Does anyone know the iso range on the video camera / still camera?
I'm shopping around for camera's right now, my budget is very limited, and though I suspect almost any camera will have better low-light detection than the iphone 4 (not 4S), I don't know that for sure, because I can't find the iso range in the tech specs, and as we all know, Apple hardware can be surprisingly good. So, does anyone know the iso range for the iphone 4 (not 4S) ?
Set the pixel aspect ratio in Live Type: Edit > Project Properties. It needs to be at 1:42.
When you bring the file into FCP, right click it in the browser, choose Format and click next to Anamorphic to place a check mark next to it:
Similar Messages
-
Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?
You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.
-
Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!
Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail.
-
i just upgraded from snow leopard v10.6.8 to os x mountain lion and my scroll bar has disappeared on all my applications on the internet. does anyone know a patch to get the scroll bar to work.
Open General preferences in System Preferences. You can set the desired scrollbar behavior there.
-
Does anyone know how to turn off the pop-up iCloud log-in window on iPhone 5c. I have no desire to use iCloud. I have turned off iCloud in settings but that does not seem to deter the pesky little pop-up from continually asking me to log-in
ThanksPop up usually meant that icloud activation lock is still on on Apple servers. In order to deactivate you need to turn icloud back on by signing in and then sign out properly. For your sake I hope that you know the password.
-
I have an older MacBook pro--does anyone know if I can download the new OS X Mountain Lion
Does anyone know if I can download the OS X Mountain Lion?
You can do your research:
http://www.apple.com/osx/specs/ -
Does anyone know how i can get the older versions of the ipod software
Does anyone know how i can get the older versions of the ipod software on my nano because my nano had a feature that when i held down the menu button for a couple of seconds, the backlight turned on.......well ever since i downloaded the most recent software, everytime i hold down the menu button, it goes directly to the menu(which im not very enthusiastic about). Can anyone please help me if you can? I appreciate your help=)
i agree with you 100%, i really want that feature back! it was so useful being able to turn the backlight on and off whenever i wanted. unfortunately im in the same boat as you are as i dont know how to get the old software
-
Does anyone know why or what is the reason when starting a new iMac with Lion, sometimes a gray bar appears under the Apple that begins to shade to dark as it loads OS? It does this on occasion. One time the system loaded was VERY slow and terrible colors. Pulled the plug, re-started the computer and it did not do this. As I say, its only on occasion, not every time. I noticed in the discussion page there were problems listed for 10.6 nothing for Lion.
Please advise, if possible.You should see this 4 option menu. Click on Disk Utility:
In Disk Utility, Select FIRST AID and then VERIFY and then REPAIR the disk.
Ciao. -
Does anyone know if I can change the font on Word to 13? When I highlight the text and type in 13 it automaticall reverts back to 12. I have a MacBook Air.
hit command + A to highight all text, type in 13 in the font size box.
-
Hi, I've lost my Mac password to allow my Mac to install new software like Maverick OS. Does anyone know how I can reset the password please, so I can allow updates? Thanks.
Help here > Reset the user password in OS X Lion, Mountain Lion and Mavericks: Apple Support Communities
-
Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.
Hi there AnthPy,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W. -
hello does anyone knows how to re-enter the decimals for the tempo cause i only have a full number and can't enter a decimal number ?
Hi
Go to Preferences:Display and check that you have:
HTH
CCT -
Does anyone know where I can get the newsletter templates?
Does anyone know where I can get the newsletter templates?
Aside from the ones provided in email marketing setup process, a simple search search online should give you many more- including responsive ones.
Here's one of my favorite sources: https://github.com/mailchimp/Email-Blueprints -
does anyone know, if I can place the footnote text in another textframe without losing the cross references?
Bleib sachlich Django, deine persönliche Meinung interessiert nicht. Wenn du nix zu sagen hast, dann bitte raushalten.
Von meinem Windows Phone gesendet
Maybe you are looking for
-
Hi experts, I have two Fact Tables F1 and F2 and both having the join with Dimensions D1,D2. when i pick the data from D1,D2 and measure from F2 and F1 then the report is runnug fine. but when i pick data from D1,D2 and some character from F2 and mea
-
Hi, I am using tabstrip scrolling in application server. i am using 3 tabs(3 subscreens). But When i am using module exit at-exit command. That module is not working. So if Click on exit button.it's checking all the validations then only exit
-
I have Microsoft Office Professional Plus 2010. I've had issues with a problem in outlook where file was being generated in my PST folders everytime I opened outlook. I read where I should disable Norton Anti-Spam and it worked to allow me to delete
-
BDLS : Table T000 was not relevant for conversion
Hello, After a system refresh ( homogeneous system copy in ECC6), we performed the post copy procedure. I ran the BDLS transaction, all the tables were converted fine, exept the table 000. I still have in transaction SCC4 the former logical systeank
-
Page navigation using adf-config not working
Hi, JDeveloper : 11.1.1.17 I created a WebCenter Framework Portal application. 1. Created a new page under "oracle\webcenter\portalapp\pages" by name Page1. 2. Dragged both "home" and the new page "Page1" and dropped into the adf-config. 3. Created a