Does anyone know what is wrong with iTunes today (4/16/13) ?
I keep getting an error message stating that something is wrong with the iTunes network. Anyone else getting that error?
Look at the threads....dozens of people here are experiencing it. SO whatever it is it's cross platforms and versions of the operating systems.
Waiting it out seems to be all folks can do.
Similar Messages
-
Does anyone know what's wrong with my ipod?
Hi, I have a 3rd generation 20Gb ipod that's almost 3 yrs old. Recently the battery life became so bad it would play less than 1 song before dying from full charge, so I bought a new super-life battery from Maplins and replaced the battery. It was a very fiddly job, but their were 2 of us doing it and I don't think we did anything wrong during the process.
Since replacing the battery, my ipod has a great battery life and the first 2 times I used it, it was perfect. Then it started acting very bizarrely. If left unconnected for a few hours, it would restore itself to factory settings, wiping its hard drive. Then on connecting to the computer it would perform a very long-winded check (with an icon appearing on the screen like a CD being examined with a magnifying glass), before I could put the music on again. It did this every time I used it, which was annoying, but I could at least use it in short bursts.
Now however, it will not work at all. Every time I connect it to the computer it does its checking and then either the ipod, the computer, or both will crash. On restarting both, it does the same again. If I start the ipod in disk mode, it appears in itunes and everything, and I can add music, but it just wipes itself again when I put it back to normal ipod mode. I've tried the 5 Rs and all have failed (although my software update didn't work too well, I'm not sure if it actually did it 'coz the software update prog kept crashing).
Basically, can anyone shed any light on what this fault is and how to fix it? Is it a problem with the ipod or something I did to it while changing the battery?
Thanks!
Alix. xx
ibook G3 900Mhz, 640Mb RAM, 40Gb HD Mac OS X (10.3.9) with 3rd generation ipodA. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service. -
Does anyone know what is wrong with flash games?
Whenever I try to load a flash game on any website, it comes up fine. However, when I simply click on a button, it freezes both Firefox and the flash script. I just downloaded FF v3.6.10 and updated Adobe Flash player. It was fine before the 3.6.10 update.
Everything else seems to be fine though...Safe mode did not help. In fact, it made Firefox freeze for longer than in normal mode.. I am also using the default theme..
When I run the Firefox safe mode, it does not come up with the safe mode dialog box like it says in the FAQ.
Edit: Actually, Java was the problem. To fix, go to start> All Programs> Accessories> System Tools> System Restore, and pick the date that you installed Java. That might help anyone who has this problem. -
Iphone 5 is having trouble focusing when taking pictures.
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.
Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.
-
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong?
To fix the freezing when sleeping problem go to System Preferences>Energy Saver and set 'Computer Sleep' to 'Never'. It seems there is a problem for some with Bluetooth failing to wake after sleep. This fixes it 100% for me and many others on here, until Apple issue a software update to address it.
Not sure what to suggest on the internet problem. I assume you are connected and receive and send emails OK.
Edit: To try to troubleshoot the internet issue maybe try turning the Firewall off: System Preferences>Security & Privacy>Firewall tab. -
My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?
When my mac finally turns on the date/time is reset a windows pops up saying, "Your computer's clock is set to a date before January 1, 2008. This may cause some applications to behave erractically."Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call. -
does anybody know what is wrong with the ipod when error 1437 is reportedduring the restore cycle?
Double check the connections on each end to make sure they are nice and snug. If possible, plug the Nano into another existing USB 2.0 port.
Also, with the iPod still connected, try resetting it. To do this, press and hold both the Select (Center) and Menu buttons (or the Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear.
Then try restoring the iPod again.
B-rock -
My wifes iphone will not allow her to download from the app store when not connected to the computer. Does anyone know what is wrong?
Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call. -
not sure what happened I down loaded lion and now at the bottom I can see the lio logo and it says paused does anyone know what went wrong or what that means
http://support.apple.com/kb/HT4485 here, this should help
-
Does anybody know what is wrong with my java code?
Does anybody know what is wrong with my java code?
