Does anyone run VPC and Quicken for Windows?

If you are like me, I do not think the Mac version of Quicken is good at all.
Does anyone use Quicken for Windows and VPC?
If so, how does it run?

Yes, you really have to define what your needs will be and determine if it is cost-effective and reliable enough for you. In my situation, the software (VPC) allows me to run work apps that are only available in Windows 2000 & XP. Those work fine. I can use my Powerbook for almost all my Mac and Windows stuff. The fact that I already had Quicken 2005 for Windows made it a simple matter of pulling out the disk and running the installer. That said, there are good alternatives to Quicken, such as the one mentioned earlier. I like the Mvelopes program, a web-based alternative that works well with Firefox on the Mac. I checked out MoneyDance and it looks very good, though many of my financial institutions were not listed for on-line banking.

Similar Messages

  • HT5634 HOW WOULD I DOWNLOAD WINDOWS 7 BCA FOR MY MACBOOK AIR. I HAVE PARALLELS 7 FOR MAC AND WANT TO RUN QUICKEN FOR WINDOWS

    Which systems of Windows 7 do I download for my MacBook Air?  I have OS 10.8,5  I installed Parallels 7 for Mac and would like to run Quicken for Windows.

    You can run Windows 7 in Parallels. You do not need to run Boot Camp Assistant to install Windows if using Parallels. Visit the Parallels site for instructions regarding running Windows in Parallels.

  • Outlook 2007 doesn't show icloud service running.  Does anyone know what the dll for this service is so it can be manually added to outlook?

    Outlook 2007 doesn't show the icloud service running in Windows 7 within outlook.  Does anyone know what the dll for this service is so it can be manually added to outlook?   I've installed the icloud control panel app and set it up to synch everything, but after initially downloading my icloud calendar, it won't process any calendar updates (new entries made on either iphone 4 on ios 5 or outlook). 
    So since the control panel installed, but the service doesn't show running in outlooks "trust center" add-ins list, anyone know the actual dll file it would point to so I can see if I can add it the hard way?

    I had the same issue and figured it out.  First you have to start Outook as administrator.  To do this, shift and right-click on outlook and click run as administrator.  Next you need to enable Hard-disabled add-ins:
    Hard-Disabled Add-Ins
    Hard disabling can occur when an add-in causes the application to close unexpectedly. It might also occur on your development computer if you stop the debugger while the Startup event handler in your add-in is executing.
    To re-enable an add-in
    In the application, click the File tab. 
    Click the ApplicationName Options button.
    In the categories pane, click Add-ins.
    In the details pane, verify that the add-in appears in the Disabled Application Add-ins list.  The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
    In the Manage box, click Disabled Items, and then click Go.
    Select the add-in and click Enable.
    Click Close.
    Then you need to activate it. 
    To re-enable an add-in
    In the application, click the File tab.
    Click the ApplicationName Options button.
    In the categories pane, click Add-ins.
    In the details pane, verify that the add-in appears in the Inactive Application Add-ins list.  The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
    In the Manage box, click COM Add-ins, and then click Go.
    In the COM Add-Ins dialog box, select the check box next to the disabled add-in.
    Click OK.

  • Firefox is slow to shutdown and therefore cannot open again for a few minutes or a restart.This is on 2 different PC's 1 running XP and the other Windows 7.Could you throw some light on this problem Thanks

    Firefox is slow to shutdown and therefore cannot open again for a few minutes or a restart.This is on 2 different PC's 1 running XP and the other Windows 7.Could you throw some light on this problem Latest version running Thanks

    Please see this article: [[Firefox hangs]]

  • I don't see the AirPlay button on the bottom right of my iTunes (v 10.6.3) window. Does anyone know why and how I can set it up? Thanks!

    I don't see the AirPlay button on the bottom right of my iTunes (v 10.6.3) window. Does anyone know why and how I can set it up? Thanks!

    You do not have to have an Apple TV, but you should have an AirPlay capable speaker on your network.

  • Does anyone now a good mirror for pacam current and extra?

    does anyone now a good mirror for pacam current and extra?
    i live in sweden so does someone now a good nmirror how is fast to download from?

