Does anyone know how to use ELVIS in Labview to get current and voltage measurements?

Trying to use ELVIS in Labview to get measurements with a NI myDAQ.

I have changed from using the ELVISmx driver as I was unable to call on the digital multimeter of the myDAQ twice, I have set up a VI using the DAQ assistant with the myDAQ, I am using the AI0 port for a voltage reading and using the DMM for my current reading, the circuit is working as I am measuring the voltage on a resistor after the ammeter but I am unable to get a current reading in order for it to work. If I have something wired wrong please let me know, thank you. My circuit is a 12VAC power supply, going through a potentiometer to drop the voltage to 8VAC, which passes through a resistor, ammeter is in series after this and attached to another resistor to complete my loop, the AI0 for my volt meter is connected across the second resistor, I have the proper voltage reading when I run the VI, but am unable to get a current input. Thanks for the help.
Attachments:
Mikes Project2.vi ‏131 KB

Similar Messages

  • I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

    I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
    It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
    I don't want to start again with rating my (beautiful classical) music!
    Thanks, from Amsterdam, NL

    Did you do the move via Home Sharing, astro?
    If so, perhaps try the instructions from the following post:
    Re: i transfered itunes to my pc playlists did not go

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • Does anyone knows how to use Assistive Touch in iOS 5

    Does anyone knows how to use assistive touch in iOS 5? Thanks.

    LiveCycle is J2EE based, so you the way to interact with LiveCycle would be using SOAP (web services).
    See the following documentation:
    http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?&accessible=true
    http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?&accessible=true
    http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?&accessible=true
    Jasmin

  • Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

    Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

    BM,
    Pop-Up menu format is not dynamic. It is created in the Cells Inspector and can't be modified contingent upon the state of other cells.
    You could program a table to list the options available for the previous selection, but it wouldn't be in the form of a Pop-Up.
    Jerry

  • Does anyone know how to use ATV with a keynote presentation?

    Does anyone know how to use ATV with a keynote presentation? Is it possible?
    Thanks.

    Yes use Quicktime. Try to create a presentation that uses a widescreen aspect 1280 x 720 would be good, then export it at full quality which should give you a movie of 720p at 24 fps and should be just fine for the tv, if you have any problems with exporting it this way, you could try manual settings or simply run the export you made at full quality through itunes using advanced/create an Apple tv version.

  • Does anyone know how to use music transfered from another phone to the iphone as ringtones?

    Does anyone know how to use ringtones that I put on my iphone from my previous phone? It went in as music and now I cant use as ringtones and figure out how to put it as ringtones.

    Two ways to do this:
    Download an app, such as RMakerPro, which uses music on your phone to create ringtones.
    Plug in to iTunes and find where your ringtones are listed. Drag them to your desktop, and then you will need to change the file type to .m4r, which can be done at www.freefileconvert.com.

  • Does anyone know how to use you apps once you've done a bypass on screen activation ?

    Does anyone know how to get your apps to work sfter
    You've done a bypass on ios7 screen activation

    How did you bypass the activation screen?

  • Does anyone know how to change .mov to a supported file extension (and what extension would you suggest)? .mov works on Apperture 3.0 so I thought it would work on Final Cut Pro X....

    Does anyone know how to easily change a .mov file extension to one of the accepted Final Cut Pro X extensions?  I thought since .mov worked in Aperture 3.0 it should work on FCP X.  Thanks

    Hi Tom
    Thanks
    I am now doing some 1 minute import tests from various Q/T's
    They are all in the same place on an External 1 TB Western Digital - connected by Firewire 800
    I have just imported some 1 minute tests from  other Q/T 's and they have imported Ok - quickly imported and transcoded etc fine and quickly.
    Using your suggested methd of getting the details using Quicktime 7 Movie Inspector I can see NO DIFFERENCE in the formats!  In fact with four of these files open I can click on each in turn and see the Inspector details for each in turn - and only the name, size etc changes - not the format!
    I am really upset and confused by this as I have been trying for the last four days to get these imported.  I realise that this is small potatoes to those who are having problems with even FCP 7 Files!  But, these are q/t's of 30 hours worth of unique reserahc material I shot in Africa. I have made several programmes from this material before (one even shown on Discovery!)  I WAS hoping that I could use the new and all singing FCPX to make some new programmes for teaching purposes
    But, how can I do that if only some will import?  As I posted elsehwre - i get the message "No importable files"
    I am REALLY grateful for your expertise and advice here
    thanks
    Alan
    PS  I am using Lion

  • Does anyone know how to contact Apple by email, I am currently travelling overseas and don't have a phone that works that I can call them on?

