Does anyone know the max. Amps the iMac draws?

does anyone? sure probably. All I know is what's on the tech specs page http://www.apple.com/imac/specs.html
Electrical and Operating Requirements
Line voltage: 100-240V AC
Frequency: 50Hz to 60Hz, single phase
Maximum continuous power: 205W (21.5-inch models); 310W (27-inch models)
Operating temperature: 50° to 95° F (10° to 35° C)
Storage temperature: -4° to 116° F (-20° to 47° C)
Relative humidity: 5% to 95% noncondensing
Maximum altitude: 10,000 feet
Typical acoustical performance Sound pressure level (operator position): 18 dBA at idle4
-mvimp

Similar Messages

Does anyone know the default size for 24 in. imac display?

I inadverently changed the display size on my 24 inch imac. The font in the toolbar at the top of the desktop is larger than I want. Also, when I open windows in different applications, they open larger than the display and have to be downsized in order to see the entire window.
Does anyone know the default size for this display? Or is there a different way to fix my issues?
thanks in advance.

Hi Napamike2: The default setting for the 24" is 1920X1200. If that doesn't get you back to the proper display, maybe you have accidentally activated "Zoom". To check go to System Preferences, Universal Access. Check that Zoom is turned off.
Stedman

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

Does anyone know the accurate dimensions of iMac 21.5" shipping box (late 2012 - the "razzor"model)?

Does anyone know the accurate dimensions of iMac 21.5" shipping box (late 2012 - the "razzor"model)?
Note that I am looking for the BOX (packaging) measures, not the computer measures.
Hard to find that on th einternet.
Thanks!
Mott

Mott,
I'd recommend going to your local Apple Store or reseller and ask to measure a box.

HT3500 My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now th printer cannot be found when TimeMachine back ups are taking place. Does anyone know the cause & remedy please?

My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running. Does anyone know the cause & remedy please?

Your points match mine pretty well,though here are some thoughts:
1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
4. That matches my experience.
My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Hi does anyone know the cost of having my HD replaced by Apple. I have iMac 2009 with 500gb HD and its 21.5

DOes anyone know the cost of having my HD replaced by Apple, can not get any idea of cost anywhere. I rang Apple Belfast who didn't know they put me through to tech support and he didn't know either. My iMac is 21.5 2009 with 500gb. I would just like some idea before I take it up to them. It's almost certain that the HD is fried can not boot to external can not get off white screen by doing all Apples checks for white screen. So worse case is probably the HD and would like to know what I will be up for, if it is the worst case. I can supply more info if anyone can help . Pleaseeee

I have the same iMac as you but with a 1 TB hard drive.
Apple replaced the 1 TB hard drive of iMacs manufactured between October 2009 and July 2011 because of problems. When I took my iMac, the Genius gave me the bill (even if the repair was free) and the 1 TB hard drive cost about $100. This was with a 1 TB Seagate hard drive, so the cost for a 500 GB hard drive may be smaller, depending on the brand

IMac screen has been flickering, does anyone know the problem?, iMac screen has been flickering, does anyone know the problem?

Recently my iMac screen has started to flickering does anyone know the problem?
Any help appreciated

Bad power, unshielded speakers, improper hardware installs which lead to loose cables, can all cause this.

Does anyone know the status of the new CMYK monitor display Apple is developing?

Does anyone know the status of the new CMYK monitor display Apple is developing?

I have the same iMac as you but with a 1 TB hard drive.
Apple replaced the 1 TB hard drive of iMacs manufactured between October 2009 and July 2011 because of problems. When I took my iMac, the Genius gave me the bill (even if the repair was free) and the 1 TB hard drive cost about $100. This was with a 1 TB Seagate hard drive, so the cost for a 500 GB hard drive may be smaller, depending on the brand

Does anyone know the sys file path to Apple Mail draft-emails folder?

Does anyone know the system file path to Apple Mail draft-emails folder?
I want to stuff a bunch of files into that folder and have them appear in Apple Mail.
Thanks

I think the problem is the fact that the emails are on a PPC G5 and in a completely different format that your main iMac (you're on Lion?). There is even a problem between SL and Lion; I just spent hours dragging individual mailboxes from a Lion machine to an SL machine. They wound up in the Import section. And, I just tried it: after you manually put the mailboxes in the appropriate spot and you've rebuilt each mailbox once it appears in Mail, I was able to drag an email from an Import mailbox to my Inbox. But, as I said that was between SL and Lion; don't know if that would work with 10.4 (?) and Lion.

Does anyone know the Power Inverter Board p/n?

Does anyone know the Power Inverter Board p/n for the iSight 1.9Ghz iMac? I understand there are several but knowing me, I'd buy the wrong one.

If you commonly like to read posts on a certain subject you can store a query link in your browser to more quickly find specific posts. For example I have the following link bookmarked in my browser.
http://forums.ni.com/ni/search?submitted=true&type=message&q=FPGA&days=7&page_size=10
The advanced search page allows you to define your own search which you can then bookmark.
http://forums.ni.com/ni/search?advanced=true
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Does anyone know the power cord part for HP A532 printer? I need a replacement cord. THANKS!

Here's the steps to follow if your printer isn't turning on.
If you've gone through all those steps and you still don't have power, there are a lot of places that sell a replacement cord and supply for that printer.
I am an HP employee.

Does anyone know the pricing structure for Digital Marketing Suite?

Does anyone know the pricing structure for Digital Marketing Suite? I asked for info but no one ever got back to me. I don't want to waste anyones time if it's too expensive so I'd like to know up front what the fees/package rates are.
Thanks.
Peter Marino
Owner of an
SEO Comapny in NYC

This is the top story at this writing at AppleInsider:
Like the updated mid-2014 13-inch MacBook Pro with Retina display, Apple's latest 15-inch notebook brings slightly speedier Intel processors. But with memory, graphics and design all carried over from last year, the most substantial change is a $100 price cut.
http://appleinsider.com/articles/14/09/07/review-apples-mid-2014-15-inch-macbook -pro-with-retina-display

Does anyone know the file name of the root ($)?

RoboSource Control unfortunately is not working correctly and a Rollback caused many topics to be permanently deleted. I'm waiting for approval from IT to get the 8.0.1 and 8.0.2 patches applied, but in the mean time we would like to restore our project from server tape backup. Only, I can't find out where the $ root is stored on the server to have it restored.
Does anyone know the name of the file that is the root? I was expecting to see a file called root or $, but can not locate a file named either.

Your DB Administrator should be able to recover a TSM backup OF YOUR ENTIRE DATABASE, not the project, from tape. The database object the DBA is retrieving will not have the $ (or the * sign). It will be named whatever you named the database when you created the database.
Your database name is located on the Connection screen.
Hope it helps...
Steve

Does anyone know the iso range on the video camera / still camera?

I'm shopping around for camera's right now, my budget is very limited, and though I suspect almost any camera will have better low-light detection than the iphone 4 (not 4S), I don't know that for sure, because I can't find the iso range in the tech specs, and as we all know, Apple hardware can be surprisingly good. So, does anyone know the iso range for the iphone 4 (not 4S) ?

Set the pixel aspect ratio in Live Type: Edit > Project Properties. It needs to be at 1:42.
When you bring the file into FCP, right click it in the browser, choose Format and click next to Anamorphic to place a check mark next to it:

Does anyone know the max. Amps the iMac draws?

Similar Messages

Maybe you are looking for