Does anyone on here use a presonus FIREBOX?

Hey guys,
Is anyone on here running an intel mac, with a presonus firebox with gb3?
Im thinking of buying one, but am curious if it will work with GarageBand on the intel machines, because ive had nothing but trouble with my old interface while trying to get it onto the intel.
Any input is appreciated.
Thanks!

I'm using another Presonus device, the Inspire, but the basics apply to all of them. Presonus devices use Apple's Core Audio, so you don't need any drivers, and they kept on working seamlessly when the Intel Macs were introduced. The Inspire has a control surface program that was updated for Intels, but I don't think you need any for the Firebox since the buttons and knobs are physical.
For more information on the Firebox, wait until the American forum users got up, there's a couple of them who can tell you more.

Similar Messages

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • My Bootstrap nav conundrum: Does anyone who has used a bootstrap nav in BC had this issue...

    My Bootstrap nav conundrum: Does anyone who has used a bootstrap nav in BC had this issue or know the fix: If you look at any page on http://www.aerotype.com, the first two clicks on almost any part of the page (like the rotator image left or right arrow) cause the page to jump, and you open the inspector on the top nav area and look at the div with the class="navbar-collapse collapse navbar-right navbar-ex1-collapse" you'll see that an additional class, .in, is added and .collapse is removed on the first click, and a style="height: auto;" is added, then on the second click it's changed to style="height: 0;"... I can't figure our what is causing 'in' to be added to the class (or .collapse removed), what it's for, or how to change it, if that is the issue... the his doesn't happen when the class: navbar-collapse is removed, so I think is has something to do with that but of course the collapse doesn't function without it. If anyone can enlighten me on what is going on I would Greatly appreciate it.

    You have this click function on the top'ish part of your site.js that is causing this issue!
    // collapse navbar in phone mode on click $(document).on('click',function(){ $('.navbar-collapse').collapse('hide'); }) // end collapse navbar in phone mode on click
    Your are better off just deleting it (the click function) as it is not doing what the code comment says it does.

  • RE: (forte-users) Does anyone have experience using OracleLarge Objects

    hi ,
    A few months ago, I tried a oracle stored procedure with a BLOB parameter,
    but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
    hth
    suma
    -----Original Message-----
    From: Amin, Kamran [mailto:kamran.aminlendware.com]
    Sent: Thursday, March 29, 2001 2:40 PM
    To: 'Forte User Group'
    Cc: Magaliff, Bill
    Subject: (forte-users) Does anyone have experience using Oracle Large
    Objects (LOB's)?
    Does anyone have experience using Oracle Large Objects (LOB's) -
    specifically the CLOB datatype? Forte supports Oracle LONG's but given that
    Oracle is going to phase out that datatype and they're trying to push users
    towards CLOB's instead of LONG's, I want to find out if Forte can handle it
    and, if so, what we should know about mapping Forte datatypes to the Oracle
    CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
    8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
    that they currently don't support it.]
    thanks in advance.
    ka
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Hi,
    Did you get any solution to this. If yes, please share.
    Thanks,
    Tints

  • IPhoto downloaded photos into an event and now they don't show up. They were deleted off the camera under the assumption they were in my library now I don't have anything.  Does anyone have any useful advice?

    I downloaded photos from my camera to iPhoto 11.  They were accepted as a new event.  I deleted off the camera disk.  Now, after going back into the events folder, the photos are not there. Does anyone have some useful advice? I've lost about 200+ photos...

    You can recover the shots from the Card with an app like MediaRecover
    As for the Library:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Does anyone have problems using the  highlights, shadows and sharpness edits in iphoto? Since I uploaded Mountain Lion, those editing tabs do not work!

    Does anyone have problems using the highlights, shadows and sharpness controls in iphoto 11? Since I uploaded Mountain Lion on my
    mac mini, those editing features no longer work!!!!

    Sorry, I booted into 10.8 just to test this, but I only have iPhoto 08.

  • Anyone on here using the NETGEAR WNDR3700 for infi...

    anyone on here using this router? it has a wan port i believe but wanted to know what your experiences are with it.

