Does anyone know how to record directly to a track using Logic's effects?

Hi there, does anyone know how to record directly to a track using Logic's effects? I know that it needs to run through a buss somehow but I am not quite sure how. Need to Di a bass and want to keep the levels down using a compressor (recording strait into a Mbox with Logic 8). Any help will be greatly appreciated. Thanks.

If you route your Bass into a channel in Logic and put plugins/fx on the channel plus you have monitoring on (and monitoring off on your external mixer) - you can record while listening to the effected sound. However what is being recorded is the clean/raw audio - this is a good thing as you can later change your compression/fx settings - printing the effect at this early stage is normally avoided.
Ian

Similar Messages

  • Does anyone know how to comunicate with a USB port using labview 6?

    Does anyone know how to comunicate with a USB port using labview 6?

    Unfortunately, there is no way to communicate directly with a USB port before LabVIEW 7.0 and VISA 3.0. With the new releases, there are functions called "VISA USB Control In" and "VISA USB Control Out" that give you direct access to a USB port.
    You can definitely communicate with DAQ, Serial, or GPIB devices that are connected through a USB port, though. This is done seamlessly through the NI-DAQ, NI-Serial, and NI-488.2 drivers.
    Luke S.

  • Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

    Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
    I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
    I have attached the VI.
    Thanks for the help
    Attachments:
    new_control_and_acquisition_program.vi ‏946 KB

    Take a look at this document that discusses how to monitor IMAQ memory usage:
    http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
    Hope this helps -
    Julie

  • I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

    If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
    I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

    The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
    If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
    Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
    Allan

  • Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisitio​n VI to predict when it is time to cease the acquisitio​n to prevent the program crashing?

    Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
    I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
    I have attached the VI.
    Thanks for the help
    Attachments:
    new_control_and_acquisition_program.vi ‏946 KB

    got these vi's off ni site a while ago - see if they help
    Attachments:
    Memory_Monitor.zip ‏132 KB

  • Does anyone know how to save multiple webpages in safari using automator?

    Does anyone know how to save multiple webpages in safari using automator?

    You will likely get better program help in a program forum
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Photoshop CS4- Does anyone know how to tell if two people are using same file?

    Photoshop CS4- Does anyone know how to tell if two people are using same file?

    Hi,
    Thanks for your response. I'm not the solution in the link.
    The problem that I am having at work it that several people in our department want to be able to update a file, but we want to be sure that no one else is currently editing that file. If someone has the file open, it's helpful to know the user's name so we can talk about when the next person can edit the file. This works in Excel files that we use, and I would love to find out how to do it in Photoshop and Illustrator.
    Thanks for the help!

  • Does anyone know how to set up Vienna Ensemble Pro in Logic?

    Hi - new to Vienna Ensemble Pro, so sorry for the ridiculous question
    I am trying to add some of my Logic instruments into an instance of VEP, but It is not avail to me. (http://bit.ly/sdAwNl)
    I see them in my channel strip settings when I bring up Logic, (http://bit.ly/ukLlPj) but I can't seem to access them via VEP. 
    Does anyone know why, and how to fix?
    I'm running Logic 9 on a Mac OSX 10.6.8

    Hi
    Built-in Logic instrument plugins are NOT available outside Logic. VEP can only use 3rd party Audio Unit (& VST?) instrument plugins.
    CCT

  • Does anyone know how to be connected to the internet using the iphone?

    Hi I had notice that sometime when I carry my laptop, there is not wi fi recepction, does anyone know if it's possible to use the internet from the i phone and how to be connected? thanks

    The simplest solution would be to have a second Chat pod instance that the translator could type into.
    Otherwise you can look to use the Closed Caption pod, Closed Captioning, or you may be looking at building a custom pod.

  • Does anyone know how movies recorded with torrents convert such a way that would see them through Apple TV. Thanks in advance.

    Friends! Does anyone as movies recorded with torrents broadcast via apple TV. In iTunes, they are not all copied. Maybe they can somehow transform or there is a way to bypass iTunes broadcast on TV. They are viewed on a computer in vlc player.

    Ann154,
    You were correct again.  I deleted everything I had done to date and re-did the entire SMS backup of my 28 message conversation again and YES I was able to open it using IE-8.  It looks great and it prints great and life is good!  I am going to go make a donation.
    Thanks again for the help.  I marked this thread as answered by you.
    JerryF

  • Does anyone know how to import files into FCP X using focus enhancements FS-CV (DTE)?

