Does anyone know if m-audio 410 will work with OS 10.8?

does anyone know if m-audio 410 will work with OS 10.8?

The Canon UFR2 v2.41 driver for 10.7 that was released last month also works fine on 10.8.
This driver is for UK English regions where your model is known as the iR1024iF. If you want to check the Canon USA web site for the US English version of the UFR2 v2.41 driver then you should get the correct model name.

Similar Messages

  • Does anyone know if any usb keyboards will work with a imac g3

    Do all usb keyboards and mice work with the imac g3

    Jimmer,
    Just a note on PC keyboard function keys.  The windows function keys work but you will get frustrated by the location of the command key.  The 'undo' and 'cut' and 'copy' and 'paste are z x c and v but the command key on a PC keyboard is where the 'control' key is on a mac.  You will be giving the wrong command if you use the mac key location and the PC location is a stretch for your thumb to reach.  There is no harm done by plugging in another brand of USB device.
    Jim~

  • Does anyone know if the scanner function will work for an Epson Workforce 840 aio printer using Mountain Lion 10.8.2?

    Does anyone know if the scanner function will work for an Epson Workforce 840 aio printer using Mountain Lion 10.8.2?  How is the compatiblity generally speaking?

    Hi,
    The Epson Workforce 840 do support scanning on Mountain Lion via Apple Image Capture.
    You may find the steps to configure the scanner by following the ICA Scanner Driver section below:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=168363&infoType=Dow nloads&platform=OSF_M_X8
    Regards,
    Shlomi

  • Does anyone know if logic 7.1.1 works with Leopard?

    Hi does anyone know if logic 7.1.1 works with Leopard?

    It's not even compatible with Windows 7 and probably you will find many browser compatibility issues if generating webhelp.
    Sorry but time to get Rh11.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Does anyone know if versions and auto save work with microsoft office 08 in Lion? thanks

    does anyone know if version and auto save work on office 08 with lion?

    No, they don't.
    Autosave and Versions are specific technologies that the developer must enable in their programs. It is not handled purely by the OS.
    I don't know how difficult it would be to implement, but I doubt they would update 2008 to use them. Maybe 2011.

  • Does anyone know if Samsung Registered DIMMS will work?

    I have an 2009 MB871LL/A.  Do anyone know if Samsung M393B2G70AH0-YH9Q5 16GB DDR3 ECC Registered DIMMS will work?  I am running Hauptwerk virtual pipe organ software and some of the sample sets require 48-64GB of real memory to load.
    Tom Langley
    <Re-Titled By Host>

    Is this the model build year series of Mac Pro you have? (early, mid, or late 2009)
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-core-2.66-early -2009-nehalem-specs.html
    The specifications change over various build year models, so to 'identify your computer by serial number' is also very helpful... http://www.powerbookmedic.com/identify-mac-serial.php
    Then one could attempt to match RAM specification and compare products. Also, there is a page at OWC where you can cross-reference RAM, that also depends on the build model year series information.
    I will ask the host to move your post to the Mac Pro (desktop computer area) because it is not a MacBook.
    Good luck & happy computing!

  • Does anyone know how to make WireTap Studio work with Lion?

    I installed Lion in August, but I have been so busy that I haven't tried to use some of my applications with it until now. One of my favourite sotware suites, Wire Tap Studio, does not seem to be compatible with Lion. This is more than disappointing; it is such a disappointment that I am prepared to ditch Lion and go back to Snow Leopard, if I knew how. Has anyone had a similar experience, and is there a solution?

    I am a bit late to the party . Just discovered that wiretap studio no  longer works..Ive regularly  upgraded the OS and recently  I upgraded to  Yosemite and its the first time  I've had this issue.
    I cant wiretap other than  via a mic  which results in crappy  sound. Apparently Ambrosia are not going to  make a fix..
    Anyone   know of an alternative that can capture sound internally without the  use of a mic the way  wiretop  did.   Ive looked at  MixPAd... It doesnt capture internal sound as far as I can see   and Onedesof Audio recorder   came with a Firefox  Warning about  possible corruption  or tampering .
    I want to capture  good quality sound so I can study the arrangements  without  background  noise filtering  in  via  a  mic.

  • Dose anyone know of a driver that will work with OS 10.8 and imageRUNNER 1025iF?

    No driver available from Canon. Is there a work around or a generic driver out there that will work?

    The Canon UFR2 v2.41 driver for 10.7 that was released last month also works fine on 10.8.
    This driver is for UK English regions where your model is known as the iR1024iF. If you want to check the Canon USA web site for the US English version of the UFR2 v2.41 driver then you should get the correct model name.

  • Does anyone know if ICloud is going to work with 64 bit computers?

    Mobile Me did not work with the new I7/64 bit computers. they would not sync. I'm wondering if ICloud is going to work with 64 bit comptuers?

    No one knows any more than has been announced.
    You can read and watch it all here.
    http://www.apple.com/

  • Does anyone know when Siri location services will work in the UK?