    Is it worth it? When you can get a new domain + webhost with 1 gigabite, etc for half the prize of .Mac?
    This is a corollary to, why buy a Mac when you can get a cheaper Windows PC at Wal-Mart. So why did we buy a Mac? Ease of use, reliability, the cool factor, it just works.
    I'd dispute the 1/2 price of .Mac idea - I've had to deal with some of the lowball outfits and there are lots of reasons to stay away from them, but sure, I can get a decent service with lots more space and more email addresses for $75 or so.
    I have an email address that is at least as reliable as my ISPs and since I seem to change ISPs every couple of years it is nice to have an email address (with aliases) that I don't change frequently. (Yes, I know about Google and I have one.) I can sync my address book and several other applications between my several computers. (Yes, I know there are other solutions but .Mac syncing just works.) I have webmail with an address book that is synced to my computer that I can use when I'm not sitting at my own computer. I have a convenient place to store a few files if I want to move them from one computer to another. It is convenient for posting pictures for family and friends to see.
    Why do I use .Mac? For the same reason I use a Mac. For the same reason I let someone else take care of my landscaping, change my oil, and groom my dog. Convenience.

  • Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express.

    Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express 4.0.1. I did not buy this product yet but ask before. Now I have 4GB RAM and i5 MacBooK Pro. Do any problems exist using FCE having made films with this camera?
    I save the films als QuickTime films (mov) and create DVDs with iDVD.
    Will the data be too many if I make films with such a camera (HD) so that 1 hour of film cannot be burned to one DVD (or if is not necessary to film with such a good quality because in iDVD the film looses its quality?).

    I was able to find this info regarding the camera:
    AVCHD 1080/50i. 1080/25P (Maximum AVCHD 24Mbps)
    Recording Modes
    MXP 24Mbps / FXP 17Mbps / XP+ 12Mbps / SP 7Mbps / LP 5Mbps
    The 1080/50i (interlaced) modes will work with FCE. PAL in this case. 60i is NTSC.
    Al

  • Does anyone make here make email address lists in MailChimp?

    I thought that there might be a couple of Dreamweaver users here who  also use MailChimp. What I would like to know is how to send a campaign  out to specific email addresses. I know you can send by certain search  critera but I would like to send out by a list of specific email ads  instead. Does anyone know how to do this? MailChimp's tech support is  closed I would really like to get this out by early tomorrow morning and  sent out today.
    Thanks

    I heard back from MailChimp tech support and this is what they suggested I do:
    "In order to send a campaign to just a specific group of peopel you will want to use the segmenting options as outlined in this article: How can I send to a segment of my list?: http://eepurl.com/gWN5.
    If the group of people you wish to send to isn't currently in a specific segment you would need to add segmenting criteria to their information in order to segment the send. You can either create a column for "Non Trade Show" and mark all of those people who didn't attened with an X in that column and then segment by that, or you can create a group for those users who didnt attend the trade show and add all the relevant subscirbers to it.
    You would then use one of the options that was added in order to send to only that particular segment of your list!"
    I kept looking around at different ways to do this and I found that the easiest way to add the lists was to select the check box next to all the addresses of people who went to the trade show. I then selected bulk change and copied all those addresses to the list I set up for people who went to the show. I did this same operation for the people who did not go to the show. When I did it this way I didn't have to worry about adding duplicacte email addresses.
    Thanks for all your help.

  • Business Objects Crystal Reports with Clarity - anyone on here use is?

    Hi all,
    we are in the process of upgrading our Clarity system to version 8.1.1 - which has gone away from Actuate to support Crystal Reports instead.
    Is anyone here using Crystal Reports with Actuate already?
    I was looking into upgrading from CR XI to CR 2008 - but wondered if the extra functionality is worth the upgrade cost.
    They say that users can interact with the data by sorting/filtering and re-formatting without re-querying the database - and there is a parameter panel that allows new parameters to be added to the 'saved' data..
    i was wondering if those features are available when it is used with Clarity..
    thanks in advance,
    Matt

    Hi Matthew,
    I recommend to post this query to the [Crystal Reports Design|SAP Crystal Reports;  forum:
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all Crystal Reports Design queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • I can't use my Presonus Firebox with my new 10.6 OS, the red button is still red

    Hi there,
    It's my first post with this community, and Im' french, so my english is not so good.
    I have upgraded yesterday my old 10.4 OS for 10.6. I am musician, I use Logic Pro 8, and my Presonus Firebox (firewire plug) doesn't work. The red button is still red, not blue.
    My computer recognizes the firebox (I have seen this in "about this mac/ + infos/firewire"), and also in Logic, pref/audio, the presonus is seen by the software. But no sound, no signal from my midi keyboard.
    It's known that this kind of harware doesn't need drivers... but I don't know what to do. And I have work to do...
    Thank you to everyone for giving me answers, or at least, trails.
    Thank You
    MyBass

    I auto reply. In fact, an update of the firmware was needed...

