Does anyone understand Security settings for Portfolios??

Thanks, Philip, you answered part of my question. I'm still searching for a way to keep people from printing or editing my artwork I place in the portfolio I'm building in Acrobat. Anyone's help would be greatly appreciated. I can't seem to find any specific information, at least none I can understand, on this simple problem.
Using Adobe Acrobat Pro 9.1.3 on a Mac. Creating a portfolio of my artwork to either burn to cd or email. I want the recipient to ONLY be able to VIEW the artwork, not print or edit. I do not understand the Security settings, and I have read the section on Choosing a security method. Still confused. After going to File> Modify PDF Portfolio> Secure Portfolio..... what do I choose in all the Security settings? I'm sure some of the people viewing the portfolio will have a full version of Acrobat, and not just the reader. Please help or advise where I can find more online help for this simple problem. Thanks.
Bgin_Agin_OK

As for editing art work you can do the as I suggested with layer with Opacity set to 1% then Flatten That will prevent (Or should) the editing art work.
AS for locking preventing printing and editing You can set that inTools > Security settings (then password protect).
Note Security is fairly easy for anyone to evercome. There are bunches of programs out on the net to do just that.
Most Honest, Ethical, persons will abide. But there are I am afraid in today's world little of that left. So there is better than 50/50 chance your stuff will be swiped.I would not dream of doing such, except if it was one I created, I set password on, and forgot the password.
When I was growing up, when I was about 7, I picked up a pencil in a 5&10 cent store and when my mother found it when we got out the door she marched me back in , told me to give the pencil back, and applogize. Then when I got home my bottom was smoked. I still remember my backside smarting all these years. I would no more steal anything. than I would try to kill someone. Just not in my nature.
In todays world if a kid did similar, the parent is more likely shrug it off, or ask the kid how they got away with it , show and ask them how.
A sad comentary on the world.

Similar Messages

Does anyone know the settings for apple mail on mountain lion?

does anyone know the correct settings for apple mail?

Configuring Mail for your email account (OS X v10.5 and later)
Apple - Support - Mail Setup Assistant
Mac 101- Mail (OS X Mountain Lion)

Palm Pro on AT&T I can't access internet, anyone have ATT settings for internet?

So I have a new PALM PRO, I love it so far. HoweverI can't access the internet when out and about. Only on WIFI. I have the H showing it's receiving a data connection, however the device won't connect to the internet. If I click internet explorer, it's a white screen, if I click my www.skyfire.com browser, (which I love) it says trying to get a connection etc. So, I called ATT, they don't have the PRO in their system yet and could only help so much. DOES ANYONE have the settings for ATT so I can put them in, proxy, etc, whatever needed to make a internet connection to my wireless provider? (ATT)
THANKS!
Post relates to: Treo Pro T850U (Unlocked)

So I have a new PALM PRO, I love it so far. HoweverI can't access the internet when out and about. Only on WIFI. I have the H showing it's receiving a data connection, however the device won't connect to the internet. If I click internet explorer, it's a white screen, if I click my www.skyfire.com browser, (which I love) it says trying to get a connection etc. So, I called ATT, they don't have the PRO in their system yet and could only help so much. DOES ANYONE have the settings for ATT so I can put them in, proxy, etc, whatever needed to make a internet connection to my wireless provider? (ATT)
THANKS!
Post relates to: Treo Pro T850U (Unlocked)

WRT54GP2 security settings for HP Ipaq 111 handheld

I have a home wireless network, using a Linksys WRT54GP2 wireless router. I'm trying to secure the network, with has 3 wireless systems, my home PC, a notebook, and my Ipaq 111. I can get my home PC and the notebook to work when I setup the WRT54GP2 router using Authentication: WPA-Pre-Shared Key and Data Encryption: TKIP, but the Ipaq 111 will not even see the router with any security setting. When the security settings for the Linksys Wireless Router WRT54GP2 are disabled the Ipaq 111 sees the router and connects to the internet.
The HP Ipaq 111 handheld has the following security options: Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK. Data Encryption: Disabled, WEP, TKIP, AES.
Does anyone have any ideas of how to get the Ipaq 111 to work on the secured Linksys WRT54GP2 router?
Thanks for any help.
John

On your Router setup page, Click on the Wireless tab and below change the Wireless Channel to 11-2.462GHz and click on Save Settings, then click on the Sub tab Advanced Wireless Settings and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect to it on your Ipaq.

