Does anyone out there have LabVIEW drivers for either a Z-Mike 1102 (Beta Lasermike) or a Compumotor 6104 (Parker)?

CompuMotor creates a Motion Toolbox for LabVIEW, but it is not supported by National Instruments.
You can find some support files and downloads for the 6104 from http://www.compumotor.com/support_samples.htm

Similar Messages

I need an email address for iBooks Author support. Does anyone out there have that info?

I am unable to raise anyone at Apple regarding support for the iBooks Author App. Does anyone know of an email address or telephone number for that support group.Thank you

Apple does not provide application support via email. You can call the standard Apple technical support lines for assistance, though I don't know how expert the technicians will be in that particular application, and you'll quite probably have to pay for the support call.
You might try posting your issue/question in the iBooks Author forum here:
https://discussions.apple.com/community/books/ibooks_author
I suspect you'll be more likely to get an answer there than you will by calling Apple.
Regards.

Does anyone out there have any information about running LabVIEW 6i on a Windows 2000 Dell Inspiron 7500 laptop?

Good news, bad news. I will take any info I can get. I am having trouble getting LabVIEW to see an HP 8703 device. I used to have Win98 and LabVIEW 5.1 running on this machine without a problem until I tried to upgrade to 6i. The machine would not work correctly or recognize devices consistently.
Thanks for your help!

The problem you are seeing likely does not have to do with LabVIEW, but more likely with the GPIB drivers. If you did a full install of LabVIEW 6, it probably installed new drivers over the old ones and might have caused some problem. You aught to be able to test the 488.2 drivers and the device communication using MAX (Measurement and Automation Explorer) If have trouble communicating with your device in MAX, might want to consider completely uninstalling the drivers and reinstalling.

I have the same JRE error does anyone out there have a solution?

See previous post for error message:
I am trying to install Oracle 8.1.6 on a Windows 98 machine. When I attempt to run the setup.exe I get an error message:"Unable to locate ../.../.../jre.exe. Please log on to www.javasoft.com and download JRE 1.1.7 or later."
null

Refer to Release Notes for 8.1.6, there are good instructions about JRE related installation problems.

When scrolling I get this weird wavy thing that is hard to look at. It looks like the waves above a barbeque or heat waves rising off the pavement on a hot day. Does anyone out there have this issue?

The "heat wave" on the screen happens when scrolling. It is driving me nuts!!!

Thank you so much for the help. It solved it. Now my eyes can look at the screen again when i scroll using Firefox 8.0! I appreciate your time to help me!

Does someone out there have the absolute idiots guide of how to backup my calender data?

Does anyone out there have to idiots guide of how to back up my calender?

You haven't said, but I'll assume you are using iCloud for your calendars, so here are Apple's instructions for a variety of use cases: http://support.apple.com/kb/HT4910

I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

Anyone out there have a mac osx 10.3 install & restart discs?

Anyone out there have a mac osx 10.3 install & restart discs?

Some Powerbook G4s actually would only work with the Gray discs that came with them.
Without knowing the age of the Powerbook G4
http://discussions.apple.com/docs/DOC-6413
It is impossible to know if system specific 10.3 installer is needed, or if a retail 10.4 is needed.
Know these dates:
Macs that were released between 10/24/2003 and 12/17/2003 (xx343...xx350 serial numbers, where x can be any letter or number) could only install 10.3.2, or 10.3.5 retail as is labelled on the disc, and the prebundled installer disc that came with them. All retail discs for 10.3 looked like: and did not say upgrade, dropin, or OEM.
Macs that were released between 12/17/2003 and 8/12/2004 with serial numbers xx351...xx432 could only install 10.3.5 retail as is labelled on the disc and the prebundled 10.3 installer disc that came with them.
Macs released with serial numbers xx433 to xx516 could only use the 10.3 installer disc that shipped with them to install 10.3, and for retail release could use 10.4, or 10.5 depending on their configuration stated in this user tip:
https://discussions.apple.com/docs/DOC-2541
This is all covered in my tip:
https://discussions.apple.com/docs/DOC-2831
Please do NOT post your serial number on the forum, as it is public.

