Does anyone use "Transmit" as their FTP program

If anyone knows how to use "Transmit" to upload a web site, perhaps you could give me some assistance, since I cannot locate a manual for "Transmit."
Thanks
<Edited by Host>

Google has a plethora of useful sites one of which is this one:
Configuring Transmit 4 (3rd Party App) on Mac OS X
Have you looked at the Transmit Help File? It has a number of sections which can help you like:
Synchronizing a local and remove folder
Working with connections and favorites
The basic information you need, provided by your host support personnel, is the server address, your customer name and password and the protocol to be used:
Plug those into a new "Favorites" window and you should be ready to go:
Using the more options section of that window you can locate the folder holding your website on your hard drive
This is what you get:
Just copy from window on left to window on right or use the Sycn button at the top.
OT

Similar Messages

HT1296 Does anyone uses optonline as their email service provider?

If anyone uses optonline as their email service provider, do you have a problem with your MacBook Pro synching emails with the Optimum server? For example, when I delete an email from my inbox on my MAC Book, it does not delete the email in the inbox on the server. I just bought an iPhone: when everything synch's through iCloud, all the messages from the Optimum server are on my iPhone versus the messages from the inbox on my MacBook. Anyone have any suggestions? Thanks very much

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Does anyone use Xfinity for their home Wifi?

If so, is yours very slow? Xfinity advertises lightning speeds but I am not getting anything close to fast! Please help!!

I have Xfinity and it works fine. Have you called Comcast? Are you only experiencing slow speeds on your phone or on all devices? On my iPhone, my Wifi was a slow so I did a full reset of my internet and then reset my phone's network settings. This seemed to speed things up.
To reset internet:
Unplug wireless router electricity and then follow the below steps. If you have phone service and your modem is also used for phone, it has a battery so you have to hit the reset button, you cannot just unplug its electricity:
Cable Modem Users
Reset your cable modem by pressing and holding down the reset button, located on the front or back of your modem, for five seconds. If there’s no reset button, then power cycle your modem.
To power cycle your modem:
Shut down your computer.
Unplug the cable modem from the electrical outlet.
Wait 10 seconds, then plug the cable modem back into the electrical outlet.
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
XFINITY Internet & Voice Modem Users
Shut down your computer
Find the reset button on the back of the unit.
Use a pen or any pointed, non-metallic object to press the reset button until you see the lights on the front of the unit go off.
Release the reset button and wait for the unit to cycle up (this may take up to five minutes).
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
Reset phone's network settings.

Anyone use STARLOGIC as their host?

Hello does anyone use startlogic as their host?
I just signed on with them and I cant get dreamweaver to
hookup to the site via FTP. Does anyone know how to do this
successfully?
I already tried and I keep getting an error that says the
folder doesnt exist or it says there could be a permission problem.
Its very frustrating. Startlogic told me its an "adobe problem", so
if anyone knows how to setup dreamweaver via FTP to thier site,
please share!!!
Thank you very much.

Access FTP of course, should have mentioned it anyway
Jo
"josie1one" <[email protected]> wrote in message
news:fiorr8$2h9$[email protected]..
>I have an account with them - and as Alan suggests, they
use public_html.
>In my site definition remote server info I have:
>
> FTP host: st52.startlogic.com
> Host directory: /public_html/ << note essential
slashes
> Login info: - whatever they gave you
> Password: whatever - it might not be exactly what you
chose - they knocked
> off the last character on mine so it's worth checking
the correspondence
>
>
> --
> Jo
>
>
> "texjgc" <[email protected]> wrote in
message
> news:finek5$e9s$[email protected]..
>> Hello does anyone use startlogic as their host?
>>
>> I just signed on with them and I cant get
dreamweaver to hookup to the
>> site
>> via FTP. Does anyone know how to do this
successfully?
>>
>> I already tried and I keep getting an error that
says the folder doesnt
>> exist
>> or it says there could be a permission problem. Its
very frustrating.
>> Startlogic told me its an "adobe problem", so if
anyone knows how to
>> setup
>> dreamweaver via FTP to thier site, please share!!!
>>
>>
>> Thank you very much.
>>
>
>

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do. You would connect and use it the same as a G-Drive.
Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time. The conflicts usually appear as either dropped frames or a complete freeze. This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders. (The problem is the camcorder's FW implementation, not the hard drive.) The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