    I've just purchase Final Cut X and the system does not recognise any (most) of the files on my FS-CV DTE hard drive. All files are quicktime.

    In FCP 7 I'd normally use the Log and Transfer function to convert the AVCHD files to ProRes. However with FCP X you can use the Import from Camera... command in the File menu or the button shortcut for the same function.
    This can be done by connecting the camera, or putting the memory card from the camera into a card reader, and then, from within the Imprt from Camera dialogue, selecting Open Archive and select the camera, card or in my case the backup I've made of the card.
    I regularly back up my AVCHD files to hard disk, or BluRay data disk, so I can reuse my SD cards but an important thing to remember when doing this is that you need to copy the whole directory structure of the memory card to a new folder on the hard drive. Simply selecting the .mts files won't work as the 'Import From Camera' function needs to see the whole directory structure to interpret the what files are there etc. I create a new folder and then copy all the folders and files on my card into that folder on my hard drive. When selecting Import from Camera/Open Archive I then choose the folder, not the files inside it. Once this is done the video files are presented and I can audition them and choose to import all of them or select the files I want.
    None of these methods require the files to be transcoded prior to import. You can choose the transcoding method during import so that either high quality ProRes files are created or Proxy files, smaller and lower quality for editing.

  • I downloaded a ringdown direct from itunes to my iphone 4S. When I go to settings/sounds/ringtone, the new ringtone is not there! I have downloaded it twice, but still not there. Does anyone know how to resolve this?

    I downloaded a ringdown direct from itunes to my iphone 4S. When I go to settings/sounds/ringtone, the new ringtone is not there! I have downloaded it twice, but still not there. Does anyone know how to resolve this?

    Thanks, your advice prompted me to look at it again on itunes, and discovered that i have actually downloaded the full song instead of the ringtone. False alarm...and thank you!

  • Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page i.e the reverse side of the page, in the correct direction?in the

    Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
    It worked perfectly last week, now there are problems.
    Thanks for any advice.

    Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
    It worked perfectly last week, now there are problems.
    Thanks for any advice.

  • Does anyone know how to make songs in your playlist play directly after each other with no break between then, ie no silent period?

    Does anyone know how to make songs in your playlist play directly after each other with no break between then, ie no silent period?

    you cannot.

  • Does anyone know how I can record the screen and myself at the same time?

    I have seen videos of people using their isigght camera to record their screen and a video of them is in the shape of a square on top of a corner of the screen.
    Does anyone know how I can do that?

    macnewcomer22 wrote:
    I have seen videos of people using their isigght camera to record their screen and a video of them is in the shape of a square on top of a corner of the screen.
    Does anyone know how I can do that?
    I'm not certain I know what you want to do, but consider these ideas:
    (1) If you have seen a video of people doing it, the people who made the video surely know how. Ask them if you can.
    (2) You may be able to do what you want with this app:
      http://b-l-a-c-k-o-p.com/CamCamX.html
    (3) The easiest way I was able to record my screen and simultaneous video of me in a window in the top corner of my display was to use two webcams. I used QuickTimeX to make a screen recording while I used my built-in iSight to show me moving in my Photo Booth window on the display.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

Maybe you are looking for

  • What Exactly is Happening in this Program???

    Hello All, Here is a Program, package myDemo; public class MyOverRidingDemo {      public MyOverRidingDemo() {           super();           // TODO Auto-generated constructor stub           A obj=new B();           obj.add();           System.out.pri

  • Spry menu works fine local and turns the whole web page white when it goes live. Please help.

    Thanks in advance to anyone who helps me out with this problem.  I have been working on it all day and I took the time to design nice buttons in Photoshop and backgrounds.  It works perfect viewing it in my browser locally.  I have ran into a problem

  • Problems with displaying pictures for albums on iPod screen

    Hello! I have an iPod with 60gigs and since I've updated to software version 1.1 I couldn't display any new CD-covers on the iPod screen related to the album that is playing. Strange thing is that when I play the same song from the iPod in my iTunes,

  • SMB problem?

    When I try to connect to a Windows 2003 disk, in Domain, I get this error: The alias "XXXX" could not be opened, because the original item cannot be found. When I try it with Go/Connect to Server then smb://name.of.the.pc.or.IP/share.name I get promp

  • Dialog box to emulate windows lock'ing mechanism

    is there a way to put up a dialog box or a simple panel with username and password that locks (sort of) locks windows and you cannot perform anything unless you enter something? it is assuming that we're not using the same entitlements as our windows