Does anyone know the difference between KT2 Combo and K7N2G?

I bought a KT2 combo (ms-6764) because my ms-6341 went bad,and msi sent me a k7n2g (ms-6341 v.1.1). Does anyone know which has more or better features? Thanks much

KT2 Combo-L: VIAs KT266A Chipset onboard, SDR DIMM and DDR DIMM support, low price board, FSB266 support
K7N2G: nVidias nForce2 IGP MCP Chipset onboard, high performance Chipset, FSB333 support, graphics onboard (comparable to the GF4 MX, if Dual Channel is used), Dual Channel DDR400 support
The K7N2G is way better, than the KT2 Combo-L. But see yourself:
KT2 Combo-L: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=408
K7N2G: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=398
greetz sj

Similar Messages

Does anyone know the difference between the Applecare Warranty for the Macbook Pro and the Applecare Protection Plan Auto Enroll 607-8192-B APP FOR MacBook

Does anyone know the difference between the Applecare Warranty for the Macbook Pro and the Applecare Protection Plan Auto Enroll 607-8192-B APP FOR MacBook

AFAIK, the difference is that the auto-enroll occurs automatically when you purchase the device and you will have to disburse the cost right there and then. Whereas the other comes in a box, can be purchased separately later and you must manually enroll your device into the system to activate the additional protection. This must occur before the base one year warranty is over.
So, if you don't want to pay up at the moment you buy the computer, you can wait up to say 11 months and buy the AppleCare warranty extension later. Just be sure to complete the enrollment BEFORE the base warranty is over, else Apple will not honor the extension (all in the fine print). This applies to all devices that offer an AppleCare option: notebooks, desktops, iStuff, etc.

Does anybody know the difference between extractors 0FI_GL_4 and 0FI_GL_10?

BW experts: I have to extract GL data into BW, and I was assuming I would use 0FI_GL_4 datasource. However, I began looking around and see now 0FI_GL_10. I am not knowledgable on the finance side at all in SAP, so I don't know which extractor makes sense to use. Does anybody know what the difference is between these two extractors.
Kind Regards,
Chris

these two datasources are different from each other.
If you are still using the old GL - you need to use 0FI_GL_4
If you are still using the NEW GL - you need to use 0FI_GL_10
And one more thing to keep in mind id 4 extractor is meant for line items and 10 is for totals. And there is no std line item DS for NEW GL. You need to create ur own.

Does anyone know the difference between cme-153-3Mv1.rar and cme-153-3Mv2.rar?

Doing a new installation of CME 10 and there are two files with no description or help on Cisco's download page. They were released on the same day and are the same size.
Anyone have any idea?

Here are release notes for 15.3.3M IOS, as you can see there is only one new feature in M2 from M1, everything else as expected is bug fixes:
http://www.cisco.com/c/en/us/td/docs/ios/15_3m_and_t/release/notes/15_3m_and_t/153-3MNEWF.html
HTH,
Chris

Does Anybody know the difference between M9088G/A and M9089G/A?

I have iMac G4 17" Flat Screen(800Mhz).
I want to add more memory in it.
Apple has two part number for 512MB PC133 144PIN module.
One is M9088G/A the other one is M9089G/A.
I am wondering whether both are compatible or not.
iMac G4 17" Flat Screen(800MHz) Mac OS X (10.4.6)

Welcome to the discussions!
Do yourself a huge favor and take a look at OWC where that same RAM is almost half the price.
Apple does not make RAM and they seriously overcharge for it. OWC guarantees their RAM is Mac compatible and have a lifetime replacement warrantee.