What sustain pedal - exact make, model, type (momentary) is anyone using successfully on their controller? (I'm using m-audio)

what sustain pedal - exact make, model, type (momentary?) is anyone using successfully on their keyboard
? (I'm using m-audio controller)

I took an old Guitar cable, snipped off one plug, connected strand one to a metal plate and strand two to the metal part of a weighted lever. Plug it into the sustain port of my midikeybs. Press the lever onto the metal plate: sustain on. Let go: sustain off.
Even simpler: take a cable with a (mono) plug at on end and the naked two strands (mantel & core) on the other side. If you connect the two strands: sustain! if you disconnect the strands: sustain off.
What I am trying to say is: a sustain pedal is as simple as a doorbel button: on or off. So all that "the maker" can provide is "built quality", but really, any improvised simple momentary contact switch will do. In other words: there's really NO electronics to it, and if it is sold as a MIDI sustain pedal, it 'll work. But a doorbell button connected to jack cable will also work, so make and model (for a pure sustain-only pedal) are irrelevant.

Does ANYONE know whats wrong with this program?!?!

Hey(again),
Does anyone know whats wrong with this program?:
public class FloatingNumbersTest
public static void main(String args[])
float float1 =50.0f;
float closeFloat=0.001f
float farfloat=100.0f
if (float1<=closeFloat)
System.out.print("Float1 pretty close to zero");
if (float1>=closeFloat)
System.out.print("Float1 is near 0");
if (float1>=farfloat)
System.out.print("Float1 is not even close to zero!"0
}There has seemed to be 5 errors!

public class FloatingNumbersTest
public static void main(String args[])
float float1 =50.0f;
float closeFloat=0.001f
float farfloat=100.0f
if (float1<=closeFloat)
HERE System.out.print("Float1 pretty close to zero");
if (float1>=closeFloat)
System.out.print("Float1 is near 0");
if (float1>=farfloat)
System.out.print("Float1 is not even close to zero!"0
}you're missing the opening { for the first if.

TS1702 Does anyone have problems on their iPad with the Pinball HD Collection freezing up on the screen regularly.as I am having it happen and it's annoying to cancel and reinstall.

Does anyone have problems on their IPad 2 with an app called Pinball HD Collection freezing up on a regular basis and I then have to remove the app and then reinstall it. Most frustrating

Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????

Cisco 7921 - Does anyone Use EAP-TLS in their VoWLAN Deployments?

Hi Guys,
I am looking at making a technology decision, in regards to VoWLAN and authentication.
For our Data Deployment, we use EAP-TLS with a PKI infrastructure and ACS. The ACS passes fields from the certs to AD for verification.
Can I do exactly the same for the Voice Deployment?
Has anyone used EAP-TLS with Voice? Are there any problems? Or should I just go ahead and get some certs minted for the phones, setup some AD accounts and whey hey, its time to party?
Many thx indeed,
Ken

Hi Michael,
So looking at the deployment guide, this is worded (imho) in a confusing manor? Sorry.
CCKM is listed under authentication, where i though CCKM is an authentication "key managment" protocol?
It also says 802.1x authentication with AES encrytion, under the authentication heading?
It says eap-tls, should this not say 802.1x eap-tls or collapse this with the 802.1x authentication?
ahh, when it says 802.1x, does that mean 802.1x dynamic wep?
Would it be correct to say, that I want to use 802.1x eap-tls with tkip and CCKM?
Sorry, this hurts :)
Thx,
Ken
Wireless Security
When deploying a wireless LAN, you must provide security. The Cisco Unified Wireless IP Phone 7921G supports the following wireless security features.
Authentication
- Cisco Centralized Key Management (CCKM)
- 802.11i (802.1x authentication + TKIP encryption)
- 802.11i (802.1x authentication + AES encryption)
- 802.11i (Pre-Shared key + TKIP encryption)
- 802.11i (Pre-Shared key + AES encryption)
- Extensible Authentication Protocol - Flexible Authentication via Secure Tunneling (EAP-FAST)
- Extensible Authentication Protocol - Transport Layer Security (EAP-TLS)
- Protected Extensible Authentication Protocol (PEAP)
- Lightweight Extensible Authentication Protocol (LEAP)
- Open and Shared Key
Encryption
- Advanced Encryption Scheme (AES)
- Temporal Key Integrity Protocol (TKIP) / Message Integrity Check (MIC)
- 40-bit and 128-bit Wired Equivalent Protocol (WEP)
Cisco Centralized Key Management (CCKM)
When using 802.1x type authentication, you should implement CCKM for authentication. 802.1x can introduce delay during roaming due to its requirement for full re-authentication. CCKM centralizes the key management and reduces the number of key exchanges. Also, WPA introduces additional transient keys and can lengthen roaming time. TKIP encryption is recommended when using CCKM for fast roaming as CCKM does not support AES currently.

