone know how to connect with an external modem and AOL service?
i just got the macbook yesterday and the modem came today, and i cannot figure out how to connect with an AOL account using the external modem. does anyone know how, or have the same problem??
Macbook 1.83Ghz White Mac OS X (10.4.7)Hi MacMan2006! And Welcome To Discussions!
Do you have the AOL software installed?
When you open System Preferences > Network > Location: Automatic & at Show: is there an option to select External Modem?
If so, is your Modem Model listed?
ali b -
Does anyone know how to edit an ITunes song, using either ITunes, or another app
Does anyone know how to edit a song in ITunes? I want to shorten some songs. Thanks for any help. Tod
The following user tip might be of some help:
Chopping a music track into shorter pieces using iTunes for Windows -
Does anyone know how to connect the iPhone to a peripheral and keep it charging?
Now that a number of medical devices can be attached to the 30 pin or to a lesser extent the lightening connector this creates the obvious conundrum of what happens when the battery of the iPhone dies and you still want MORE data?
The answer came in this review for a pulse oximeter
http://www.amazon.com/review/R2LR18B4LT26F8/ref=cm_cr_pr_perm?ie=UTF8&ASIN=B00A1 G7VRS&linkCode=&nodeID=&tag=
The problem is that I have not been able to find this device that he references that describes a 30 pin extender that also has a connection to a USB (albeit mini USB) connector to allow charging and connection to an additional device.
Now granted that this may pose risks to the iPhone & as you can see in the review many of the device manufacturers don't like it, but this could come in handy and very useful for certain applications.
Does anyone know what this is called and where to find it online to buy? or does anyone have a better solution such as a 30 pin splitter that will actually allow each device on the split to still communicate with each other (my guess is most splitter would allow dual charging, but will not allow you to actually get data sent across from the one device to the other).
Thoughts?What exactly is this "text divider"?
A graphic? If so what format?
Peter -
Does anyone know how to connect there computer to the enternet using iphone
I was wanting to know how to connect my computer to the internet using my iphone.
You can't, not supported
-
Does anyone know how to monitor a microphone when using Voice Over tool?
I use Final Cut studio in conjunction with an AJA Kona LHe card. Audio inputs are via the AJA. I monitor the output from FCP through the AJA card via a Samson C-Control (monitor matrix). Here's my problem. When I'm recording voice over, I am unable to monitor the sound from the microphone through the headphones (or speakers). There is definitely an audio feed being routed to the headphones as I am able to hear the audio cue countdown. The microphone is working fine too - when it comes to playing back the voice over through the headphones (or speakers), I can hear the track absolutely fine. Has anyone experienced the same problem... and do you know how to solve it? Many thanks, AW
its not that you've anything screwy going on .. this is the way it is engineered to work.
the pre-existing audio (and cues) is routed to the headphones but not the voice being recorded.
the solution is to use an audio mixer to monitor both the voice over and the timeline
Maybe you are looking for
-
Is there a way to reset the battery to make it last longer without getting a new battery?
I have an ipod touch 4th generation 8GB and the battery was ruined by accidentaly overcharging it a few times. I was wondering if there was a way to fix the battery so it returns to the charge it is supposed to hold. I currently have without getting
-
hi, I am trying to update my ipad to the latest version of IOS but first I want to backup my information into itunes but I am getting a message that said that I am not connected. can you please help me? Thanks. Marcela <Email Edited by Host>
-
Unable to insert the record to table using pre-insert & pre-update trigger
Hi All, I have tried to insert and update the backend table using the pre-update and pre-insert triggers. But its not working for me. Please find below the code which i have used in the triggers. Pre-insert trigger: DECLARE v_cust_num_cnt NUMBER; BEG
-
ORDER BY with a Specific value first
I am creating an Employee Contact page in ASP that populates a table with a SQL query (command). I want to sort the employees by last name (which is obviously an easy SORT BY property), but I need to show the Managers first. How can I display emplo
-
Setup NWA for XI landscape - error in CIM on SLD.
I am currently setting up the Netweaver Administrator (NWA)and have noticed a "peculiarity" between systems in the CIM landscape. My landscape is made up of dev, qas and Prod (XI 3.0, oracle 9.2.0.6 windows 2003 cluster) . I have an app server and d