    Hi Guys,
    Im currenlty travelling and don't have a phone I can use to call Apple support, does anyone know an email address I can use?
    Thank you

    You show no location but as your travelling book a genius appointment
    http://www.apple.com/uk/retail/geniusbar/

  • Does anyone know how to use the bcc functionality for apple mail while accessing it on the cloud from my PC?

    I am currently away from my MAC and want to send an email through apple mail with the bcc functionality.  I am using the cloud to get to my mail, however, I can't figure out how to use the BCC functionality, please help.  Thanks!

    Open your mail,
    lower left corner click on settings,
    go to composing and check BCC, save and your done

  • I change my computer and now i can not sincronize outlook with the new one. Does anyone knows how to do it?, I change my computer and now i can not sincronize outlook with the new one. Does anyone knows how to do it?

    I would like to know how to sincronize my IPhone 4 with a new computer. Thank you

    Same way you synced it with the old one.
    Make sure you have copied everything from the old computer, or your backup copy of the old computer, to the new one.
    What problem are you having?

  • Does anyone know how to use Retropect back soft ware - I need help with it

    Is there anyone familiar with Retrospect Backup software here who might be able to help me with the following problem ?
    My 2007 iMac  with the tiger 10.4.11 OS suddenly crashed exactly two weeks ago when I told the trash to empty. The reason was that some malware or virus had appeared on my computer. There was an alias icon on the desktop that linked to a core item in the system folder; that is why it crashed. It was the malware that put it there somehow.
    So, I was left with a dead computer without an operating system to make it work.
    I telephoned Applecare for help as I was clueless as to what to do. Because I can’t write the thousands of words here to describe the ghastly experience Applecare have been I will miss that out for the time being. Suffice to say it has been utterly excruciating and horrible and I have so far lost all my data, including all the software I have ever bought, because of them. That’s 23 years of writing stuff onto to all the previous Macs I’ve owned.
    So, the question is this. I have a Retrospect backup software backup in my external hard disk. This should still have all my information on as it was a backup made just the day before the computer crashed.
    But I no longer have the Retrospect software on either my external hard disk or on the computer, so when I double click on the Retrospect icon in the external hard disk I get a message asking me to find the application software to open it with. I haven’t got it ( thanks to applecare’s utter incompetence).
    Applecare had insisted that I would be able to retrieve my data from this backup if they installed Snow Leopard to make the computer work. But when I tried to do this the computer crashed again and I was left without an OS again.  Yet another visit to the ‘genius’ bar (what a joke) at the Applestore and this time they installed Leopard which ended up leaving me without any data at all.
    The Retrospect support people told me that I could only retrieve information from this backup if the computer had the original Operating system, i.e. OS Tiger 10.4.11.
    The question is, can anybody here tell me exactly how to retrieve a Retrospect backup from my external hard disk, because so far, both Applecare & Retrospect support have not been of any help at all really and I have spent every waking minute of the past two weeks trying to sort out this problem without any success so far.
    Help !

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • Does anyone know how to use a self signed certificate with apple mail??

    Ive read about it in mail's help and tried to set it up according to it. Ive created a self-signed certificate but have no idea how to set it up as it would work with Mail so that i would be able to send signed messages. could anyone help me??

    Hello rado:
    Welcome to Apple discussions.
    I am assuming this is what you read:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8916.html
    If you follow the instructions when you set up the certificate, you should be fine.
    Incidentally, most +"ordinary users"+ (like me) do not use this function. I am curious as to why you want to jump through hoops in your Mail application.
    Barry

  • Does anyone know how to use the Yoga 2 Pro Recovery Media?

    Hey guys,
    Tech support is not being helpful at all. I paid $60 just for some recovery discs to recover my accidentally formatted Yoga 2 Pro. The discs came with no instructions whatsoever, and using them is weird. First of all, there is two disc 1's, no disc 2, yet there is a disc 3 and 4. Support confirmed this is normal. There is also no prompt between discs 1,1, and 2, so despite making my best guess at when to switch, I can't confidently say I'm not screwing things up.
    After the whole process completes, the bios can't find bootable media. 
    Tech support confimed that I'm missing a small step, but won't disclose what it is unless I pay for premium support.
    Can anyone provide instructions for the recovery media? Tips or pointers that you remember when you are installing?
    thanks!
    Solved!
    Go to Solution.

    Take a picture of the disks and upload it here. Worst comes to worst, ditch those disk and install a retail version of Windows 7 (unactivated---so it won't be illegal to use). Use a bios windows key snooper > Take your OEM key to Microsoft website and legally download a copy of Windows 8 for free.
    ....also, does the OKR system not work? I am aware that you reformated your main drive... but, did you change the tables or partition sizes?

Maybe you are looking for