Does anyone use Xfinity for their home Wifi?

If so, is yours very slow? Xfinity advertises lightning speeds but I am not getting anything close to fast! Please help!!

I have Xfinity and it works fine. Have you called Comcast? Are you only experiencing slow speeds on your phone or on all devices? On my iPhone, my Wifi was a slow so I did a full reset of my internet and then reset my phone's network settings. This seemed to speed things up.
To reset internet:
Unplug wireless router electricity and then follow the below steps. If you have phone service and your modem is also used for phone, it has a battery so you have to hit the reset button, you cannot just unplug its electricity:
Cable Modem Users
Reset your cable modem by pressing and holding down the reset button, located on the front or back of your modem, for five seconds. If there’s no reset button, then power cycle your modem.
To power cycle your modem:
Shut down your computer.
Unplug the cable modem from the electrical outlet.
Wait 10 seconds, then plug the cable modem back into the electrical outlet.
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
XFINITY Internet & Voice Modem Users
Shut down your computer
Find the reset button on the back of the unit.
Use a pen or any pointed, non-metallic object to press the reset button until you see the lights on the front of the unit go off.
Release the reset button and wait for the unit to cycle up (this may take up to five minutes).
Unplug your router from the electrical outlet.
Plug your router back in.
Wait 30 seconds, then turn your computer back on.
Reset phone's network settings.

Similar Messages

HT1296 Does anyone uses optonline as their email service provider?

If anyone uses optonline as their email service provider, do you have a problem with your MacBook Pro synching emails with the Optimum server? For example, when I delete an email from my inbox on my MAC Book, it does not delete the email in the inbox on the server. I just bought an iPhone: when everything synch's through iCloud, all the messages from the Optimum server are on my iPhone versus the messages from the inbox on my MacBook. Anyone have any suggestions? Thanks very much

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Does anyone use RH7 for online help on their websites?

Hi,
I'm finding that this product isn't usable for online help
within a website. Using the RH_ShowHelp() JavaScript calling
convestions triggers popup blockers on most of the major platforms
(Windows/IE, FF, Mac/FF). I don't understand why this is happenning
since the help and the page that links to the help are in the same
domain. Requiring customers to manually reconfigure their popup
blockers is not a viable solution.
On the one where it works (Mac/Safari) I'm left with a very
tiny window in the lower right corner. Expanding it shows the help,
but the page in the content pane is the file-not-found page
(clicking items in the navigation brings up the correct page). I'm
also seeing on the Mac (FF & Safari) that the Index &
Search areas aren't searchable like they are in Windows (no input
box to search with).
When we asked Adobe about this the answer was more or less -
"that's how it works" and they gave us a link to the following page
detailing the limitations by browser (notice that it hasn't been
updated since 2004 and the newest IE is IE4).
http://kb.adobe.com/selfservice/viewContent.do?externalId=rb_69353b&sliceId=2
I was hoping there would be a new RoboHelp_CSH.js file (it's
dated 2004) Ideally one that didn't rely on browser sniffing but
instead checked for JavaScript capabilitites.
We missed testing this part when evaluating the product and
now it feels like a dead end.
Needless to say we've started moving on to other help
systems, but maybe someone can help save RH for us before we write
it off completely.

Welcome to our community, wjens
Hopefully you realize that you aren't forced to use the
WebHelp API to establish links to help.
Take a look at the following links:
Link
one
Link
two
Hopefully something here helps... Rick

Does Anyone Use Blender For 3D Video Titling? No It's Not A Food Processor!

. . . . . . . and if so, can they tell me how to make 3D titles that swivel and rotate etc. and can be put into FCP?
I downloaded Blender yesterday and after hours of struggling am completely bewildered!
I am even bewildered by the blender forums. I've posted 2 questions. One received a reply yesterday but I can no longer find it and the one I just posted has immediately disappeared into the ether!
Getting back to the app . . . . I can put titles in my choice of font on the Blender interface but I can't alter them from the default silver colour and I have no idea how to get them onto video. I don't know where I should be positioning them etc. and there is a whopping cube in the background.
It's like being able to start a car but then being incapable of driving it anywhere.
I am completely clueless . . . . and I suspect many others will also be clueless as to what I am rambling on about, but if there is anyone out there who does know what I mean, I would be very grateful for some guidance.
Incidentally, I have been told that everyone finds it impossible for 6 days, but after 7 days you suddenly become an expert. The trouble is that I won't last that long!

Thanks Kevin and Iain but I only want to dabble occasionally so there is no way I'm spending any more hard cash.
It was a demo of Kinemac that Videojam gave me a couple of days ago that kindled my interest, but when I saw the $299 price tag I started searching elsewhere.
This was my original 2 minute effort done using FCP's "Basic3D" filter which of course is not really 3D:-
http://vimeo.com/8735532
This is Videojam's ten minute job done in Kinemac:-
http://vimeo.com/8738995
Message was edited by: Ian R. Brown

Does anyone use "Transmit" as their FTP program

If anyone knows how to use "Transmit" to upload a web site, perhaps you could give me some assistance, since I cannot locate a manual for "Transmit."
Thanks
<Edited by Host>

Google has a plethora of useful sites one of which is this one:
Configuring Transmit 4 (3rd Party App) on Mac OS X
Have you looked at the Transmit Help File? It has a number of sections which can help you like:
Synchronizing a local and remove folder
Working with connections and favorites
The basic information you need, provided by your host support personnel, is the server address, your customer name and password and the protocol to be used:
Plug those into a new "Favorites" window and you should be ready to go:
Using the more options section of that window you can locate the folder holding your website on your hard drive
This is what you get:
Just copy from window on left to window on right or use the Sycn button at the top.
OT

Does anyone use iScrapbook for making scrap pages? Wanting some feedback.