Iphoto will not open, says I am useing a newer version, beats me, I can't find it, anyone out there have a clue, Thanks

Iphoto will not open, says I am useing a newer version, beats me, I can't find it, anyone out there have a clue, Thanks

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database.
OT

Does anyone out there pleaze know of any software equal to the much loved

Does anyone out there please know of any software equal to the much loved & missed Adobe Streamline?... Illustrator's trace function just ISN'T on par...

Does anyone out there please know of any software equal to the much loved & missed Adobe Streamline?... Illustrator's trace function just ISN'T on par...

Does anyone out there know the meaning and history of the APPLE logo?

I am doing a paper on Apple Corporation and I called to ask them and a lady at corporate said "we dont comment on things like that". I asked if the meaning was secret and she said, "no we are a forward moving company and we dont talk about stufff like that." unquote.
I wanted to know the origin and meaning of how Steve Jobs or whoever picked an apple as the logo and why there is a bite out of the apple on the right side.
Anyone out there be so kind as to answer this iof you know--or care to venture a guess??? Jeff

The name "Apple Computer"
A lot of people wonder where the name "Apple Computer" came from, as it is a rather unusal name for a computer company.
Steve Jobs came up with the name in early 1976. At the time, he was often visiting and working on a small farm friends of his owned. It was a hippie commune where Steve spent a few months of the year.
When he returned from one of those stays, he told Steve Wozniak about his idea. Jobs probably was working on apple plantages. Or he just wanted their startup to be in front of Atari in the phone book. Or it was a tribute to Apple Records, the music label of the Beatles.
Whatever the true origin of the name was, Woz knew instantly that they were going to be in trouble with Apple Records sooner or later. But as they were unable find a name that sounded better than Apple Computer, the name was chosen.
Woz's worries turned out to be justified. Apple Computer, Inc. was sued by Apple Records over trademark violations in 1989. (for more on this see below)
The Apple logo
The first Apple logo was designed by Ron Wayne, co-founder of Apple Computer. It was rather a picture than a logo. It showed Sir Isaac Newton sitting beneath the famous Apple tree thinking about gravity.
It was only used for the Apple I. Steve Jobs felt that it was too intellectual and it was almost impossible to put on computers as one could only recognize the details of the drawing when it was large enough.
Therefore, in 1977 Jobs asked the art designer Rob Janoff to design the new Apple logo. The new logo had a simple shape of an Apple, bitten into, with the colors of the rainbow in the wrong order. The bite symbolized knowlegde (in the bible the apple was the fruit of the tree of knowledge) and the bite could also be pronounced "byte", a reference to computer technology.
When Jean Louis Gassée was asked about his thoughts to the Apple logo he answered: "One of the deep mysteries to me is our logo, the symbol of **** and knowledge, bitten into, all crossed with the colors of the rainbow in the wrong order. You couldn't dream of a more appropriate logo: ****, knowledge, hope, and anarchy."
In 1997, Steve Jobs decided to drop the multi-colored Apple logo and replace it by a solid-colored logo. The first Apple computers to feature the new logo were the new PowerBook G3s in 1998 (although they still featured both types of logos).
kEat0n

Does anbody have labview drivers for Tenney Temperature Chambers?

When I run the Measurement and Automation program, I can detect the instrument, but when I send a query to it, "*IDN?" it says the instument did not respond to the query string!
Does anyone have a vi that will control this chamber?
Or some idea on why I can not communicate with it?
Thanking you all in advance,
D.S

Hi D.S.
The fact that the chamber is not responding to the *IDN? doesn't mean that you cannot communicate to it. Since MAX is detecting the device, this means that the device responds to the controller commands and performs the appropriate handshake to accept bytes. The device is most likely not responding to *IDN? because it doesn't recognize the command.
You should refer to the chamber's documentation to determine what commands it accepts and recognizes.
DiegoF
National Instruments.

Is there any labview drivers for Spirent 5500 wireless channel emulator

Spirent 5500 currently doesn't have GPIB capability despite the connector on the rear panel. It is controlled via .net from a laptop. Labview drivers needed.

