Does anyone know how to paste a screen shot?
Does anyone know how to paste a screen shot (command, shift,3) into a microsoft word for mac document? Every time I try to "paste" all I get is the previous item I cut or copied and not the screen shot...
Post on the MS Mac forums, as it's their software you're having issues with: http://answers.microsoft.com/en-us/mac
Similar Messages
-
Does anyone know how to replace T420s screen
i bought a new screen for my t420s but can not figure out how to remove old and replace. there are no you tube for this model.
can anyone help out.
Solved!
Go to Solution.BEFORE YOU START:
Remove ALL power from the unit, including a modular bay battery if you have one. Then hit the power button on your keyboard a few times to make sure the unit is fully discharged.
There are 2 screws underneath 2 black stickies at the base of your screen. Take those off and unsnap the bezel revealing another 4 screws holding the screen in place.
Take those out and gently tilt the lid forward and the LCD will tip right out. (Catch it obviously)
You'll need to peel off more tape and unhook the connector.
After that just follow everything in reverse.
NOTE: BE SURE the connector is back in place solidly. If it's in there a bit loose or crooked you can cause a short in the motherboard when you turn the unit back on.
I've done plenty here. Ask away if your stuck anywhere, but it's really pretty simple compared to older models. -
Want to play tv shows purchased on iPad on Apple tv. When I touch icon for apple tv and choose "apple tv" it asks for an apple tv password. We have never set up any password and can't get past this screen. Does anyone know how to find this password?
You can remove the Airplay password from the Settings menu on your AppleTV.
-
My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?
Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out. -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?
If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash. -
My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
ThanksTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I went to use my ipod touch 8GB but it wasn't working, when i looked closer it was on just very very dim. The brightness is turned up all the way and the screen is practically black.. does anyone know how to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings If yu can see the screen enough to do it)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem.
Apple Retail Store - Genius Bar -
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!
Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!
-
My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.
I would use Quicktime Pro.
See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923 (Quicktime 7.6.6 is the latest version.)
To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html -
The red, green and yellow buttons in the upper left corner of the screen disappear whenever I open Safari. I cannot minimize the Safari window which I often need to do if I am coordinating multiple windows between different applications. Does anyone know how to get those buttons back? I guess I could just switch betwen appliations, but I am used to doing it the other way.
You're welcome
You had Safari in full screen mode. -
my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?
- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore -
my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help
If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
Using iMovie-does anyone knows how to put two videos side by side in the same screen/
Using iMovie-Does anyone knows how to put two videos side by side in the same screen?
See iMovie Help here.
http://help.apple.com/imovie/mac/10.0/#movb8c659f55
Maybe you are looking for
-
Upgrade to Lion: Mail is not compatible and won't open. How do i reinstall an updated version Mail?
So, I'm currently trying to update my parent's computer and in the process of updating their Mail application it has become unusable. My computer at home (not my parents computer) ran into the same problem before I updated to Lion and deleting the p
-
File Vault issues. How can I turn it off?
After reading all about the issues people have been having with File Vault and because the constant encrypting-decrypting is slowing down my computer, I decided to turn File Vault off. There's just one problem. I can't. Every time I try to turn off F
-
I have a preloader that will externally load my swf however when I run it it is producing this error VerifyError: Error #1014: Class flash.text.engine::FontDescription could not be found. My preloader code works on another swf but not on this one. My
-
"/dev/sdb2 is apparently in use by the system" when it shouldn't be.
I'm attempting to format a partition on my second hard drive in preparation to install Arch, and I'm getting the message: /dev/sdb2 is apparently in use by the system; will not make a filesystem here! I have checked the forum for an answer and found
-
File version is later than the current LabView version
I have LabView 2010 and I need to use an instrument driver that was written in LabView 2012. Is there any way I can get this driver to work with 2010?