Does anyone know what .panic.plist refers to when my iphone5 crashed?

My iphone5 completely blacked out then began to flash btw black screen and apple logo. Performing a hard reset did not make the phone start working again. However, after 2 days, a hard reset did allow the phone to start working. It has only crashed one other time since the initial crash. When I looked under Data and Usage, it lists 5 decriptions of the incident as the date followed by various #s and then .panic.plist.
At the time of the crash, I was running iOS 7.0.4 (11B554A). i currently have upgraded software to 7.1
Could anyone give me a clue as to what caused the random crash and how to prevent it from happening again. I have only had this phone for 3 months but it was a replacement phone purchased from the apple store, therefore the warranty no longer is in effect.
Thank you for any advice that you can throw my direction

reseting the ipod wont lose any data on it
u can restore to an back up from itunes only data not in the back up will be lost
or u can restore the ipod right back to factory setting and all data is wiped from the ipod

Similar Messages

TS1424 Does anyone know what "unknown error 13010" means?

Does anyone know what "unknown error 13010 means when trying to open itunes this message appears?

Are you using a Mac and getting the error when trying to open iTunes ? If you are then you could see if this helps, it seems to have fixed that error for a number of people : https://discussions.apple.com/message/12116607#12116607

Hello, alot of my space taken up on my ipod nano is listed under (other) I don't know what this is but it sure takes up most of the space on my ipod. Does anyone know what (Other) refers to and how to remove it.?Thx

Hello, alot of my space taken up on my ipod nano is listed under (other) I don't know what this is but it sure takes up most of the space on my ipod. Does anyone know what (Other) refers to and how to remove it.?Thx

Hello Norman,
Welcome to the Apple Support Communities. To find out what the Other section is on your iPod Nano, the following will explain what the Other section is all about.
Understanding capacity on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1867
Once that is complete, then check the appropriate sections to see what is there. If you cannot isolate the issue then you may need to restore the iPod Nano. The following will assist with the restore process.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Regards,
-Norm G.

Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS

Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS?
I get this when pushing an AP template to six new 3502i series access points. The error reads like this:
*** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
**AP Parameters**
Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
MAC address has been changes to protect the names of the innocent...
The rest of the template appears to push. The 802.11a/n and 802.11b/g/n parameters show "success".
Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
Thanks in adavance!

Hi,
Two things :
1- Can you refresh configs from WLC to WCS and then give it a try ?
2- Is WCS using the right read-write community string for this WLC ?
(Since we see a "No Access" message in the error)
Thanks..Salil

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences I-Photo. Does anyone know what the problem could be?

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?

Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie

Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. Does anyone know what the problem is?

I am running a 7 year old MacBook Pro 15. Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. I did not have this problem with Mavericks OSX. Does anyone know what the problem is and is there a fix?

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

HT201364 I keep getting the message "The product distribution file could not be verified. It may be damaged or was not signed." Does anyone know what I can do to correct this so I can download OSX?

I keep getting the message "The product distribution file could not be verified. It may be damaged or was not signed." Does anyone know what I can do to correct this so I can download OSX?
I have a MacBook Pro with all the necessary requirements.

Here are a few things to try:
Restart your Modem and Router.
Reset iTunes Store Cache (iTunes Preferences, Advanced tabl)
Delete the App Store plists (close App Store first):
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
To get to these,iIf you still have your user Library hidden, hold down the Option key and select Library from the Go menu in Finder. Otherwise, just go into your home folder, then Library, and then Preferences.

