Does anyone know their way around the audio settings and audio cables?

I need some help setting up some audio settings for my Ps4 in a weird way. What I want to do is what CBarner89 does on twitch. If you havnt seen him stream from his Ps4 he has his decks hooked up to his stream directly channeling the audio in to the stream. I asked around on the stream about how to do it the only reply I've had is that I should plug the RCA connection from my decks in to my controller with the aux input. Howerever when I do this there is no option in the audio settings to set the input to come from my decks. But when I plug in a pair of headphones I have that also have a mic for answering calls the option to set it my controller as an audio input is highlighted. And then I can set my controller as the main audio input.  I noticed that on the RCA cables I have for my decks have 2 black lines on the actual gold part that you insert and my headphones that have a mic has 3 black lines is this something to do with it?

Unfortunately I could get neither of these to work, probably because of my own ineptitude.
I couldn't get VLC to output from Spotify, this could be my own fault.
I also couldn't make Airplay play with OS X 10.3.9.
I did however find a messy workaround.
I am currently using Airfoil on my main Desktop to output Spotify and then am receiving it on Airfoil Speaker on my iPhone, which is in turn connected to my 10.3.9 iMacs audio input via a 3.5mm Jack.
You need to download an app called LineIn for 10.3 (http://www.rogueamoeba.com/legacy/) to play the sound from the input from the built in speakers.
To be fair it's not that messy it just requires you to have a device that can have Airfoil Speakers installed on it and have a 3.5mm Jack.

Similar Messages

  • Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections.  Does anyone know their way around this obstacle?  Thanks!

    Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections such as options.  Does anyone know their way around this obstacle?  Am I doing anything wrong?  Thanks

    Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
    But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
    Thanks for your helpfulness, anyway.
    And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

  • Does anyone know there way around the audio settings and audio cables?

    I need some help setting up some audio settings for my Ps4 in a weird way. What I want to do is what CBarner89 does on twitch. If you havnt seen him stream from his Ps4 he has his decks hooked up to his stream directly channeling the audio in to the stream. I asked around on the stream about how to do it the only reply I've had is that I should plug the RCA connection from my decks in to my controller with the aux input. Howerever when I do this there is no option in the audio settings to set the input to come from my decks. But when I plug in a pair of headphones I have that also have a mic for answering calls the option to set it my controller as an audio input is highlighted. And then I can set my controller as the main audio input.  I noticed that on the RCA cables I have for my decks have 2 black lines on the actual gold part that you insert and my headphones that have a mic has 3 black lines is this something to do with it?

    Yes this is pretty rubbish, I have a presentation that we use to run the whole of an 'Oscars' like ceremony for our company which is attended by over 200 branches and hundreds of people, we use animated backgrounds which loop and look really professional, but due to lag and pauses while the next slide loads we have layered these one on top of another in a single master slide, after the first fixed animation runs it fade mixes through to the looping slide beneath it which looks great and means there is no lag in music or movie animation.
    Now that they have removed animation from the master slides this doesn't work any more so we have had to restore back to the old version of keynote and all works like a dream again, how silly is it when upgrades end up as downgrades!
    Thank goodness I had plenty of backups or this would have been a disaster as our conference apporaches in March!

  • Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K  minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?

    Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K  minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?

    Read this
    iOS: Unable to update or restore

  • Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    This question has already been addressed in this thread:
    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
    John M
    National Instruments

  • Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Hello,
    Exactly which USB device are you referring to? Is the device a NI product?
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
    Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
    Swapnil P.
    National Instruments Engineer

  • Does anyone know a way to modify "Default Settings" printer preset?

    I use enough different presets that I find that the "Last Used" preset for printing if often what not what I really want.
    (Background: I save a number of different profiles for different types of print jobs, so that I can select "Color Production" as a preset, for example, and get a number of printer settings configured as once, like Color Settings, Quality, Color, and duplexing.  These are set and selected using the "Presets" picker in the Print dialog box.  One can use the picker to save and view settings as well.)
    Am I correct in that there doesn't seem to be a way to change the "Default Settings" preset?  The "Show Presets" pick in Presets doesn't offer the ability to change the presets, and the "Default Settings" preset can't be deleted here, unlike the user set presets; it also isn't possible to save a preset as "Default Settings".
    Ideally, changing the default would let me check the box to always use the default (as default), but this way I would have my own defaults.  Just wondering whether I'm missing something obvious - I've tried the modifier keys trick clicking on things, and also the CUPS subsystem at localhost:631.

    jptrovato wrote:
    Does anyone know a way to make a Dell 3110cn Color Laser Printer fully compatible with a Mac operating system?
    Go to the dell support site and download and install the most current drivers for your pring and operating system.

  • Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

    Hi,
    Can someone help.
    I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
    Also I intend to extend it with Airport Extreme.
    Please help.
    Thank you.

    Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
    This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
    Is that really what you want to do?
    If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
    Please start another post to tell us exactly.......
    What device will be the main router providing your Internet connection and wireless network
    What device will extend the network
    What operating system that you have on your Mac or PC

  • Does anyone know a way to replicate the SAPSID adm user ?

    We are trying to consult to one of our clients that using SAP/r3 with Oracle 10.2 DB.
    The client has a team of 4 DBAs, and the entire team members are using the username <SAPSID>adm in order to login to the DB and conduct changes and other operations.
    We believe this is the wrong way to handle the login authorizations, and we think that each DBA has to have his own user name in order to enable audit trail. The client's IT team manager claims they don't know how to create personal user names with the authorization level of the <SAPSID>adm, and they must use this user name for their needs and operations.
    Does anyone know a way to replicate the <SAPSID>adm user authorizations to some other DB admin user name so they will enable audit trail for each team member?

    Hello,
    You can create any number of users have authorizations similar to sidadm user but I don't think it will serve the purpose because of the way the things are designed to be maintained in SAP.
    However, you can utilize an alternative. Create individual OS IDs for each person who has to log on to OS. Assign 'sudo' access to these individual IDs to logon to 'sidadm' and 'orasid'.
    Thanks

  • My movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    I would use Quicktime Pro.
    See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
    To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923  (Quicktime 7.6.6 is the latest version.)
    To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html

  • HT1711 When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?

    When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?

    I have a similar problem with at least two songs that I know of, one is an iTunes download (encrypted) the other was imported from a CD using iTunes (no encryption). Both songs play 2-3 seconds then immediately go to the next song. The "weird" thing -- I plugged my iPod into my new MacBook which has no songs other than what are on my iPod (i.e., not playing the song from another source) and both songs play fine. Unplug the iPod from the computer, plug in headphones and the songs skip again.
    I've gone through the 5 R's as well, with no luck.

  • Does anyone know a way to reference values in cells from separate sheets?

    Does anyone know a way to reference values in cells from separate sheets?

    I had not used the iCould version.  I just fired it up. So far I don't know how to click to make a reference to another sheet but the syntax for sheet and table names when typing them in is a little different.  If there is a space character in the name, you have to put single quotes around the name.
    ='Sheet 1'::'Table 1'::B1

  • I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

    I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

    Do the following:
    Make sure you are signed into iMessage and FaceTime with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone).

  • I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

    If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
    I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

    The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
    If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
    Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
    Allan

  • Does anyone know how to clear the fields between uses of a form used in Adobe Reader on an iPhone?

    The iPhone app for Adobe Reader is automatically saving the form each time it is filled out.  (Windows Adobe Reader does not do this.)  This means that you have to manually clear each field before you can use the form again.  Does anyone know a work-around?
    Thanks,

    Hi,
    Please post your question to the Adobe Reader for iOS user forum:
    http://forums.adobe.com/community/adobe_reader_forums/ios
    Regards,
    Brian

Maybe you are looking for

  • Safari 5.1.2: Where is the built-in RSS Reader theme stored?

    Hi all, Safari's built-in RSS reader menus are displayed in wrong language on my system - does anybody know in which library Apple's blue RSS reader theme and/or it's ressources are stored, so I could check for missing language files? All hints I cou

  • My Page is flashing with parallax scrolling....

    I am having an issue that my page "flashes" when using parallax scrolling. you can find the page here: hursey.com/rlf it occurs at the bottome section of the page as you scroll down. Any thoughts as to the cuase or remedy for this would be much appre

  • Wear and tear

    hi is there any function module to calculate wear and tear for particular asset?

  • ColumnSeries fill color change fails

    Hi, I have a chart with column series that are populated dataprovider and for which the color is set in a separate CSS file. My software allows to dynamically change the CSS (compiled as SWF) and apply the changes. problem: - the first time the chart

  • Reg Number of plants to configure

    Hi all MM GURUS Currently we are into ROLL OUT project.  Actually here Cracker, HDPE, Utilties are the units in this plant. Client is asking to maintain these units as a separate plant . Is it advisable to go like that ?? Or same palnt is best? What