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

I want to know the difference between Days column and Day1 Column

Hi All,
I used this query:
SELECT to_char(return_date_time,'dd/mon/yyyy hh24:mi:ss') Test,
DECODE ('I', 'I', DECODE (1, NULL, NULL, 0, NULL, SYSDATE + 1)) Days,
DECODE ('I', 'I', SYSDATE + 1) Day1
FROM fm_curr_locn
WHERE patient_id = 'DU00002765'
output:
Test
Days
Day1
26/oct/2013 00:00:00
26-OCT-13
10/26/2013 3:06:59 PM
I want to know the difference between Days column and Day1 column and why the days column didnt show the time
Please anyone help.....
Regards
Shagar M

Pleiadian wrote:
It is the decode statement that is doing this.
The format of decode is:
decode(expression, search1, result1, search2, result2, searchn, resultn, default)
All result fields must be of the same datatype and will be of the datatype of the first result (result1 in this example)
In your example (the decode for the field Days) the first result is a NULL. I suspect (gurus? anyone?) that Oracle will use the varchar2 overload of the decode statement, and the date field will be converted to varchar2 using your NLS_DATE_FORMAT settings.
In the second decode statment (Day1) the first result is of datatype date, so the result of the decode statement will be a date field (and will be parsed as such by your sql development tool)
I agree, as NULL is the first result returned the datatype is undetermined, so Oracle is picking VARCHAR2 over others, and causing an implicit datatype conversion on the resultant date value, whereas the other which is returned as a date will use the local settings of the client tool being used.
I can replicate the 'issue' in Toad, and it's rectified if we cast the first returned value of the decode statement...
SELECT DECODE ('I', 'I', DECODE (1, NULL, CAST(NULL AS DATE), 0, NULL, SYSDATE + 1)) Days,
DECODE ('I', 'I', SYSDATE + 1) Day1
FROM dual

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

What's the difference between client combo and server combo? Also, what would happen if I install both?

what's the difference between client combo and server combo? Also, what would happen if I install both?

One is for the base version of the Mac OS, the other is for the Server version. You can only install the one that matches your system.

I need to know the difference between planned SKF and Actual SKF from business view and when I can use one of them ?

I need just to know the difference between plan SKF and Actual SKF in business example and when I use one of them.
thanks

Hi Salaam,
Statistical Key Figure (SKF) is a base to allocate the cost between cost centers. Usually, common cost centers cost should allocate to respective department cost centers on monthly basis.
Some of SKFs are: Calculating floor rent on SFT, Telephone charges on No. of units, and employees head count is with "Each" in SAP.
Apart from Ajay's reply, you can consider the Canteen exp in an organization. Assume Admin, Fin and Mfg departments are getting food services from Canteen. Here, total monthly cost of Canteen exp should be allocated to respective departments. Here, we use SKF as total head count of each department and distribute the cost.
Planned SKF is what you planned on the beginning of a period. (Assume head count was planned as 30 in the month beginning)
Actual SKF is what exactly you consumed over the period. (Actual employees provided canteen services during the month is 25)
BR, Srinivas Salpala

Does anyone know the difference btn the following statements?

Hello,
Do you know the difference btn the folllowing two statements?
ROUND(IFNULL("Fact - Project Budget"."Current Budget Cost",0), 2)
ifnull("Fact - Purchase Order"."ABC VTX Estimated Tax",0)
I am still new to the business: so if one statement is: ,0) and the other is: ,0) 2) what is major difference among them?
will appreciate your help

ROUND(IFNULL("Fact - Project Budget"."Current Budget Cost",0), 2)If "Fact - Project Budget"."Current Budget Cost" is null then setting to 0 value and then rounding for 2 positions
Rounds a numerical expression to n digits of precision.
Example
This example returns 2.17 as the result.
ROUND(2.166000, 2)
http://www.cool-bi.com/
Edited by: Srini VEERAVALLI on May 6, 2013 11:23 AM

I am wanting to buy and Ipad.. but I would like to know the difference between having wifi and a simcard..if someone could explain this to me.. and the benefits of both I would appreciate it.

Good Morning:
I have been looking at the Ipads for a while now. I have some concerns though. First, I am NOT a techy of any kind!! So my question is; What is the difference between wifi and a simcard(?) What I understand about wifi is...if you are in an area with free internet.. you can excess it. If not, then you can't. What is a simcard? Is this what you would use like a turbo stick..such as internet on the go... or is this a data plan for the Ipad, like I have for my phone? If so, I take it that it would mean a monthly bill of what or however I set it up... Please be kind with your responces.. I am a older person who wants a new gadget.
Thank you