Does anyone know what to???

does anyone know what to do when the droid charge starts telling you the the apps that you had are no longer installed on the phone and it wont allow you to access whats needed to redownload the apps or access the internet. I mean the camera has even stoped working. this is rediculous

Hello weese,
The Droid Charge is a revolutionary device and it raised the bar on 4G LTE devices! With its super AMOLED screen and 1GHz processor, the Charge offers a robust set of wireless entertainment features. May I ask what app(s) are you referring to that aren’t working? Can I assume that you are able to make and receive calls? If you are unable to uninstall the app then the next step would be a hard reset. Below is a link to how to complete a hard reset on the Droid Charge.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=42407
Keep in mind that it’s recommended that you back up all of your information prior to the reset. Backup Assistant Plus can be used to archive your contacts. Also, another option is to sync your contact and calendar entries to the Gmail account on the device. Once you have completed a hard reset then the device will need to be re-setup. There is a tutorial that walks through this process. After the device is setup, I encourage that you test all voice and data services. Once you try to re-download the app(s), please post your findings as I am eager to know the results.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Does anyone know what

Does Anyone know what's Apple stand on LOGIC 8 issues. Have they acknowledge any bugs? are they working patches/fixes, do they have technical docs talking about the frezing, crashing, clicks and other issues? Logic 8 is my first LOGIC version and unfortunately at this point is too unstable to even play with it!!!!!!!!!!!!!!!!!!!!!!

I guess I spoke or wrote, i was getting excited to use LOGIC and bang another crash, the one that you have hold the power button to reset.. I attached is the crash log, I was doing a track using one of Logic built synth, how can the built instruments not work?
Please help........
Unresolved kernel trap(cpu 1): 0x400 - Inst access DAR=0x00000000EFFFD2B0 PC=0x0000000080000000
Latest crash info for cpu 1:
Exception state (sv=0x7309B280)
PC=0x80000000; MSR=0x00009030; DAR=0xEFFFD2B0; DSISR=0x00000000; LR=0x80000000; R1=0x4508BE60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x000228B0 0x000ABCAC 0x05C03300
backtrace terminated - frame not mapped or invalid: 0xBFFFCD00
Proceeding back via exception chain:
Exception state (sv=0x7309B280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x5E19B000)
PC=0x04042348; MSR=0x0000F930; DAR=0xEFFFD2B0; DSISR=0x00200000; LR=0x0404229C; R1=0xBFFFCD00; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000004F486040 PC=0x0000000080000000
Latest crash info for cpu 0:
Exception state (sv=0x731CEC80)
PC=0x80000000; MSR=0x00009030; DAR=0x4F486040; DSISR=0x00000000; LR=0x80000002; R1=0x45003E60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x000228B0 0x000ABCAC 0x5A1D870F
backtrace terminated - frame not mapped or invalid: 0xBFFFAD90
Proceeding back via exception chain:
Exception state (sv=0x731CEC80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x730EA000)
PC=0x9000B348; MSR=0x0200F030; DAR=0x4F486040; DSISR=0x40000000; LR=0x9000B29C; R1=0xBFFFAD90; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
panic(cpu 1 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 1:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x7309B280)
PC=0x80000000; MSR=0x00009030; DAR=0xEFFFD2B0; DSISR=0x00000000; LR=0x80000000; R1=0x4508BE60; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x000228B0 0x000ABCAC 0x05C03300
backtrace terminated - frame not mapped or invalid: 0xBFFFCD00
Exception state (sv=0x5E19B000)
PC=0x04042348; MSR=0x0000F930; DAR=0xEFFFD2B0; DSISR=0x00200000; LR=0x0404229C; R1=0xBFFFCD00; XCP=0x00000030 (0xC00 - Sysp

Does anyone know what effects these are?

Does anyone know what effect has been put on these photos https://twitter.com/osviado/status/525731914582622208 and https://twitter.com/osviado/status/525701145709510656

llook like a light Comic effect on the first and for the second...are you referring to the skin? That can be done with posterize set low.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

As you haven't told us who your email provider is, no.
There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through.

I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

I
got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
Thank you for your help, Frank!
To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
regards

When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong?

When I go to yahoo with my iPhone 6 the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.

Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Does anyone know what .panic.plist refers to when my iphone5 crashed?

Similar Messages

Maybe you are looking for