Does anyone know what to do after the IOS 5 update when it wont sync your music or apps or even register with itunes saying device is not connected/ the required file is not found?
My iphone after the update to IOS 5 (which i had problems updating first anyway) wont even register with itunes saying its still half way through a restore when its not i have already restored it 4 times but still wont sync music or apps or finish restoring my phone because it always comes up device is not connected or the required file is not found?
Any ideas?? ive gone the 02 shop and they just said to keep trying to restore it but its really not solving anything.
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS
Similar Messages
-
I keep getting the message "The product distribution file could not be verified. It may be damaged or was not signed." Does anyone know what I can do to correct this so I can download OSX?
I have a MacBook Pro with all the necessary requirements.Here are a few things to try:
Restart your Modem and Router.
Reset iTunes Store Cache (iTunes Preferences, Advanced tabl)
Delete the App Store plists (close App Store first):
~/Library/Preferences/com.apple.appstore.plist
~/Library/Preferences/com.apple.storeagent.plist
To get to these,iIf you still have your user Library hidden, hold down the Option key and select Library from the Go menu in Finder. Otherwise, just go into your home folder, then Library, and then Preferences. -
I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.
Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results. -
i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?
I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps. -
I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps. Does anyone know what is happening here? Even updating an older game app resulted in the original game icon changing to the new identical icon that all new apps are appearing with. This new icon is like a page with a ruler, pencil and paintbrush. Any tips on how to stop this or how to revert to the icon as it appears on the app store would be appreciated.
https://discussions.apple.com/thread/6132949?tstart=0
-
After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?
Hello, if your install disk is locked (I assume with FileVault) there is no way to change the password. If it weren't locked there were at least two solutions. As far as I know, the only solutions now are:
- contact your dad
- erase and reinstall the OS X clean
Let us know. -
Hey does anyone know what the password is going to be after a restore?
hey does anyone know what the password is going to be after a restore?
I keep trying to poke them into action. I did send a email to the regulator who seemed to indicate the license or regulations we good to go . Maybe thier so hard pressed in building sites as you said although it seemed wrapped up a year ago. My friend ATT service is excellent here and the exact location has att tower there so I know this would work its just a matter of prodding Verizon into action . my hope is they will notice and do something about this .
-
After I sync my ipod itunes is giving me the message that backup for my ipod cannot be saved on the computer does anyone know what I could do to fix this issue?
Check out this Apple document -> iTunes: "Backup could not be saved on the computer" alert message
To resolve this issue, delete the backup in iTunes Preferences and then create a new backup. If you would like to retain a copy of the backup, you can move the backup file to a different location. The backup is located in the locations below.
On Windows Vista and Windows 7:
\Users\[username]\AppData\Roaming\Apple Computer\MobileSync\Backup\
To delete the backup file:
Open iTunes Preferences by choosing iTunes > Preferences (Mac) or Edit > Preferences (Windows).
Select Devices.
Select the device backup to delete.
Click Delete Backup. iTunes will ask if you are sure you want to delete the backup. Click Delete Backup.
Click OK.
To manually create a new backup, right-click (or Control-click) iPhone on the left side of the iTunes window under Devices and choose Back Up from the shortcut menu. -
Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook. Does anyone know what the dll for this service is so it can be manually added to outlook? I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook).
So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?I had the same issue and figured it out. First you have to start Outook as administrator. To do this, shift and right-click on outlook and click run as administrator. Next you need to enable Hard-disabled add-ins:
Hard-Disabled Add-Ins
Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.
Then you need to activate it.
To re-enable an add-in
In the application, click the File tab.
Click the ApplicationName Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Inactive Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click COM Add-ins, and then click Go.
In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
Click OK. -
Using OS10.7, my hard disc is full. When I go to "About this Mac - Storage", it shows that it is entirely filled with "Other". Does anyone know what "Other" is so that I can delete some of it?
First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal. -
IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?
Hey 11doski,
Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I just updated to OS X Yosemite Version 10.10.3 because After Effects CS6 would't open anymore. But it still does't work.
Does anyone know what to do?
Please in simple English, because I'm from Germany.
Thx.Thank you so much, Mr. Curtis! I'm not sure exactly how that worked, but it allowed me to get back on both AE and Premiere Pro. 10 points to you!
Also, for the other people that may have similar problems and are viewing this forum, definitely try this out. Listen to Jim's advice, don't use the most recent version (which is currectly 5.5.47) - instead try a slightly older one. The one I had installed was version 5.5.24.
Once again, thank you! You saved my project! -
I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin. After that error comes up my computer freezes and I have to force it to shut down. Does anyone know what that means and how I can fix it?
Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.
-
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong?
To fix the freezing when sleeping problem go to System Preferences>Energy Saver and set 'Computer Sleep' to 'Never'. It seems there is a problem for some with Bluetooth failing to wake after sleep. This fixes it 100% for me and many others on here, until Apple issue a software update to address it.
Not sure what to suggest on the internet problem. I assume you are connected and receive and send emails OK.
Edit: To try to troubleshoot the internet issue maybe try turning the Firewall off: System Preferences>Security & Privacy>Firewall tab.
Maybe you are looking for
-
Error in opening a file with name in chinese characters with Runtime.exec
The issue at hand is when I try to open a file with file name containing chinese characters in a localized environment in Windows through the following java code: Runtime.exec("rundll32 SHELL32.DLL,ShellExec_RunDLL {File_With_FileName_containing_Chin
-
Path in the Proxy (XI) Receiver comunication channel
Hi, If i choose the Proxy(XI) adapter in the Receiver communication channel we need to give the Path . how we will get the path.. and what is the Tcode for getting path.. and what is the use of path.. Thanks BABU
-
SEVERAL QUESTIONS FROM A NEW E71 USER
Hi all, I am a new user of the E71 and have a few queries: 1) why when I try to browse internet via contract internet or my own wifi the browser jsut sticks on ablank screen unless i enter a specific address - how do i get it to automatically go to a
-
How to put AVCHD and AVI formats in a timeline using Adobe production suite?
I shot an event with two different types of cameras (AVCHD camera and tape camera with AVI output). I converted the video of avchd into 1080p first, then put it with the tape output together, the video was jittery. How can I put them together in a ti
-
How can I get account support?
I have paid my membership but when I open an application on CC it says "we are having trouble verifying your account". please advise how i can fix this