    Hi. I live in Poland. I'm currently using ftp.archlinux.de. It's quite fast and up to date. I was using ftp.tu-chemnitz.de before. Also archlinux.creativa.cl works (or at least worked last time I checked) very fast for me.
    The perl script above uses netselect package so If you don't like letting some script messing with your pacman.conf You can use It directly :-). You can try mtr too (it has both gui and cli and more or less combines traceroute with ping).

  • Does anyone know the default size for 24 in. imac display?

    I inadverently changed the display size on my 24 inch imac. The font in the toolbar at the top of the desktop is larger than I want. Also, when I open windows in different applications, they open larger than the display and have to be downsized in order to see the entire window.
    Does anyone know the default size for this display? Or is there a different way to fix my issues?
    thanks in advance.

    Hi Napamike2: The default setting for the 24" is 1920X1200. If that doesn't get you back to the proper display, maybe you have accidentally activated "Zoom". To check go to System Preferences, Universal Access. Check that Zoom is turned off.
    Stedman

  • Can Quicken for Windows work on a Mac w/Lion installed using Parallels?

    I've never used Parallels but am panicking with the phaseout of the already anemic Quicken for Mac 2007.  Has anybody used the more powerful Windows version of Quicken on a Mac through Parallels or some other PC emulator?  And will it work with Lion?
    Appreciate whatever help you can provide.

    Many people run Windows on their Macs for just such reasons, and while I have not myself run Quicken for Windows, I've seen a number of reports from people who do and they've reported no problems that one would not encounter on a standard Windows system. The latest version of Parallels is working fine for me under Lion.
    There are also other banking applications that do work on Lion, iBank 4 as an example, and at least some of those can import Quicken files. And of course there's Quicken Essentials for Mac, if that limited feature set would work for you. So you have several options for replacing Quicken for Mac.
    Regards.

  • Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems

    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032

    jackg032 wrote:
    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032
    Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop.   You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
    Windows 7 was billed as the first MS OS to need less system resources than its predecessor.  If your system hardware will support 64bit, then consider paying $90 for an OS upgrade  What is your system out of interest?  I have a feeling you are running with just 2Gb RAM, which just isn’t enough.  Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

  • Does anyone know if the beta for iMessage is down

    does anyone know if the beta for iMessage is down

    Hi,
    Can I check the following ?
    You have people in your Address Book with iPhone Numbers and/or Apple IDs listed ?
    In Messages beta you are starting with a "New Message" either from the File Menu or the icon on the top of Messages main window ?
    With a "New Message" showing you are using the blue icon that appears top right
    In this Menu drop down you are selecting Contacts and then a person from the list ?
    You are selecting this person on their iPhone or Apple ID that you know they use in iMessages ?
    You are saying that their name goes red when it is in the "To" Spot.
    Pic of a Name that has gone Blue
    Uploaded with Skitch!
    Messages may or may not have the little Speech bubble next to a Contact point as it can depend where you are in your Sync process and which Contacts you have already had.
    If the contact goes Red it could be that an email you are using is NOT an Apple ID, or it has not been linked to iMessages yet.
    It could also be that they are out of range in one form or another.
    Messages can't tell which Numbers are iPhone Numbers until the other person has Registered/Linked it to thier Apple ID or you have contacted them.
    I have had issues where In my Mac's contact List I keep only the "Local" phone number where Messages Needs the +(Country code)  bit as well.
    10:14 PM      Saturday; June 2, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Hi, I have purchased an audio book on iTunes from an iMac and it does not show up on the cloud so I can't download it on my iPhone. Does anyone know why and how I can proceed to transfer the audio book purchase?

    Hi
    I have purchased an audio book from iTunes with my iMac.
    Now I wanted to listen to it on my iPhone so I proceeded to transfer the purchase and looked for the book in the purchased section of the store in the iTunes on my iPhone but it did not show up.
    Does anyone know why and how I can transfer the audio book purchased on my iPhone so I can listen while away from the desk?
    Thank you,
    Sanya

    Can you find the audio book by using the Search feature on the iPod?
    Do you have the right boxes checked to sync the audio book to the iPod?
    iTunes: Syncing media content to iOS devices and iPod
    Note you have to check the boxes in Books pane for the iPod in iTunes to sync books in general and another box to sync Audio Books.

  • Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.

    Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.
    Setup includes CUCM9.0, Unity Connection 9.0, Presence 9.0....
    steps taken to configure(and results acheived)
    1-users created locally on CUCM and Enabled for IM and Presence.
    2-able to login to clients (CUPS7/8.6 and Jabber) but getting error Voicemail Error. The server has rejected the provided credentials. [1903]
    in order to verify there is nothing wrong with the credentials...i checked on unity and i am sure it's the PIN(12345) i need to use .
    Can Anyone help me out here...Thanks in advance.

    It's not looking for your PIN - that is only used over DTMF-based interactions - it's looking for your CUC password. If the mailbox is synced from LDAP and you have LDAP Auth enabled on CUC, then this would be your AD password. If it's synced over AXL, not synced at all, or LDAP synced but without Auth, then there will be an alphanumeric password field on the mailbox under Edit > Change Passwords.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Does anyone know the pricing structure for Digital Marketing Suite?

    Does anyone know the pricing structure for Digital Marketing Suite? I asked for info but no one ever got back to me. I don't want to waste anyones time if it's too expensive so I'd like to know up front what the fees/package rates are.
    Thanks.
    Peter Marino
    Owner of an
    SEO Comapny in NYC

    This is the top story at this writing at AppleInsider:
    Like the updated mid-2014 13-inch MacBook Pro with Retina display, Apple's latest 15-inch notebook brings slightly speedier Intel processors. But with memory, graphics and design all carried over from last year, the most substantial change is a $100 price cut.
    http://appleinsider.com/articles/14/09/07/review-apples-mid-2014-15-inch-macbook -pro-with-retina-display

  • How do I convert Quicken for Windows files to Quicken Essentials?

    I have a large Quicken for Windows investment account on a virtual PC at my old office that I need to transfer to Quicken for Mac at my home.  I only want to transfer the investment information and do not use Quicken for banking.    I have installed Quicken Essentials on my Mac. I have the info that needs to be transferred on a disk.   Please advise any hints/suggestions to make sure all the data is transferred.   Thanks.

    Quicken is not an Apple product. I suggest you post your question on the Quicken forums since it's their software you're wondering about.
    https://qlc.intuit.com

  • Does anyone know the part number for the printhead for the HP Officejet 6500a

    My printer doesn't print, initally it didn't print black, then I soaked the printhead in hot water as instructed now it doesn't print at all, so I need to replace it.  Does anyone know the part number for the printhead for the HP Officejet 6500aThank You,

    Hi Temprosal,I looked up the product specifications for the HP Officjet 6500a.Here are steps for ordering a new printhead: These steps apply to the United States only.If HP replaces your printhead assembly under warranty, you receive a new printhead assembly, cleaning materials, and a full set of new ink cartridges.If your printhead assembly is no longer under warranty, you can purchase a new one online.Go to the HP Parts Store website (in English).  https://h20141.www2.hp.com/Hpparts/CountryChoice.aspxUnder Find your part(s), type CN643A in the Search by part number text box.Follow the on-screen instructions to order the printhead assembly.Jean

Maybe you are looking for

  • How to stop the thread?

    Hi, How to stop the thread in java. This is my program. import java.net.InetAddress; public class ThreadPing extends Thread {      ThreadPing(String pingIP)           super(pingIP);           start();      public void run()           try           St

  • How to access java arraylist from xslt v1?

    Hi everybody, I have a problem using xsl trasformation and an object that contains nested arraylistes. the object is structured in this way Request |---id |---event |---ListOfComponent |------*<List>component* |---------idComponent |---------descript

  • Network Chat for Mac AND Windows

    Hey there Is there an chat app for mac that works on windows as well?? Like iChat can support bonjour but is there a similar app for windows that works with iChat?? THanks Luke

  • How do I get my panels to display?

    Hi, I've written this code to display 4 panels but nothing apart my title bar is appearing, I know it;s something minor. I appreciate your help, thanks, fiona import javax.swing.*; import java.awt.*; import java.awt.event.*; import java.awt.Color.*;

  • SHUTDOWN ABORT in ORACLE 10g

    Hi, I wrote a procedure to be run before reinstalling a database. As I am not interested in rolling back, or waiting for transactions to finish, I am using SHUTDOWN ABORT to drop users. Everything works well in ORACLE 9i but it cannot restart in 10g