Does anyone know how to get around this error?
I have seen this error message alot, especially when trying to change the speed of a clip. It usually occurrs after cutting the clip down from its original form. OR just cutting a clip into two parts.
The message says,( Unable to complete command. a conflict occurred during a trim operation)
If anyone can help me out with this I would really appreciate it.
Stephen......
It means the operation you intend can not happen because there are most likely collisions between clips that you do not take into consideration that prevent it to happen.
What does this mean? If, for example, you want to do an insert edit, when you drop your new clip into the timeline, as the clips downstream move, there may be one clip in the audio track that will not move and so, the other clips can not move as well. FCP will not alter things unless you explicitly tell it to.
x
Similar Messages
-
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123381) -
I have blocked my iphone 4 and tried to restore it but hen I did it asked me for my itunes password that I dont remember. My phone seems to be stuck on this stage now anyone know how to get around this? Thanks
There is no way to get around activation lock, you must recover your password for the AppelID that it is locked to:
http://iforgot.apple.com
iCloud: Activation Lock -
My husband been froze out of his Apple I'd account. His rescue email is no longer in use and he's forgot the answers to his security questions.
Anybody know how to get round this?i think, You have to contact the Hotline to fix this, because You have to authenticate Yourselfe in an unofficial Way like Credit Card Number.
-
I have this error coming up 150:30 does anyone know how to get around it?
when I open Photo Shop it says error 150:30
Try this:
Error "Licensing has stopped working" | Mac OS
Nancy O. -
i forgot my lock screen password is there anyway around that and if not how can i reset without being able to get into the system
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
itunes wont open. this is message I'm getting. Any ideas?
Hello there, ytnoj.
Uninstalling and reinstalling iTunes can be a tricky endeavor and must be done in a very specific way. The following Knowledge Base article provides the step-by-step of the process:
Removing and Reinstalling iTunes and other software components for Windows XP
https://support.apple.com/kb/HT1925
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
When I launch product I get stuck in a sign in loop. Does anyone know how I get round this?
Each time I get a sign in message with y ID on it, I select sign in, receive a thank you message, I then select continue - only to get the initial sign on message. I am signed in.
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792 -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
Does anyone know how I can solve this. My cat managed to move iphoto tab to the middle of the screen and now I cannot open it and get this message.
You cannot open the application iphoto because it may be damaged or incomplete
Any help appreciatedYou need a more technically saavy cat, for a start.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?
Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics -
Does anyone know how to get this baby...
Does anyone know how to get this baby back to how it was when it left the Apple Store? I think I've made some errors moving some stuff from my old computer and just want to start all over again... Like when I first booted it up out of the box.
Insert the Install DVD 1 that came with your baby, reboot with the c key held down. When the installer launches, select Erase & Install. (The Archive & Install option will preserve your data, but also most likely some of the problematic files.)
-
There is suddenly a gray shelf under the app icons in dock. does anyone know how to get rid of this?
there is suddenly a gray shelf under the app icons in dock. does anyone know how to get rid of this?
Take a look at the various suggestions in 'More like this' >>>>>>>> to the right of your original post. And don't forget the links within the threads. Several people have had that problem.
-
Does anyone know how to get a hold of someone in charge of QA
Customer support is dire! I have spent long hours dealing with costumers service <whose only modes of help are sending me out to buy something new or provide me with a hyperlink to help page that was two clicks away anyway> Between thier lack of knowledge and SARCASTIC JABS it's amazing that I have retained my sanity. I won't go into details but I'll catch you up. 4 sessions in live chat with LOOOONG delay in between responses and I can not make recovery disc, my phono jack does not function properly, my system can not communicate MTP <you know, what you use to fill your ipod, and I kid you not there is a fan LITERALLY RATTLING AROUND inside my 2 month old notebook. So what do I do? I exhaustively seach for away to get a hold of customer service, and all I can find are blogs about how HP costumer service sucks. Bear in mind that I did not put suck into my search engine. I put "HP QA and HP customer service" into google and what returned was BLOGS ABOUT HOW HP CUSTOMER SERVICE SUCKS. Those were the most relevant results in google. So I finally come to this forum and find a thread about..........you guessed it hp customer service sucking.....but oh no an HP moderator locked it down and provided a link to the page where one can obtain the very customer service that has been deemed insufficient by the very COMMUNITY that it is supposed to support. WE PAYED YOU PEOPLE! YOU ARE HERE FOR US NOT WE FOR YOU.
Does anyone know how to get a hold of someone in charge of QA
I will eventually shake the correct bush and flush someone out and I will share my information.......any advice COMMUNITY?Hi zach317,
Thank you for visiting the HP Support Forums. As stated in the thread you have cited, the purpose of this forum is to give feedback or make suggestions on ways to improve the forums. Should you have feedback on other issues, please contact HP directly using this link. This is a user-to-user forum, so you'll have to use this link for direct assistance from HP.
Many members of the community are extremely knowledgable. If you're having an issue you believe the other users in the community may be able to assist you with, please feel free to find the appropriate forum and post your question there.
Should you have any further questions or concerns, you can send a Private Message to me or another moderator or admin at any time.
Thank you!
Message Edited by SandyD on 11-22-2008 03:03 AM
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation
Maybe you are looking for
-
Co code Segment is greyed out while creating a Business partner
Hi All, I am trying to Create a Customer thru BP . I have asigned a role and made the necessary setting in " Configure Field attributess as a per BP role. However the Co code segment is coming greyed out . Can you please advise what needs to be done
-
Can't create account Checksum required by BoA's for Wire Transfers
Hi All, I have created an eText template using BoA's BAFF file format specification. Everything works great except for when trying to calculate the account number hash/checksum for the P80 record, last record in file. The spec for the checksum is as
-
I am no longer able to send emails from within iPad apps.
I always used to be able to send files with attachments by email from within iPad apps like Adobe Reader or Pages. Used to work but now it doesn't - and this for all apps all at once. It gets to the point where it has prepared the email, but if you p
-
I need help...how dom i create a sound clip on my itunes libary?
-
How do I GET RID OF GOOGLE in the search in the middle of my screen?
I am not talking about Google on the top right corner of my screen, I am talking about the middle of the monitor where it has Google tied in with Firefox? I got rid of Google altogether because of the drop down box when searching, everything I tried