--------------------Configuration: <Default>--------------------
stockApplet.java:47: cannot find symbol
symbol : variable M_pointThread
location: class StockApplet
if (M_pointThread==null)
^
stockApplet.java:49: cannot find symbol
symbol : variable M_pointThread
location: class StockApplet
M_pointThread=new Thread(this);
^
stockApplet.java:50: cannot find symbol
symbol : variable M_pointThread
location: class StockApplet
THE CODE:
import java.applet.*;
import java.awt.*;
import java.io.*;
import java.net.*;
public class StockApplet extends java.applet.Applet implements Runnable
int Move_Length=0,Move_Sum=0;
String FileName,Name_Str,Content_Date;
int SP[]=new int[2000];
int KP[]=new int[2000];
int JD[]=new int[2000];
int JG[]=new int[2000];
int Mid_Worth[]=new int[2000];
String myDate[]=new String[2000];
double CJL[]=new double[2000];
double MaxCJL,MidCJL;
Label label[]=new Label[10];
int MaxWorth,MinWorth;
int x_move0,x_move1,MaxLength=0;
int x0,y0,X,Y,Record_Num;
boolean Mouse_Move,Name_Change=true;
int JX_Five1,JX_Five2,JX_Ten1,JX_Ten2;
public void init()
TextField text1=new TextField();
Thread M_pointThread=null;
setLayout(null);
this.setBackground(Color.white);
this.setForeground(Color.black);
for(int i=1;i< 10;i++)
label=new Label();
this.add(label[i]);
label[i].reshape(i*80-65,10,50,15);
if(i==2){label[i].reshape(80,10,70,15);}
if(i==7){label[i].reshape(510,10,80,15);}
if(i >7){label[i].reshape((i-8)*490+45,380,70,15);}
FileName="six";
Name_Str="six";
this.add(text1);
text1.reshape(150,385,70,20);
text1.getText();
public void start()
if (M_pointThread==null)
M_pointThread=new Thread(this);
M_pointThread.start();Welcome to the forum. I think that George123 has your problem and its solution well in hand. Follow his good advice and you will have solved this problem. One other thing though just for future reference. If you post your code, here, you are going to want someone to be able to read it easily. Please use code tags when posting next time and your code will be much easier on the eye. You can find out about them here:
http://forum.java.sun.com/help.jspa?sec=formatting -
Does anyone know what's up with the iPhone 4s' battery life? Some days it last a long time and other days it drains extremely fast.
Not to point out the obvious, but battery life depends very much on what is running and how much the device is being used.
If the battery lasts longer on a day you make no phone calls, but lasts less the day you make 5 hour long calls, this is to be expected.
If however the iPhone has the same level of use on both days, with different power consumption, this would infer a background process (or App) is trying to do something (connecting to server or creating a back up etc).
I switched off all thrid party apps from being included in my iCloud backup, which saves a huge amount of space on the cloud and allows the back up to take barely a couple of minutes.
Battery life seems ok so far on my 64GB 4S (Bluetooth on, Wi-Fi on, Location Services on, Push notifications on, Screen set to just under half brightness with Auto Adjust on) -
hi everyone!
i have a macbook unibody and when i put a cd on the dick driver in it doesnt pull it , but when i push it in a little more it push it out!
does anyone knoes what is wrong? or how can i fix it?
thnxI'm not sure about your question, it's seems somewhat unclear, but if the above command doesn't work another you can try is using the diskutil command as follows:
"diskutil list"
or
"df -h"
(without "" quotes)
find where the cd is (usually /dev/disk1 but not always depending on what else you have pluged in)
then simply use the 'diskutil' command with the 'eject' argument specifying the device found from the previous command '/dev/disk1'(or what ever your optical is labeled as).
If this isn't your question, I have a macbook unibody late 2009 model and the strangest thing happends, If I downgrade to 10.6.1 my optical drive works fine anything 10.6.8 and above ejects my disk immediately, I have also tested my optical drive out on other OS's such as various linux distro's. Therefore I have come to the conclusion its a bug. - just food for thought. Hope some of this helps -
Help please! My phone has some kind of issue, besides being old, it has "magnified" I don't know what happened. I cannot figure out how to get it to go back to normal? It just happened when I touched a text message to read it. Does anyone know what I can do to fix this?
Double tap with three fingers
Maybe you are looking for
-
Error in conditional map using User Defined Function
All, In my mapping I basically have a user defined function that returns the filename of my inbound file from the adapter-specific message attributes (file adapter). I know this is coded properly because if I simply assign this function to my destin
-
I have accidently removed outlook from the dock. How can undo ?
Hello! i have accidently removed outlook from my dock. I can retrieve outlook?
-
Hi Guys, I have been playing around with pacman in the freebsd operating system. My goal is just to install a package into the freebsd system with pacman (no dependencies for now). The idea is to compile the software with the freebsd ports system, ma
-
Search Engine Optimization (SEO) and Lightroom
I have a client using Lightroom to post photo galleries and he is concerned about Search Engine Optimization. I'm not a Lightroom user but need to know if there is a way to set page titles and photo alt tags from Lightroom rather than after the fact.
-
Hi All, I want to create a segment in an Idoc. Shall I create database structure after creating the SEGMENT structure? First of all I want to create all the Segment structures and then I want to create structures in SE11. Please let me know shall I c