Hi, Sarah,
You don't really compare a SIM card directly with WiFi. What a SIM card indicates is that a device is designed to connect to cellphone service, in the case of an iPad a data-only service for connection to the Internet. The SIM card works with a technology called GSM (don't worry about what that means); the SIM card is just how the iPad is identified to the cell carrier (in the US, that would be AT&T).
Your choices of connecting an iPad to the Internet are therefore:
WiFi - wireless network connection which uses a device referred to as a "hotspot" or "access point" (and sometimes a "wireless router") with an Internet service provided by some other company. You may have this at home, with your own WiFi router and Internet service, or it may be found by some other location, such as a coffee shop. Cost of WiFi at home would only be the cost of the router and the fee you pay to your Internet provider. Other locations may or many not involve a cost. The advantage of a WiFi connection is speed (compared to a cellular data service) and cost (no monthly fee other than your Internet provider). The disadvantage is that you have to be in range of a WiFi service; that range is usually on the order of 100 feet or so.
Cellular - this is a service provide by a cellphone carrier. This allows you to have your iPad connected to the Internet wherever the carrier offers service, which may be in buildings, parks, while driving, etc. just as with a cellphone. You pay a monthly fee to the cell carrier for this service. The advange is of course that it's available in many places. The primary disadvantages are the monthly cost and slower speed in the connection to the Internet.
You can have both with an iPad if you purchase your iPad with both systems included; iPads are sold WiFi-only or WiFi+3G ("3G" refers to being capable of connecting to a cell network) You are not obligated to sign up with a cell carrier if you buy the iPad with that technology; most carriers allow you to sign up month-by-month, and in some countries the carrier has a pay-as-you-go service. If you tell us what country you're in, someone can tell you more about the available cell plans, if you're interested.
I hope this helps. Feel free to post back if you need further clarification or have additional questions.
Regards.

Anyone knows the difference between this Protocol Encryption status or why there status are different?

I am confused why there Protocol Encryption Status are different from each other they are all using AnyConnect client v2.5.
user 1 - AnyConnect-Parent SSL-Tunnel RC4
user 2 - AnyConnect-Parent SSL-Tunnel DTLS-Tunnel RC4 AES128
user 3 - Clientless SSL-Tunnel DTLS-Tunnel (this user is using an AnyConnect client, but when she connects her status show Clientless)

The 17" MBP has an extra USB 2.0 port and also comes with a FireWire 800 port.
As far as the GPUs go, they are the same: ATi Mobility Radeon X1600.
As far as the GPU-dedicated-RAM (VRAM) goes, the only difference is the amount (128MB vs 256MB). More VRAM is better if you are going to be running video intensive apps, eg. multimedia apps and/or 3D games. The VRAM is GDDR3 which provides greater bandwidth than the DDR2 technology used in the 512MB/1GB/2GB of 'main memory'.
There is, of course, the different CPU multipliers. The 1.83GHz has an 11x multiplier while the 2.00GHz has a 12x multiplier. The 2.16GHz CPU of the 17" MBP has a 13x CPU multiplier.
The Front Side Bus speed is the same 667MHz on all three models. It drops down to 167MHz at the boundary of the CPU to which is applied the above multipliers, ie:
667MHz FSB / 4 = 167MHz
167MHz x 11 = 1.83GHz
167MHz x 12 = 2.00GHz
167MHz x 13 = 2.16GHz
N.B. 167MHz is really 1000/6.

I'd like to know the difference between Flat view and Threaded view in the forum.

anyonw know?
discussion view style and comment view style
any difference? i have not noticed any

threaded view will not display posts which are replys to other posts in the main view
only when you click on the original post will you see them

Need to know the difference between SRM workflow and Normal Ecc 6.0 Worflow

Hi All,
I have worked on Ecc 6.0 worflow, just wanted to know how is SRM workflow going to be different than the ECC6.0 worflows.
Incase if someone can suggest some links for tutorials for SRM workflow basics.
Thanks to all in advance.
Anu.

Hi
In addition to Masa
For every business object we do have one or more work flow templates are available.
In SRM , you can approve via web browsers . very user friendly screens
br
muthu

Does anyone know the difference between KT2 Combo and K7N2G?

Similar Messages

Maybe you are looking for