Clarification:
National Instruments would like to receive driver requests for all instruments that do not have drivers available on ni.com/idnet. Each request is being added to our instrument driver request database and considered for development. We try to develop instrument drivers according to popularity. Unfortunately, we cannot develop instrument drivers for all the requests we receive.
If a customer would like to try developing his/her own instrument driver, we have documentation, model instrument drivers, and driver templates to help him/her in development. This information can be found on our web site: http://www.ni.com/devzone/idnet/development.htm
Thanks,
Instrument Driver/IVI Group
National Instruments

My MacBook Air shows only the desktop, the "dock" has disappeared. This happened before, and a technician said it had to do with the settings. Does anyone out there know how to retrieve the "dock" so it reappears? thanks, roger

My MacBook Air display shows only the desktop background, the dock has disappeared. Does anyone know how to restore the dock to the desktop? thanks

The dock can be configured to automatically show and hide when moving the mouse cursor over the current location. You can try to move the mouse over the dock area to see if it appears. Hopefully it will, and if you don't want that setting you can then change it to show permanently in the System Preferences > Dock settings.
If that doesn't work you can change the dock location in the preference settings to align on a different side of the window to see if it appears. That's all I can suggest at the moment.
Let us know how you make out.

Anyone out there have an idea on how to solve an "Empty print file!" error?

I am trying print to a Lexmark C543 network printer from a PowerPC G5 (running 10.5.7). Prior to receiving the error message (Empty print file!) the print queue displays the following messages: “Looking for Lexmark C543” and then “The printer is now on-line”.
Now there is a twist, I can successfully print test pages, pdf files (only using Adobe Reader 9.1.2, not the Apple Preview application), and image files (only using Adobe Lightroom 2.4, not the Apple Preview application). If I try and print a webpage using Safari (4.0.1) or Word document using Word:MAC 2008 version 12.1.9 it will error out, unless I print it to a PDF and then reopen the file via Adobe Reader.
Here are the actions I have already tried, and didn’t work?
- Removed and installed printer (both via GUI and CUPS)
- Reset printer system
- Verify Disk (no problems found)
- Repaired Disk Permissions
- Removed/renamed all files I could find in Library and System relating to C543
- Downloaded and installed new driver
- Called Lexmark, “3rd Level support looked at the issue and the log and they concluded that it's a problem with the OS.”
Below is an excerpt from the CUPS error log that might shed some further light on the subject.
I [29/Jun/2009:10:59:44 -0400] [Job 6] Started filter /usr/libexec/cups/filter/cgpdftops (PID 205)
I [29/Jun/2009:10:59:44 -0400] [Job 6] Started filter /usr/libexec/cups/filter/pstops (PID 206)
I [29/Jun/2009:10:59:44 -0400] [Job 6] Started backend /usr/libexec/cups/backend/mdns (PID 207)
E [29/Jun/2009:11:00:11 -0400] PID 206 (/usr/libexec/cups/filter/pstops) stopped with status 1!
I [29/Jun/2009:11:00:11 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
E [29/Jun/2009:11:00:11 -0400] PID 205 (/usr/libexec/cups/filter/cgpdftops) crashed on signal 10!
I [29/Jun/2009:11:00:11 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
E [29/Jun/2009:11:00:11 -0400] [Job 6] Empty print file!
E [29/Jun/2009:11:00:14 -0400] PID 207 (/usr/libexec/cups/backend/mdns) stopped with status 1!
I [29/Jun/2009:11:00:14 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
I [29/Jun/2009:11:00:14 -0400] [Job 6] Backend returned status 1 (failed)
I [29/Jun/2009:11:00:14 -0400] Saving printers.conf...