WRT54GP2 security settings for a HP Ipaq 111 handheld

I have a home wireless network, using a Linksys WRT54GP2 wireless router. I'm trying to secure the network, with has 3 wireless systems, my home PC, a notebook, and my Ipaq 111. I can get my home PC and the notebook to work when I setup the WRT54GP2 router using Authentication: WPA-Pre-Shared Key and Data Encryption: TKIP, but the Ipaq 111 will not even see the router with any security setting. When the security settings for the Linksys Wireless Router WRT54GP2 are disabled the Ipaq 111 sees the router and connects to the internet.
The HP Ipaq 111 handheld has the following security options: Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK. Data Encryption: Disabled, WEP, TKIP, AES.
Does anyone have any ideas of how to get the Ipaq 111 to work on the secured Linksys WRT54GP2 router?
Thanks for any help.
John

What is the model no of the Wireless Adapter you are using on the HP laptop...?
Have you tried updating the driver for the adapter...?
Try to adjust the wireless settings on the router...Open the setup page and Under the Wireless tab,Change the Network Mode to mixed...Keep the Wireless Channel on 11-2.467GHz and click on save settings...Under the Advanced Wireless Settings, Change the Beacon Interval to 50,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...

Security Settings for more

I saw this on a site that has many users in Iran
This setting does not harm anyone to use and useful
Or not.
Security Settings for more I With a simple trick for the Firefox browser you can always Certificate of forged and stolen check in Amman Even if all the fake certificate to get It is mentioned in the ability of the default browser is Chrome
[IMG]http://i56.tinypic.com/2hxp0jo.jpg[/IMG]
(My choice when ocsp server connection fails, treat the certificate az invalid The chrome is not activated in your browser, you can enable this option, none of the sites Sites such as the bank's internal pull Vardsh Nmytvnyd) Message to your browser if the connection is untrusted or ocsp error gave me a few times to retry This message was repeated again Mlvmh Jlyh site certificate Gmail did not do anything and sit in. I think what Yahoo's Site of the National Bank The fake site, your freedom The main site of your freedom
2. Firefox and Chrome browsers, by default the system uses rc4 128 bit encodings The system according to security experts, is one of the weakest systems encodings I will use it only for high speed One of the reasons that the wep hack wireless internet use Hmynh But unlike wireless Internet connections that use wpa2 aes encodings system In theory you could perform any For more information, read this article I did not find any option in Chrome that I can disable this feature To disable this option in the Firefox browser, do the following operation about: config Type I rc4 All of the following options to make false Tqyyr
[IMG]http://i51.tinypic.com/mbr51i.jpg[/IMG]

Check the file /etc/pam.d/sshd and /etc/pam.d/login.
Adjust the entry auth required pam_tally2.so deny=5 onerr=fail, as needed.
Modify deny= to the number of allowed failed attempts.
Refer to Mos Note 1269133.1 for details.

Query security settings for users

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?

I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them?

HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

Does anyone have corrective advice for me to follow? In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message: The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1). Thanks, A

Hi everyone
Does anyone have corrective advice for me to follow please?
In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message:
The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1).
Thanks,
tooborac1

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

Does anyone have any suggestions for Ad blocking? I'm getting a lot of pop up ads while using Facebook from Safari.

     I'm getting a lot of pop up ads. mostly while using Facebook. I'm running Safari on a Macbook Pro running Yosemite. Does anyone have any suggestions for an Ad blocker. I don't see anything in the App store.
      I can't swear to it but I don't recall this being a problem pre-Yosemite. I could be wrong. I haven't been real active on Facebook until recently. I see some third party apps out there but am alway wary of non approved software.
     Thanks
     Ron

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I am using photoshop cc 2014.2 And when I use save for Web it gives me a dialog box that says it is using Latin characters I've never seen this before. Does anyone have an answer for this problem or do I need to go back to the older version of Photoshop.

I'm using Photoshop cc 2014.21 I you save for Web and dialog box comes up that says that Photoshop is using Latin characters and that servers cannot recognize Latin characters in webpages and you may have trouble viewing these pages does anyone have an answer for this problem?

What Firefox version is currently installed on the computer?
You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Java WebDynpro's and IE security settings for file download

We have a EP 7.0 SP13 environment on which we have deployed a number of own developed java webdynpro's. In some of these webdynpro's we provide the file download functionality. The portal and webdynpro's are used by both internal personnel and external customers.
On the other hand the default Internet security settings for Internet Explorer, disable "Automatic prompting for file downloads".
When a user, with these default security settings active, tries to use our webdynpro's file download functionality, the screen seems to refreshes but no file download starts. When (s)he retries, the session runs for some minutes and gives following error message:
"com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_20 failed to acquire exclusive lock on client session ClientSession".
This behavior is explained in SAPNote 1234847. Webdynpro provides a single-thread module, meaning a user session is blocked for the during of the request. And because the previous file download isn't yet completed the new try can't start.
Issue now, although the users IE settings allow file downloads and don't block pop up's, he can't download the file and even isn't made aware of the cause of the failure.
How can we avoid this issue, without having to communicate the
application requires specific browser settings?

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5290
You can install the program using different ways:
1. Right-click the application installer and choose Open.
2. Go to System Preferences > Security and Privacy and select Anywhere in Allow applications downloaded from

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

Does anyone understand Security settings for Portfolios??

Similar Messages

Maybe you are looking for