Does anyone know what happened to this Setting?

Setting>Spaces>Medium Spaces>Indoor Spaces>1.9s Jazz Club. 
I've used it on other songs of mine, but now it's gone (along with a bunch of other settings.)
Thanks!

Hey Hey Thanks a lot!:) I was so frusterated with the problem that I didn't even look there..LOL! Thanks again.

Similar Messages

  • I have a MacBook running OS X v10.6.8 and I'm trying to upgrade to Mouton Lion but I can"t download it from the app store. It says I need a intel core duo which i have. does anyone know whats happening here?

    I have a MacBook running OS X v10.6.8 and I'm trying to upgrade to Mouton Lion but I can"t download it from the app store. It says I need a intel core duo which i have. does anyone know whats happening here?

    Check that your computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    If your computer isn't compatible, you might be able to upgrade to Lion. 
    Computer Compatibility - Lion
    Check to make sure your applications are compatible. PowerPC applications are no longer supported.      
    Application Compatibility
    You can also check which applications are PowerPC by going to the  menu, select About this Mac, click on More info…, then click System Report and select Software/Applications.

  • AIR-CSCO-SE-WIFI-C does anyone know what happened to it?

                       Does anyone know what happened to the cisco product  AIR-CSCO-SE-WIFI-C ?  It was a PCCARD that along with an antenna could be used for spectrum analysis with a Laptop Computer.  There is no information on the Cisco web site relating to end of life or end of sale but it is not orderable in the CCW tool

    I think this might be what you are after:
    http://www.cisco.com/en/US/prod/collateral/wireless/ps9391/ps9393/prod_end-of-life_notice0900aecd80704565.html

  • For some reason the Apple ID window in iTunes  and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

    For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • Printing my own photos!  Does anyone know what happened to the area on the left hand side of iPhoto when you went into printing your own photos?  I used to be able to create a page of wallets and print it from my own computer and now I can't find it.Help

    Does anyone know what happened to printing your own photos in iphoto?  There used to be a thing on the left hand side of iphoto that you used to create wallets, 5x7, etc.  Now there is nothing there.  Can anyone help me?  I dont want to order stuff, i want to pirint my own.

    what version of iPhoto?
    LN

  • My iMac keeps shutting down suddenly.  Does anyone know what's causing this?

    My iMac keeps shutting down suddenly.  Does anyone know what's causing this?

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • Does ANYONE know whats wrong with this program?!?!

    Hey(again),
    Does anyone know whats wrong with this program?:
    public class FloatingNumbersTest
    public static void main(String args[])
    float float1 =50.0f;
    float closeFloat=0.001f
    float farfloat=100.0f
    if (float1<=closeFloat)
    System.out.print("Float1 pretty close to zero");
    if (float1>=closeFloat)
    System.out.print("Float1 is near 0");
    if (float1>=farfloat)
    System.out.print("Float1 is not even close to zero!"0
    }There has seemed to be 5 errors!

    public class FloatingNumbersTest
    public static void main(String args[])
    float float1 =50.0f;
    float closeFloat=0.001f
    float farfloat=100.0f
    if (float1<=closeFloat)
    HERE        System.out.print("Float1 pretty close to zero");
    if (float1>=closeFloat)
    System.out.print("Float1 is near 0");
    if (float1>=farfloat)
    System.out.print("Float1 is not even close to zero!"0
    }you're missing the opening { for the first if.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Does Anyone Know What Is Making This Happen?

    This happens so often, but so quickly, I am always surprised and can remember what just caused it....that is, what actions I just took that made it happen. But tonight, I started thinking maybe it's some kind of "feature" that one can defeat.
    Sometimes, when working in the MIXER window, I will be doing something with an AUX, maybe adding an effect, I don't know...but all of a sudden, it JUMPS over to the right of the screen. If you look at the top of the arrange window (if you can see it behind your mix window), it is as if the fader you are working with has become the FOCUS. Tonight I do remember choosing the OUTPUT fader and with a right click chose to "Create Arrange Track" so I could draw in some animation, and it jumped to the top of the ARRANGE page.
    I know this is vague, but basically, I don't want channels changing position once I have them somewhere. Does anyone know what I'm talking about, and is it a feature that can be defeated?
    Thanks
    Tom

    Tom Hartman1 wrote:
    Yes I'm sorry that is what it does, it jumps to the LEFT of the screen. And yes it might be in touch mode or some other automation mode, I hadn't thought of that...what is going on there?
    It's a "feature". As soon as you put an Aux track into an automation mode, it places it on the arrange page for you automatically. And not only that, it places it at the top of the arrange page, and is therefore, ahead, or in front of the regular audio/instrument tracks, and because of that, gets moved to the first channel strip(s) of your mixer window (since the mixer and arrange update with each other).
    Personally, I love the fact that the Aux track gets placed at the top of the arrange page, because that is where I always placed them myself, prior to version 8. But I do find it disconcerting that it moves within the mixer window. I personally would prefer it stay in place, like it would on a hardware console.

  • Does anyone know what is causing this error please?

    I recently ran sfc /scannow. It completed without giving me any notifications other than a number of:
    "Files that are required for Windows to run properly must be copied to the DLL cache."
    I was prompted to insert my XP SP3 installation CD and click on 'retry'.
    The scan lasted for around 40 minutes then closed.......at no stage was I advised that it had been unsuccessful.
    When I restarted my computer directly afterwards, half way through booting a 'please wait' appeared, as if something was taking place.
    I thought all had gone well until I looked in Event Viewer later. There are approximately 90 Windows File Protection entries there mostly with the following information:
    The system file ........ could not be copied into the DLL cache. The specific error code is 0x800b0100 [No signature was present in the subject]. This file is necessary to maintain system stability.
    Does anyone know what causes that error and what I need to do to resolve it please?

