Does anyone know why my MBP won't charge from an airline seat plug? This is a regular three prong outlet on a United/Continental plane.

Whenever I use a seat plug, the light on the computer end of my magsafe adapter comes on for a minute, then goes dark. Meanwhile all of the PC laptop users around me seem to be plugged in and getting power with no problem.

ask the airline or purchase this if you travel by plane often: http://store.apple.com/us/product/MB441Z/A

Similar Messages

  • Hello, does anyone know why when i drag and drop from the internet,why my images never show up?

    hello, does anyone know why when i drag and drop from the internet,why my images never show up?

    I'm wanting to drag images from the internet into a folder on my desktop or hard drive. I am used to being able to drag just about any image from any website off the web and into a folder on my old mac, but since I got my laptop, I've noticed I cannot do that. Is it a preference?

  • Does anyone know why some Apps won't load unless I buy a new App?

    I've been following a couple of threads. It seems some users, myself included, have a problem where certain Apps will not load. They simply start to open and then return back to the Home screen immediately. When it happens to me (maybe once per week) it's always the same Apps which refuse to load, and they ALL do it - Pages, Keynote, Numbers, Garageband, iMovie, Shareplus all stop working. The reported fix from all users is to go to the AppStore and either update, or buy another App - even a free one. Then all Apps work again properly. It started happening for me after upgrading to iOS 5 but many users had the same issue prior to iOS 5.
    So my question is, does anyone know why this is happening? I don't want to find myself out of 3G signal, or abroad when I've turned Data off, and unable to use my Apps. The fix is useful, but I can't understand why we even need a fix. Suggestions?

    Have you tried a full reset when this happens?  This happens to me on rare occasion and a reset fixes things.

  • Does anyone know why my music won't play on my 7th generation iPod nano? I tried resetting it already and that didn't work. Can someone please help?

    Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.

    I would to a Restore.  Select the iPod in iTunes.  Go to the Summary tab for the iPod.  There is a button there to do a Restore.  This will erase the iPod, re-install its software, and set it to default settings.  After Restore complete, try playing songs on the iPod again.
    If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod.  All 7th gen nanos are still under warranty.  If you have an Apple Store nearby, you should take it to the store's Genius Bar.  To minimize waiting, you can make a reservation on store's web page.
    http://www.apple.com/retail/

  • I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

    I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

    I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
    E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
    E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
    E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
    E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
    I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

  • Does anyone know why i can't watch movies from 1channel

    does anyone know why movies from 1channel wont play on my mac book

    Now you've really lost me.  How did we change the subject from not being able to play any movies from ichannel to being able to see the movie but not have sound to now iTunes not wanting to play downloaded movies.
    Sounds to me like you have multiple issues... focus on one thing at one time.
    Do ichannel movies play on your Mac without issues?
    Are you trying to play stuff off your Mac onto your TV and are having video or sound issues?  How are you connecting the Mac to your TV?  (Output and cable usage, etc.)
    In iTunes once a movie finishes downloading, it'll be listed in your Movie section, just click play from there.  It should play unless iTunes is unstable or something.  Quitting the app and restarting it via the iTunes menu should fix this unless the app itself has other issues.

  • Does anyone know why my documents won't open on the desktop

    Neither JPG/Word/folders nor the MacintoshHD will open when either single or double clicked? Any ideas why this could be?

    I would to a Restore.  Select the iPod in iTunes.  Go to the Summary tab for the iPod.  There is a button there to do a Restore.  This will erase the iPod, re-install its software, and set it to default settings.  After Restore complete, try playing songs on the iPod again.
    If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod.  All 7th gen nanos are still under warranty.  If you have an Apple Store nearby, you should take it to the store's Genius Bar.  To minimize waiting, you can make a reservation on store's web page.
    http://www.apple.com/retail/

  • Does anyone know why Reader X won't open secure .pdf, such as a downloaded manual?

    I'm using Vista 64,and updated to Reader X.  It will open standard .pdf files, but secure ones (I downloaded manuals for my Canon digital camera software) not only will not open, but cause Reader X to stop responding.
    My temporary solution:  delete X and reinstall 9.4.whatever.
    What has happened to the infallibility of this software?

    It could be that there is a problem with the pdf files. Each version of Acrobat and Reader are more intolerant to malformed pdfs as that is a vector for spyware and virii.

  • Does anyone know how to fix Safari 6.0 from loading incorrect pages like this?

    I have Avast Anti Virus installed and along with firewall turned on

    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you clickLog in.
     Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • My phone won't send or receive texts. Does anyone know why?