PaHu,
Thank you for welcoming me to Apple Discussions as well as explaining what you saw in the log.
I downloaded and ran the 10.5.7 Combo updater, but unfortunately it did not resolve my empty print file error.
Print Therapy (version 6.0.5) you suggested (and I downloaded) looked very promising. Unfortunately it too did not resolve my empty print file error. I have included the Print Therapy log below in hopes it will shed more light on the problem. The Print Therapy log stated: "You may need to reinstall OS X to resolve your printing issues." I am assuming this is probably because of the three missing files/directories it found.
Please let me know what my next steps should be, and if I should reinstall Leopard. If I have to reinstall Leopard is it possible to just install on top of the existing version without loosing or destroying the files (documents, images, etc.) we created?
Thanks again for all your help!
Brian
###Permission Repairs###
Starting permission verification and repair, omitting localized files...
The file /private/var/run/cups/certs/0 is missing!
The owner setting for the file /Library/Printers/InstalledPrinters.plist is incorrect!
It is 501, but should be 0
Repaired.
The directory /var/db/lockdown/Library is missing!
The directory /var/db/lockdown/Library/Printers is missing!
The directory /var/db/lockdown/Library/Preferences is missing!
The permissions for the directory /Users/Beth/Library are incorrect!
They are drwxr-xr-x, but should be drwx------
Repaired.
Recreating symbolic links...
Done.
Verification complete.
1624 files examined. 2 permission problems were found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
4 missing files/directories found during the verification process. They may be responsible for certain printing problems. Print Therapy cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
*******************Restarted Computer and re-added printer (test print failed, same problem)*******
###Temp & Prefs###
Starting /private/tmp directory and /tmp symbolic link permission verification...
Verification complete.
No problems found with the /private/tmp directory and /tmp symbolic link permissions.
Begin deleting temporary files for all users...
Temporary files for all users deleted successfully.
###CUPS Tools###
Stopping the the cupsd process...
The cupsd process has been successfully stopped. Please note that printing and/or adding printers with the Print & Fax System Preferences pane will not be possible until the cupsd process is running again.
Deleting the contents of the /private/var/spool/cups directory...
4 file(s) deleted from the /private/var/spool/cups/cache and /private/var/spool/cups/tmp directories.
Creating a new cupsd.conf file...
The cupsd process has been successfully started.
The cupsd.conf file was successfully replaced.
*******************Restarted Computer (test print failed, same problem)*******
###System Users###
Verifying root user attributes...
The information for the root user appears to be valid.
Verifying Printing Services user attributes...
The information for the Printing Services user appears to be valid.
Verifying Print Operators group attributes...
The information for the Print Operators group appears to be valid.
###Reset & Backup####
Begin resetting the printing system...
The printing system was reset successfully.
*******************Restarted Computer and re-added printer (test print failed, same problem)*******
###Permission Repairs###
Starting permission verification and repair...
The permissions for the file /Library/Printers/PPDs/Contents/Resources/Lexmark C540.gz are incorrect!
They are -rwxrwxr-x, but should be -rw-rw-r--
Repaired.
The permissions for the file /Library/Printers/PPDs/Contents/Resources/Lexmark C543.gz are incorrect!
They are -rwxrwxr-x, but should be -rw-rw-r--
Repaired.
The permissions for the file /Library/Printers/PPDs/Contents/Resources/Lexmark C544.gz are incorrect!
They are -rwxrwxr-x, but should be -rw-rw-r--
Repaired.
The directory /var/db/lockdown/Library is missing!
The directory /var/db/lockdown/Library/Printers is missing!
The directory /var/db/lockdown/Library/Preferences is missing!
Recreating symbolic links...
Done.
Verification complete.
4880 files examined. 3 permission problems were found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Print Therapy cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
---Second run (verification run)---
Saturday, July 18, 2009 10:38:13 PM
Starting permission verification and repair...
The directory /var/db/lockdown/Library is missing!
The directory /var/db/lockdown/Library/Printers is missing!
The directory /var/db/lockdown/Library/Preferences is missing!
Recreating symbolic links...
Done.
Verification complete.
4880 files examined. No permission problems were found.
3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Print Therapy cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
*******************Restarted Computer (test print failed, same problem)*******

Does anyone out there have LabVIEW drivers for either a Z-Mike 1102 (Beta Lasermike) or a Compumotor 6104 (Parker)?

Similar Messages

Maybe you are looking for