    I really like the iP4S, and perhaps moving to it from a Blackberry.
    However, one of the key features of the 4S is Siri and the last time I checked, it didn't have the "there is a pizza place within 5 miles from you" type service.
    I know it's in beta, so that is why.
    But I was wondering if anyone knew when it would begin to be released in the UK.  I know it won't be released with ALL services available, but be good to know when it will begin to be available.
    That said, I would wish Apple had genuine Push on all accounts.  I don't know if it ever will, but that on it's own is drawing me away from iPhone and sticking wiht my BB.

    Apple's faq on Siri suggests that WW locations will roll out during 2012 .
    I suspect it will have to exit Beta before anything else happens
    http://www.apple.com/iphone/features/siri-faq.html

  • Does anyone know a USB WIFI connection that works with the Intel Powerbook and OS 10.7.5

    I have replaced my AIRPORT EXTREME card because it dropped connection and wouldn't turn back on.
    It worked fine for 14 months, but now it is broken again.
    I have given up.
    I would rather replace a 20-30 dongle everytime rather than the airportexpress card.

    that should say a $20-$30 dongle.

  • Does anyone know if the Nike+iPod kit works with the new 2G Nano?

    The reason I ask is that Gizmodo says the bottom dock attachment is offset on the 2G Nano.

    I can confirm that you have a good ipod nano with a "bad" firmware.
    EACH TIME I use my 2Gb ipod with the sport kit it freezes ! Without sport kit..no problem at all !
    My ipod nano with firmware 1.1.1. freezes when:
    - I press the end session button after a long session (in this case it maintains the training also after the reset). with short sessions..no problem.
    - If I forget to not set the hold button during session, the armband "press" without control some combination of buttons which freezes the ipod (session lost after reset)
    - If I press /<< button instead of menu to return to the previous screen at the end of the session. (session lost after reset)
    - Without receiver inserted I have pressed to activate sport kit - ipod require the receiver - I have pressed to return to the previous screen and ipod freezes.
    Why Apple doesn't insert a "timerized autosave data sessions" to avoid to loose sessions in case of freezing and reset ?
    Best Regards

  • I used mactheripper to rip my DVDs so I could store them on my mac.  However since upgrading to lion x os mactheripper doesn't work. Does anyone know of a free alternative that works on lion x os?  Thanks

    I used mactheripper to rid my DVDs so I could store them on my mac.  Since upgrading to lion x os mactheripper doesn't work.  Does anyone know of a free alternative that works with lion x os?  Thanks

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Does anyone know why my i pod will sync music but not pod casts or audio book (it used to)

    does anyone know why my i pod will no longer sync podcasts or audio books when i still have memory left and it will sync music still???

    Both Podcasts and audiobooks are synced using a separate tick box from the music. So, connect your iPod to iTunes and check the Device/Podcasts (and Books for the audiobooks) and make sure that the relevant box is ticked to enable syncing.
    If you need to change the setting (that is, if you need to put the tick back on), you should perform a sync afterwards to make sure the change has been updated onto the iPod.

  • Does anyone know if my G3S Iphone will sync Itunes on my MAC Power PC G4, OSI0.4.11?  If it will, what operting system does the Iphone need?

    Does anyone know if my G3S Iphone will sync Itunes on my MAC Power PC G4, OSI0.4.11?  If it will, what operting system does the Iphone need?

    My apologies, I read your post the wrong way. I see now that the original poster was confused about the specs and you were simply responding with the appropriate info.
    I've gotten defensive after reading the forums. The forums are full of posters just looking to prove someone wrong or stupid, rather than being helpful. I shouldn't have assumed you were one of those people. Sorry.
    I did my homework and discovered that my PowerPC will run Leopard. It can be purchased for $129 by calling 1-800-MY-APPLE. This is much cheaper than replacing my laptop.
    I hope to upgrade my Mac soon, though! Can't believe this thing is still ticking. I love Apple.

Maybe you are looking for

  • Reg Third party order processing.

    Hi Gurus, Please help me on the following questions. 1. In third party order processing how costing is updated? 2. How automatic purchase requisition will be generated in third party order processing? 3. Explain about Third party returns process step

  • Can I move all my drives from my 1,1 to a 4,1

    Hi, I would like to benefit from a newer, faster mac pro, and I'm considering buying a 4,1 8 core 2.66GHz. I currently use a 1,1 Quad core 2.66 with Digital Performer and a lot of Virtual Instruments and experience crashes and slowdowns galore. To av

  • Button click, leaving projector focus and frozen interactivity

    Hello all, I'm am attempting to reword my problem (posted in another post) so as to facilitate getting assistance. Scenario: A button with a mouseover effect attached via a behavior script with the following code -- code that changes the background i

  • The system is inconsistent Error for installation

    Hi Experts, I am trying to install SAP Netweavwer Sneak Preview ERROR 2005-08-02 MDB-070057 The system is inconsistent. Registry or SAP_DBTech information is available, but software is not complete. What is this error? Please Help!! Its Uegent!!! Tha

  • HELP NEEDED: Use a new record for a customized table as a workflow trigger

    Hi SAP Workflow Gurus, Good day! One of our requirements is to have the creation of a new record in a custom database table trigger a workflow. I read and followed the steps as indicated in this link http://www.****************/Tutorials/Workflow/Tab