Does anyone know to fix the ringer on an iphone 3g after i changed my sims card it stoped ringin
plz help me i trryd everything
Check Settings, Sounds. Check the mute switch on the side of the phone.
While this picture is of an iPhone 4/4S, the mute switch is still the same.
Similar Messages
-
Does anyone know a fix for video being out of sync after publishing to Flash in Captivate 6?
I'm working in Captivate 6.0.2.325 on Mac OS 10.6.8. My Captivate file is just 10 slides, and 2 of them contain talking-head style video clips 30 - 40 seconds long.
Everything looks fine in Preview, but when I publish to Flash the video segments appear choppy and the audio is badly out of sync.
Also, I have one slide where the audio does not play after publishing, though it plays in Preview. It's a widget slide.
I have tried the fixes suggested in this forum. My Preferences slider is slid all the way to retain slide quality etc. I've tried changing Flash versions and forcing re-publishing of slides. I've tried copying all my slides into a new file. No luck.
I have spent approximately 6 hours trying to resolve this problem and I'm about at the end of my rope, so any suggestions will be much appreciated! I will have to insert LOTS more video segments to complete this project.
Thank you!Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid") -
i hate my new blackberry 9360 it never gave me a days hassle and i want to use it for the remainder of my contract as the 9360 is just a pain and full of problems and no matter what i do i cannot get an alternative phone despite the fact that i am a high spender with loyalty of over 10 years to my supplier. i do not want to use a fixed second hand phone. the reason we get a new phone is emphasis on new.
Solved!
Go to Solution.back to using a proper phone - please make some more blackberrys like the old 8900 as it is a sturdy, reliable phone.
so my paid for brand new but got second hand repaired 9360 will sit in a box for two years. -
When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.
I suspect that beautify doesn't touch CSS that it is not aware of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
Randy -
I cannot access my Hotmail account with Safari on my MacBookAir but I can access it on my Mac/Safari and also from my PCs. Has anyone experienced the same? Does anyone know a fix for this?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.
Background:
Using FrameMaker 7.1 to create a PDF file where a CS11 barcode file is embedded. PDF generates fine but we get a bunch of squares when we copy and paste the barcode data into Notepad.
We have CS 2 running on another PC and we don't get this problem. Do I need to install a plugin (if any) for CS11 to get this to work?
Thanks!Thanks for your feedback. I was not able to mention earlier that in my line of work, we use Notepad to check if the barcode text is written correctly or if the corresponding text can be found if searched in the PDF... We use FREE3OF9.TTF font when entering text values for the barcode (usually in document/part number format exclusive for our company's use) in AI CS11. After saving the AI file, we attach it in a document using FrameMaker 7.1, then a PDF file is created. The output PDF will be a certification sheet for our products. They (our clients) should be able to scan the document/part number out of the barcode. I'm sorry, I could not divulge any other information so I am not sure if this clears out the issue. It used to work before but I had to get my PC formatted and since then I have been encountering this problem. I am trying to figure out if we missed to install a component or something got messed up after re-installing Adobe Illustrator CS11.
-
Videoprt.sys is giving me high dpc latency. Does anyone know a fix?
Hiya. I am optimizing my windows-partition. Killing all unessecary drivers, services and processes goes a long way. Also due to sloppy coding in XP kernel, I need to set processes to idle priority, to avoid CPU2 stalling CPU1 when maxed. I have also set win32priorityseparation to 25, which is superficially similar to a low-latency linux-config I did.
However still, I have a module "Videoprt.sys" which reports 1.5ms DPC latency. (Using RATTv3) Dpc latency checker also reports DPC latency of 1.5ms. I see computers out there with 10uS DPC latency
Does anyone know a fix for this?
Peace Be With You.Fixed it needed to have a return null;
this is the code
if
(MonthjComboBox.getSelectedItem().equals("") ||
DayjComboBox.getSelectedItem().equals("") ||
YearjComboBox.getSelectedItem().equals("")){
return null; -
I updated from os 10.5 to snow leopard and my logic 8 crashes upon opening. Does anyone know any fixes? thanks
Logic 8 should have no problems in SL.
Use Software update to check if you've got the latest update for it (SU will only offer an update if it's not already installed).
Failing that, I'd start by uninstalling Logic and re-install from the DVD in case something got corrupted during the update. -
I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?
As you haven't told us who your email provider is, no.
There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through. -
Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase) I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Does anyone know how well the Intel Iris Pro installed on new 15" MacBook Pros performs using Photoshop and Lightroom? I have seen some differing opinions out there, and I would rather not shell out the extra cash for the Nvidia if I don't have to. I mostly do photo editing for business and personal use. I have not used the 3D function in Photoshop, but I would like to know that I could.
You could download a trial and see how well it works before committing to a subscription. You get 30 days to decide.
Photo editor | Download free Adobe Photoshop CC trial
Photo editor app | Download free Adobe Photoshop Lightroom 5 trial
Gene -
Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?
I agree with Grant. But to answer your question, that would be Word 2008. A quick search turns it up on sale at Amazon. You'll need to find it somewhere other than Microsoft itself, since MS stopped selling it when they released Word 2011.
http://www.amazon.com/Microsoft-Office-2008-Mac-Version/dp/B000WR2F2M -
I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4. Does anyone know if this will work for my iphone 5?
here is the link to Apples compatibility guide for it.
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit -
Does anyone know if loading the new OS will take care of a malware problem?
Does anyone know if loading the new OS will take care of a malware problem with Safari?
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
my macbook air fails to remember preferred WIFI network when it sleeps then reboots, anyone know a fix, the genius bar did a reinstall of the operating system without a fix
my macbook air fails to remember preferred WIFI network when it sleeps then reboots, anyone know a fix, the genius bar did a reinstall of the operating system without a fix
Maybe you are looking for
-
In SAP Script how to hard code my Company address in footer window
Hi All , In SAP Script how to hard code my Company address in footer window . Ex : in YB_F140_ACC_STAT this script i want to keep my company address, i want to hard coad , i dont want to use any field from table. Please give me step by step. Thanks S
-
Jsp:include not working - Please Help.
I am trying to do a jsp:include page but I must have the syntax wrong for the declaration of the filename. There shouldn't be a problem with my included file since it only has the word "TEST" in it. Both files are in the same directory. The error I'm
-
I have Dreamweaver CS5.5 and all of a sudden I can't open it says XML parsing fatel error. Invalid Document Structure What do I do? Thanks
-
G/L and vendor (FBL1N/FBL3N) account line item display
Dear all, Do anyone of you know what event in which program calls the "display document" function within the "environment" menu from FBL1N or FBL3N transaction? Regards.
-
Dreamweaver MX 6.1 Closes When Click on Help or Commands in Vista
Just got a new machine - running Vista with Dreamweaver MX 6.1. When I click on the Toolbar - on Commands or Help - it closes the program. I just installed the updater to make it 6.1 - but it didn't help. Any ideas? Jess