    Does anyone know why my phone won't send or receive texts? I've updated my phone numerous times.

    Settings > General > Reset > Reset Network Settings.
    Beyond that, SMS is a carrier feature.  Contact the carrier to troubleshoot.

  • My friend and I share an iCal calendar through iCloud.  Until recently, we would receive email notifications if either of us made changes to or added an event to the iCal calendar.  Does anyone know why those email notifications stopped?

    My friend and I share an iCal calendar through iCloud.  Until recently, we received email notificiations anytime either of us made changes to exisiting calendar events or added new items to the calendar.  Does anyone know why these email notificiations stopped?

    iCloud was experiencing problems with this a couple of days ago, where many users with shared calendars were getting email notifications even though their iCloud settings did not select to receive them.  Perhaps when they fixed this problem it reverted your settings to not receive email notifications.  Got to iCloud and check your setting for this.  If it still look correct, try turning off email notifications, save the change, then turn them back on again and save the change again.

  • Does anyone know why all of a sudden any new parent divs I add won't display in browser preview?

    Does anyone know why all of a sudden any new parent divs I add won't display in browser preview?

    yes styles are applied. What does not show up are the container divs - they all have the thin purple borders.
    The "Blog Lovers" image shows up but it is inside the #blogindex div - which seems to be invisible because the elements inside #blogindex div are just piled on top of each other. (see below html) This is now happening on all the pages of this site.
    (I test a different site in DW and I was able to add divs and borders and content inside divs just fine.)
    <!-- start #blogindex --> 
         <div id="blogindex">
            <div id="blog_image1"><img src="images/bloglovers.gif" alt="Blog Lovers" /></div>   
             <div id="blog_image2"><img src="images/gcblogheader350x70.jpg" alt="Gina Charles Blog" /></div>
          <div id="blogindex_text">
          <p class="blackbolditalic">Visit the blog for happenings, highlights and conversation! </p></div>
          </div>     
       <!-- end #blogindex -->
    http://www.newworldapparel.com/tests/  -scroll 1/2 way down page to see the "Blog Lovers" pile up!

  • HT201272 I purchased the Killers new album and for some reason now my computer says it can't find the files. So I tried to download the album again off my iTunes acount but the cloud button won't appear. Does anyone know why this is happening?

    I purchased the Killers new album and for some reason now my computer says it can't find the files. So I tried to download the album again off my iTunes acount but the cloud button won't appear. Does anyone know why this is happening?

    These are user-to-user forums, you are not talking to Apple here.
    Audiobooks (and ringtones) are currently a one-time only download. I believe that they are all supplied to Apple by audible.com, so I assume that it's them who are requiring the one-time only download restriction. To get it onto your other devices you will need to sync it via a computer. Depending upon what country that you are in, Audible.com have their own app (Audiobooks from Audible) so you might be able to buy direct from them, though I don't know whether you can buy within their app or download audiobooks directly from them within the app e.g. whether they need to be copied via a computer.

  • Does anyone know why a magic mouse won't scroll in calendar in mavericks?

    does anyone know why a magic mouse won't scroll in calendar in mavericks?
    It will scroll in a window that has an indicator scroll bar on the right side but not in the new seamless calendar view. The built in trackpad on my mid 2012 macbook pro will scroll.

    or uninstall those mpkgs
    Yes.
    Barry

  • HT4199 Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller

Maybe you are looking for

  • Open two movies at the same time

    It seems that it is not possible to open two movies (.cp) at the same time with Captivate 1 (well you can run a new Captivate program an open the second movie) but will it be possible to open more than one movie at the same time in Captivate 2? Thank

  • Shared Variable Engine

    Hi, What happens to network variables stored in the RT machine after a restart(after calling RT restart). I am experiancing weid behaviour. They seem to reset to a default value and I checked in the project via their propertis, Initial values is not

  • Channels with different sampling in a DataPlugin

    Hallo, actually i´m programming an DataPlugin for a textdatafile witch is build like this: metadata channelname1; channelname2; channelname3 value_ch1; value_ch2/value_ch2/value_ch2; value_ch3 value_ch1; value_ch2/value_ch2/value_ch2; value_ch3 The p

  • Master and Details Tables Data

    Hi all I have two tables one is Master table and other one is Details table. How to write a query to get Master as well as Details table data. Detail table contain more than one record for particular Master Record. Pls Help me.

  • Leading zeroo in front of kunnr number from kna1 after selecting from kna1

    hi i and selecting kunnr from kna1 table which is char 10 i want to place leading zeros in front of customer number after selection from the table pls suggest the way to do so also let me know the funtion module to remove leading zeros regards Arora