Does anyone know how to resolve FTP connection issues?

I am receiving an FTP error in connecting to anything and I need help figuring out why? I used to be able to connect to godaddy and then all of a sudden it stopped connecting. I tried the proxy settings and turning of my virus protection, but nothing works. In the help area, I tried to connect to dreamweavers ftp example site, but that connection failed also. I am getting a connection timed out response after about 10 seconds and it says I can not make connection to host.
Does anyone have any other possible solutions? I am thinking of uninstalling the program and reinstalling it just to see if that works, but I would rather not do that. Thank you

Does this happen with all projects, specifically the sample projects? Click Open on the RoboHelp Starter page and then click Samples in the ribbon on the left.
If it does, then it might be quicker overall to just uninstall and reinstall.
Otherwise post back.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Black Berry Messenger, using & finding other users, Does anyone use the B Berry Messenger ?

Does anyone else USE or have the Black Berry Messenger on their 8330 CURVE model B Berry ? If so, r u social enuf to wanna meet other B Berry users ONLINE and How do I find other Black Berry Messenger users to communicate / chat with directly ? My BlackBerry e-mail address is :[removed personal information] thank U in advance. I have had my phone only about one week or so and am definitely in the "LEARNING CURVE" about it ! Thanks again ! Sincerely Charles in Norfolk,Va. USA
Message Edited by dany_s on 01-26-2009 01:09 PM
From the Black Berry of Charles W. Merritt
Solved!
Go to Solution.

cwm1955 wrote:
Dear Mr. XANDREX I have already read alot of the "HELP" documentation on my device. NONE of it covers ANY of my three (3) issues here! My issues are ADVANCED and the HELP documentation is meant for a VERY 101 BASICS beginner. I am really looking for help here, your response did NOT help me ! While I thank U for your valuable time in responding, NO THANK U since U did NOT help me ! I WANT SOMEONE THAT REALLY HAS KNOWLEDGE OF MY ISSUES and how to REALLY HELP ME !People if U cannot REALLY POSITIVELY ASSIST me with REAL ANSWERS to my REAL ISSUES , please DO NOT WASTE MY VALUABLE TIME AND YOURS AS WELL! THANK U ALL IN ADVANCE ! Sincerely CHARLES
Wait, Sir Charles.
1. The two of us have offered you very valuable adivce, which you indicate in both cases you wish to ignore.
2. You have NOT mentioned any issues in your first post here other than you wish to be social, and now in your second post that you don't know how to add contact and wish me to email you directions. I don't give personal service, as a volunteer I answer questions right here in the threads.You'll just have to suffer through asking questions right here. It's a great forum where thousands of users have gotten help. And often, quite speadily as well.
3. Your last post is quite rude to a user who has spent lots of time helping users out around here, and quite honestly your words are uncalled for. Your ALL CAPS typing is considered yelling on internet forums such as this. No one likes to be yelled at. My mother taught me about gathering flys with honey rather than vinegar. You might try some honey yourself.
4. Adding BBMessenger contacts. Open BBMessenger > Menu > Add Contacts. Enter either the PIN of the other user you desire to add, or their email address. IF THEY are already on your BB Address Book, you can enter their name there. Follow the prompts you are given.
Message Edited by JSanders on 01-26-2009 08:30 AM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does always using Force Quit to close programs make problems w/computer?

A friend was over and we were working on my iMac, and I used force quit to exit a couple of programs - and he gasped and said "Don't do that! It will cause problems with your machine!"
He sort of said something about directories - but ultimately I didn't understand why using force quit isn't the same as just closing, or why it would hurt my computer... Does anyone know?... My machine is running slow and has some quirks and I need to do a clean install because a system reinstall didn't help much. But I've also been downloading demos and trials right and left since I got it - which I've just found out is not a great idea and I've found out how to fix it from another forum.
So I don't know if what my friend says is true because I know I've done so many other weird things to my poor iMac out of sheer ignorance that it could be anything......
Is he right? Why wouldn't they give us that warning?
thanks -
maggie

The only time you should use Force Quit is when the application cannot be quit normally.
Why don't you just Quit the application?
Force Quit is not a good idea as all id does is stop the application very abruptly, it does not close down files properly or write away preference changes or any other items that should be written to the disk by the application. You stand a very high risk or corrupting the application, documents or your operating system by using Force Quit, especially when there is no need to do so.
Ian

Does anyone use a Celluar Travel Router for wifi connecton?