    Thank you very much for helping.
    I have already tried to run the Microsoft Fix it from there for XP SP3, the os I have>>>>>>>"This troubleshooter does not apply to your system. We're sorry, but this troubleshooter is not compatible with your current system's configuration."
    That was the only Microsoft information I could find on the specific error code I received: 0x800b0100......although the article applies to Microsoft Updates, I thought it might cover this too.
    I have now run SFC three times, but errors still showed in Event Viewer.
    I regularly run Chkdsk, last few times no errors.
    I am actually having my computer checked for malware right now by specialist malware removers......all the malware scans I regularly run have given me the all clear for some time (McAfee Stinger, Hitman Pro, Malwarebytes - MBAM, TDSSKiller) but there has
    been malware on my computer in the past, which was removed (not serious I was told).
    In two of the scans the techs asked me to carry out there are
    hundreds of dll cache entries under
    Files/Folders - Created Within 30 Days on the date I run SFC.
    I am waiting for this to be confirmed, but it looks to me as if SFC was actually successful to a large extent and the entries in Event Viewer are some failures (not all as I previously thought)?
    I also have a serious problem in relation to Microsoft Updates (please see my other question).

  • Does anyone know what happened to the app "Polarize"??

    I'm using iOS 5.0.1 on ip4..
    when i choose a picture, it jumps back to the homescreen..
    anyone knows what happen??

    Well the app "Polarize" is still available on the app store.
    As for the question regarding what is hapening when you chose a picture I do not know.

  • Does anyone know what happened to PropNetProxiesHTTPProxy?

    I need to set device wide proxy settings using a .mobileconfig in a similar way to this
    <dict>
                                  <key>PropNetProxiesHTTPEnable</key>
                                  <integer>1</integer>
                                  <key>PropNetProxiesHTTPProxy</key>
                                  <string>proxy.embc.uk.com</string>
                                  <key>PropNetProxiesHTTPPort</key>
                                  <integer>80</integer>
                        </dict>
    It seems that in iOS 4 these options have disappeared. Does anyone know why and if they can be put back in someway??
    Thanks,

    Well the app "Polarize" is still available on the app store.
    As for the question regarding what is hapening when you chose a picture I do not know.

  • I have one of the original iPads. It now keeps displaying activation required. I have to keep rebooting it does anyone know what is causing this.r

    I have one of the original iPads. For some reason it has started showing Verification required. I do not know what is causing this and it keeps rebooting.
    Can anyone offer any advice?
    Many thanks
    Laurence

    1. Windows 8.1 Enterprise w Update is the best. It allows you for sideloading in corporate environment without additional tools and licenses.
    http://technet.microsoft.com/en-us/windows/jj874388.aspx
    2. N series is for EU (without IE).
    3. Profesional is fine, but you will need some tools to achieve the same functionality that you have in "pack" Enterprise.
    4. VL is volume license, a type of license for multiple computers (to say it simply)
    5. MSDN forum is better alternative for problems like this.
    6. Attached to MSDN are licenses or at least references to web resources. Read license agreements carefully and let your installation and use follow the license.
    Rgds
    Milos

  • HT6011 Does anyone know what happened to she su command?

    The su and sudo commands do not work with OS x 10.9 (Mavericks).  Does anyone know how I can install apps as an admin?
    Thanks,
    Ruwach1

    If you are logged in as an 'admin', you can use
    sudo command -options arg1 arg2 ...
    Password: admin_account_password
    If you are logged in as a non-admin, then you can use
    su admin_acccount_name
    Password: admin_account_password
    sudo command -options arg1 arg2 ...
    You should not enable your root account, as that is a well known security attack vector.

  • Quotation marks appearing as left or right arrows, does anyone know what is causing this?

    Hi there we are using Indesign 2014, I am not sure if that has anything to do with this or not, but certain paragraphs in a document have a bug, where by when you type in a quotation mark (') a left or right arrow appears. We have found that if we clear the paragraph styling this disappears and the quotation marks work fine again. It is worth noting that these paragraphs did not have any paragraph styles applied to them, but they were pasted in from MS Word. Has anyone else experienced this issue and do you know where it comes from?

    Ok thanks for enlightening me. We checked all the language settings on our workstations and they seem to be all set up as English UK and smart quotes are set to be used. I am not sure how to check the language assigned to a paragraph, as I say, there is not paragraph style applied to this text… Can you please let me know how to check this?
    The more I think about it, the more I think it is some sort of styling that has come in from MS Word. I thought InDesign was pretty good at stripping out anything like this.

  • When loading certain websites the text appears funny and I get these strange large black page breaks. Does anyone know what might cause this?

    Here's a screen cap of what I normally see: http://i41.tinypic.com/4tq52a.jpg
    I can see websites that appear like that on Chrome as they should appear, but for some reason Firefox gives me all of that mess. It happens a lot on blogs, if that makes a difference. Also, I tried disabling my add-ons, but to no avail. Anyone got any ideas?

    That is a font problem. Firefox can't find the font and shows little boxes with the hex code instead.
    Try to set the pref <b>gfx.font_rendering.directwrite.use_gdi_table_loading</b> to false on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default via the right-click context menu if they are user set
    *Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Maybe you are looking for