  • HT204380 Does anyone have experience using wifi ipad mini in Kazakhstan?

    Has anyone had experience using the ipad mini wifi in Kazakhstan?
    If so, any suggestions or comments as to Face Time use, settings, apps, VPN, are much appreciated.
    Thanks!

    These cables do not work. I have one myself that I thought I would try, basically VGA ports transmit an analogue signal, HDMI carries digital signals. You would need a powered convertor where you can plug in VGA, the box does the magic and outputs HDMI. These claim to do the trick:
    http://www.tvcables.co.uk/cgi-bin/tvcables/vga-to-hdmi-converter.html
    I have no association with tvcables.co.uk or the manufacturer of the box, but you should look for something like this, it carries your audio too.

  • Does anyone work here? Photoshop Elements 10 still not loading. No response from Adobe :(

    This is the error message I get - in case anyone's interested. Adobe has to have the worst Customer service I've ever come across - because it's non existent.
    Microsoft Visual C++ Runtime Library
    Runtime Error!
    Program: C:\Program Files (x...
    This application has requested the Runtime to terminate it in an unusual way.
      Please contact the application's support team for more information. 
    Then
    Adobe Photoshop Elements 10
    [Main Instruction]
    Adobe Photoshop Elements 10 has stopped working
    [Content]
    Windows is checking for a solution to the problem...
    Then

    Just giving a suggestion which might not work.
    Try downloading Trial PSE6 and use your Serial to activate it. Not sure your activation is expired or not. In that case Adobe Customer Care can help you.

  • Hello? admins? does anyone work here from creative? or did creative go bankru

    <FONT face=Tahoma size=2>Hello..>When I listen to songs using ZEN MICRO PHOTO..>I hear this annoying backgrouns sound from my>earphone... I switched the earphone and keep>hearing this background noise..>I want to ask you guys if you ever tested this..>It is cleary hearable when the volume is 0..>I can only hear this background noise when the>screen is on..>Is this common problem for all players?>If not can you tell me which zmp models don't>make this sounds and can you tell me how to buy>these non hissing player from best buy? like>barcode numbers on box or something..>my second question is did you guys stop>making hte firmware for zmp? or are you planning>to make more?...

    williamjaba wrote:
    sound is a big prob with creative products. If it has to be sent back 80% of the time it's because of sound.
    And you get these statistics from where exactly?
    PB

  • Does anyone have experience using MS Visual Web Designer 2008 VB?

    I've created a webservice that accepts a single input (ID number) and returns data from a table. It's written in VB. My question is what do I return so I can see the fields in Designer data connection?
    Right now I'm returning XML in an object so all I see is webservice result,
    A string gives me the same thing. When I try to return XML or XDocument I get an error on the webservice. There was no help in the MS knowledge base that I have found so far on the error.
    I tried to use the returned string by adding it to the data structure using:
    xfa.datasets.data.loadXML(xfa.resolveNode("form1.#subform.xmldata").rawValue
    ,FALSE,FALSE);xfa.resolveNode("form1.#subform.TextField4").rawValue
    = xfa.datasets.data.saveXML();
    for (var i=0; i < len; i++){
      app.alert("adding " + theDataGroup.nodes.item(i).nodes.item(0).value + " to the DD list");
      //DropDownList2.addItem(theDataGroup.nodes.item(i).nodes.item(0).value);
    from this example:
    xfa.datasets.data.loadXML(xml_result.rawValue, false, false);
    xml_result.rawValue = xfa.datasets.data.saveXML();
    var theDataGroup = xfa.resolveNode("xfa.data.people");
    var len = theDataGroup.nodes.length;
    for (var i=0; i < len; i++){
      app.alert("adding " + theDataGroup.nodes.item(i).nodes.item(0).value + " to the DD list");
      DropDownList2.addItem(theDataGroup.nodes.item(i).nodes.item(0).value);
    on a button click event to see what I get but nothing happens even when I paste xml into the xmldata field.
    What am i missing?

    You have no choice but to return the XML as a string and then load it into the data dom. Are you getting the XML returned to the field? The manipulation of the data in the dom can be tricky....can you send the form and the data file that is returned to [email protected] and I will have a look when I get a chance.
    paul

Maybe you are looking for