Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express.

Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express 4.0.1. I did not buy this product yet but ask before. Now I have 4GB RAM and i5 MacBooK Pro. Do any problems exist using FCE having made films with this camera?
I save the films als QuickTime films (mov) and create DVDs with iDVD.
Will the data be too many if I make films with such a camera (HD) so that 1 hour of film cannot be burned to one DVD (or if is not necessary to film with such a good quality because in iDVD the film looses its quality?).

I was able to find this info regarding the camera:
AVCHD 1080/50i. 1080/25P (Maximum AVCHD 24Mbps)
Recording Modes
MXP 24Mbps / FXP 17Mbps / XP+ 12Mbps / SP 7Mbps / LP 5Mbps
The 1080/50i (interlaced) modes will work with FCE. PAL in this case. 60i is NTSC.
Al

Similar Messages

Use of DV and HDV cameras with Final Cut Express

I have both a DV and HDV camera. How do I switch between one and the other in FCE?
Somehow I was able to change FCE to work with my HDV camera but now, when I want to work with my DV camera (to print an edited piece to video tape, for example) FCE keep telling me it cannot find the HDV camera.

Thanks for your response. Dumb question. I edited a piece while FCE was set to HDV (although the original video was not HDV -- it was a transfer from 8 mm home movies) so I assume FCE thinks the video is HDV. Just how, then, do I put the edited sequence into a new DV sequence? As you can see, I'm fuzzy about the finer points of FCE. Thanks.

Which codec to use for editing AND motion graphics (ala Final Cut Studio)?

I have a prosumer-level AVCHD camcorder (Panasonic HDC-TM700) and am working with Final Cut Studio. After doing a great deal of research it appears that there is NO real benefit to using any codec other than ProRes 422 for straight editing (a camera at this price point doesn't shoot images of a high enough quality to warrant using 422 HQ, which also requires more processor power, and not only does 4444 require rendering it also takes up a ton of space). However, I have read (many times) that there may be some benefit to using 422 HQ if I am doing motion graphics work (ala Motion 4). Can anyone verify this? Would it make any discernible difference when shooting with a camera like this? Even though it is a prosumer camcorder I am trying to squeeze as much value as I can out of the entire production.
Any input or advice?
Thanks!

Please don't double post.
http://discussions.apple.com/thread.jspa?messageID=13122088#13122088
x

Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1 I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders. I've used Sony tape based camcorders in the past. I'm looking for High Definition. I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible. I would like to download directly from the camera to FCE. I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia? And if not, but you really like another camcorder that you can recommend, what is it?

The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
One note, however, the Vixia HF M52 supports a number of different shooting modes. I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE. FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

My Bootstrap nav conundrum: Does anyone who has used a bootstrap nav in BC had this issue...

My Bootstrap nav conundrum: Does anyone who has used a bootstrap nav in BC had this issue or know the fix: If you look at any page on http://www.aerotype.com, the first two clicks on almost any part of the page (like the rotator image left or right arrow) cause the page to jump, and you open the inspector on the top nav area and look at the div with the class="navbar-collapse collapse navbar-right navbar-ex1-collapse" you'll see that an additional class, .in, is added and .collapse is removed on the first click, and a style="height: auto;" is added, then on the second click it's changed to style="height: 0;"... I can't figure our what is causing 'in' to be added to the class (or .collapse removed), what it's for, or how to change it, if that is the issue... the his doesn't happen when the class: navbar-collapse is removed, so I think is has something to do with that but of course the collapse doesn't function without it. If anyone can enlighten me on what is going on I would Greatly appreciate it.

You have this click function on the top'ish part of your site.js that is causing this issue!
// collapse navbar in phone mode on click $(document).on('click',function(){ $('.navbar-collapse').collapse('hide'); }) // end collapse navbar in phone mode on click
Your are better off just deleting it (the click function) as it is not doing what the code comment says it does.

RE: (forte-users) Does anyone have experience using OracleLarge Objects

hi ,
A few months ago, I tried a oracle stored procedure with a BLOB parameter,
but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
hth
suma
-----Original Message-----
From: Amin, Kamran [mailto:kamran.aminlendware.com]
Sent: Thursday, March 29, 2001 2:40 PM
To: 'Forte User Group'
Cc: Magaliff, Bill
Subject: (forte-users) Does anyone have experience using Oracle Large
Objects (LOB's)?
Does anyone have experience using Oracle Large Objects (LOB's) -
specifically the CLOB datatype? Forte supports Oracle LONG's but given that
Oracle is going to phase out that datatype and they're trying to push users
towards CLOB's instead of LONG's, I want to find out if Forte can handle it
and, if so, what we should know about mapping Forte datatypes to the Oracle
CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
that they currently don't support it.]
thanks in advance.
ka
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Hi,
Did you get any solution to this. If yes, please share.
Thanks,
Tints

IPhoto downloaded photos into an event and now they don't show up. They were deleted off the camera under the assumption they were in my library now I don't have anything. Does anyone have any useful advice?