Hi!
I did some further research into this and you can have access to cell phone networks to create a wifi connection for the iPod Touch.
Does this really do the trick with having constant wifi when you're traveling or on the go?
Any advice would be great!
Thank You!

Yes, you do need to have a cell account and cell data plan for this to work.
I want to know if anyone uses this feature to create their instant wifi Hotspots?
Thanks!

TS3276 PostBox and iCloud - does anyone use pop mail for postbox and icloud? i can't seem to use my MAC pop mail with postbox.

Apple policy of reseting each time you forget an Account ID or Password makes it impossible for me to keep track of my many accounts on Mail. I decided to use PostBox and it's working great except for one account. That account is linked to icloud. I'm not too happy with icloud, in general, but I do want to be able to track my mail on my iphone for that one account (my business account). It used to be that I could use 2 accounts with one - using an alias. Now, I can't do that with icloud, nor can I get it linked to PostBox. Does anyone know what I should do? Am I asking the wrong questions?

I am now on Chapter 3 & 4 - Since this is the ONLY message board I can get into,
& Roger, No, I never had a "mobile me account", if that's a cell phone - wouldn't own one! - IF it was from the Old Tiger mail Ap, I do believe it was discontinued, when they came out with Snow Lion, no? So that's defunct. FYI I got my first computer in 1991 - DOS, good stuff, easy to fix. My first mac in 2006 Tiger, great stuff, loved it. Then Snowleopard, not sure when, maybe '09? it was just before Lion came out, didn't know the new one would come so soon. & in June 2012, first mac crashed, lost a year "unsaved" data.
Q # 1. I can't get into My Account - to get into support & any questions! Somehow all my data is messed up, & I've had to change passwords 3 times today every time I'm "rejected" by my account. I seem to have 3 accounts now, each with a different name Password, & Security Questions! & I've been rejected due to: "Incorrect ID name", "Incorrect Password" & because whatever - doesn't" recognize my birth date" / or "my Security question answers" that I chose - all of which I know are correct. AGUH!
My latest problems:
1) Can you Unzip iPhotos, uploaded from a USB or External Drive (after my SL crashed)? The dpi for these old ones is about 250 x 360 (88 KB) compared to 2448 x 3264 (2.6 MB) for recent ones.
- Do you need a program to do this? Some say there's a "free" program, any good? Can unzip be done to many or 1 at a time? Or is there something I haven't found in iPhoto '11, 9.2.1 (Lion)?
[I now buy new Camera Memory cards & don't delete the photos anymore, since I lost so many.]
2) Can I combine all 3 of my Apple ID info - or at least delete that 4 year old Email address in my profile? (IF I can ever get in. I wrote a "suggestion" to the Apple folks, who said my new Email was on it, & they'd send me an email - but I never got it, guess it went to the old one?

Does anyone use Framwork POs for WBS and Asset management.

We have had issues before with trying to use Framework POs for Assets. I wanted to know, does anyone out there use the Framework PO for the creation of Assets with charges going to WBS elements? Do you track service charges as well as material charges that are purchsed for Assets?

For PO, WBS, Asset frame work below is the sample
Create WBS which manage AUC
Example you will create a clinic,
Create Project - [Project Clinic]
Create WBS under the Project Clinic - [Clinic Expense]
Create AUC under WBS Clinic Expense - [Clinic under Construction]
Let say you purchase Paint for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 1000 USD)
Let say you purchase Wood for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 2000 USD)
During month end you can settle the amount to AUC (tcocde CJ88 - Settlement type - Automatic)
All charges to WBS will go to AUC
Once construction of clinic is finished and is ready to use, you need to settle all the amount from WBS to AUC (through settlement)
Then create Fixed Asset [Clinic Building]
Then settele the AUC [Clinic under Construction] charges to Fixed Asset [Clinic Building] through CJ88 settlement type - Final settlement
Thanks!
Jhero

Does anyone use "Transmit" as their FTP program

Similar Messages

Maybe you are looking for