I downloaded photos from my camera to iPhoto 11. They were accepted as a new event. I deleted off the camera disk. Now, after going back into the events folder, the photos are not there. Does anyone have some useful advice? I've lost about 200+ photos...

You can recover the shots from the Card with an app like MediaRecover
As for the Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I have a Yamaha DGX220 Piano Keyboard Does anyone of you out there experience the same problem?

I have a Yamaha DGX220 Piano Keyboard and I have downloaded their driver. After downloading and installing there is no interfacing with the computer, it doesn't recognize the Yamaha Midi driver.
Does anyone of you out there experience the same problem? I have downloaded the Mavericks OS.. The Yamaha company thinks there is a bug within Mavericks that causes this no connection issue.
Regards,
David Griffith

griffy2 wrote:
Hi,
Would you explain what remote MIDI sequencer is?
Your keyboard has a bulit-in Music recording device. This is actually a buiti-in digital MIDI music sequencer. It can also, output through the MIDI connectors the MIDI sequence to either software on a computer or other external MIDI devices like dedicated sound modules or computer software sound modules or software sequencers
I use both software MIDI music software sequencers and a dedicated hardware MIDI music recording sequencer in my system.
Dedicated digital MIDI hardwaremusic sequencers do the same things as the bulit-in sequencer on your keyboard and computer software music recording sequencing.
Digital MIDI music sequencers DO NOT RECORD SOUNDS.
They record things like what keys are pressed on the musical keyboard, how much key sensitivity and pressure was applied, other parameters like if you change the pitch of the keyboard up and down by half steps, the sound number and sound bank number, records pedal information, records wheel and pitch bend wheel information, records other MIDI active button controller information, etc.
Basically, keyboard sequencers, hardware sequencers and software sequencers record the performance nuances of your playing and NOT the actual sounds that you are hearing.

The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.

The latest version of iTunes does not allow me to open a playlist in a separate window. I need this feature. Is there another way? You used to be able to double click a playlist and have it appear in a new window.

Others have commented on this too. It seems to be one of the 'improvements' of the newer version you are supposed to embrace with joy as an exciting new development. You can send feedback to Apple but realize you may be perceived as standing in the path of progress.
http://www.apple.com/feedback/itunesapp.html

Does anyone have problems using the highlights, shadows and sharpness edits in iphoto? Since I uploaded Mountain Lion, those editing tabs do not work!

Does anyone have problems using the highlights, shadows and sharpness controls in iphoto 11? Since I uploaded Mountain Lion on my
mac mini, those editing features no longer work!!!!

Sorry, I booted into 10.8 just to test this, but I only have iPhoto 08.

Good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart

good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart

See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing.

HT3275 does anyone have step by step instructions for how to replace .sparsebundle to make time capsule with time machine work again. i accidently deleted it thank you

does anyone have step by step instructions for how to replace .sparsebundle to make time capsule with time machine work again. i accidently deleted it thank you

Error message Pop-up reads:
Time Machine could not complete the backup
The backup disk image "/Volumes/Data-1/myname.sparsebundle" could not be accessed (error - 1)

Panasonic camcorder HDC-TM90 any experience using Pavtube Video Converter with Final Cut Pro X

Does anyone have any experience using Pavtube Video Converter with Final Cut Pro X for Panasonic camcorder HDC-TM90 shooting in 1080 P 60 ( mts file extension)

Don't use these generic offbrand converters to get footage into FCP X. they re-encode your video and cause loss of quality. If FCP X cannot import your video then use a utility that simply re-wraps it into a quicktime file with no transcoding or loss. I prefer Clipwrap which works great and is updated frequently but there are free alternatives like Media Converter or Rewrap.
But version 10.04 of FCP X should import it directly from camera as long as the folder structure is complete and you are not trying to merely import it from single mts files.

Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system?

Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system? When I try to connect from my iMac I get a window that says "The version of the server you are trying to connect to is not supported." Is there a work-around to this problem or is it just not possible? It would be largly appriciated for a solutin beings my business is a small town newspaper, and we have some important files on the older computer that need to be acessed daily.

Actually to share files between OS 8-9 and OS X, all versions, is quite easy from what I read. Look here for some details.
http://reviews.cnet.com/8301-13727_7-20003464-263.html
And here.
https://www.google.com/search?q=file+sharing+Mac+OS+9.x&oq=file+sharing+Mac+OS+9 .x&aqs=chrome..69i57.20706j0j1&sourceid=chrome&ie=UTF-8
Or since both OS 9 and OS X can do SMB Windows sharing you could use that protocol to share files from one to the other.
Doesn't really matter what OS you are using. Mac OS/OS X shar files with Windows computers of all types and versions of Windows so the same applies for the different versions of Mac OS/OS X.
Each Operating System takes care of reading and writing files to there respective file formats of the hard drives so that does not have to be the same. They both just have to be able to do Ethernet with the same files sharing protocol.

Does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device

Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express.

Similar Messages

Maybe you are looking for