I am having difficulty exporting my pages small enough for the commercial store to upload. Any ideas?

Just a word on the PDF point: Acrobat Pro can do a great deal. If you need it, you need it. If you don't need it, though, use something else. I say this not just because Acrobat Pro is expensive, although it is, but because it is also a complete pain. In, of course, my opinion.
I have and use Acrobat Pro but I only use it when nothing else will do what I need. Otherwise, I use something else. Like I say, it depends on what you need.
At the simplest level, you can create a PDF by "printing to PDF" from pretty much any application on your Mac. This is likely not enough for your needs but it is worth bearing in mind if you are not already aware of it.
I've never created an ebook so I don't know what's involved and Acrobat Pro may be what you need. Just don't assume that because it can apparently "do it all" that it is the best choice for your needs. Even if expense is of no importance, that may not be the case.
- cfr

Anyone use STARLOGIC as their host?

Hello does anyone use startlogic as their host?
I just signed on with them and I cant get dreamweaver to
hookup to the site via FTP. Does anyone know how to do this
successfully?
I already tried and I keep getting an error that says the
folder doesnt exist or it says there could be a permission problem.
Its very frustrating. Startlogic told me its an "adobe problem", so
if anyone knows how to setup dreamweaver via FTP to thier site,
please share!!!
Thank you very much.

Access FTP of course, should have mentioned it anyway
Jo
"josie1one" <[email protected]> wrote in message
news:fiorr8$2h9$[email protected]..
>I have an account with them - and as Alan suggests, they
use public_html.
>In my site definition remote server info I have:
>
> FTP host: st52.startlogic.com
> Host directory: /public_html/ << note essential
slashes
> Login info: - whatever they gave you
> Password: whatever - it might not be exactly what you
chose - they knocked
> off the last character on mine so it's worth checking
the correspondence
>
>
> --
> Jo
>
>
> "texjgc" <[email protected]> wrote in
message
> news:finek5$e9s$[email protected]..
>> Hello does anyone use startlogic as their host?
>>
>> I just signed on with them and I cant get
dreamweaver to hookup to the
>> site
>> via FTP. Does anyone know how to do this
successfully?
>>
>> I already tried and I keep getting an error that
says the folder doesnt
>> exist
>> or it says there could be a permission problem. Its
very frustrating.
>> Startlogic told me its an "adobe problem", so if
anyone knows how to
>> setup
>> dreamweaver via FTP to thier site, please share!!!
>>
>>
>> Thank you very much.
>>
>
>

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do. You would connect and use it the same as a G-Drive.
Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time. The conflicts usually appear as either dropped frames or a complete freeze. This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders. (The problem is the camcorder's FW implementation, not the hard drive.) The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

Anyone use Cloudshare for Sharepoint development?

We need to develop some sharepoint solutions for both existing and future customers. Version varys, and we only have a MS Sharepoint 2013 license through MS Partner currently purchases. We have hence been looking at Cloudshare and there Team License as it fits in well as we have 3 developers that need the access to create.
Does anyone use or have used, or even use an alternateive that we can look at?
Any comments appreciated.
This topic first appeared in the Spiceworks Community

Not for imaging purposes.
You could have an environment that is ready-to-go with the bits installed, but not configured. You would then have a post-imaging script that would configure the farm. In this process, you would also need to make sure SQL Server was aware of the server's
new name (see http://technet.microsoft.com/en-us/library/ms143799.aspx).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Ipod 4 wiped out? I plugged it in to my work computer (used strictly for charging - home computer is where my files are updated) - but today it erased my ipod! Everything is gone

I plugged it in to my work computer (used strictly for charging - home computer is where my files are updated) - but today it erased my ipod! Everything is gone! It is asking me set-up questions (Language, country) and asking me to plug it in & go to ITUNES - problem is, my itunes icon is not working? It usually loads as soon as I plug the Ipod in but not today? I can take it home & plug it in & hopefully my files will come back but why is it doing this? (I've had it more than a year & it's never done this?)

It sounds like a setting change on the computer and iTunes synced the iPod. Yo can only sync with one iTunes library, if yo switch the iPod gets erased and its contents replaced with what is in the iTunes library of the computer.
Go to iTunes>Preferences>Devices and make sure that the box that says "Prevent iPods.. syncing automatically" is checked.

What sustain pedal - exact make, model, type (momentary) is anyone using successfully on their controller? (I'm using m-audio)

what sustain pedal - exact make, model, type (momentary?) is anyone using successfully on their keyboard
? (I'm using m-audio controller)

I took an old Guitar cable, snipped off one plug, connected strand one to a metal plate and strand two to the metal part of a weighted lever. Plug it into the sustain port of my midikeybs. Press the lever onto the metal plate: sustain on. Let go: sustain off.
Even simpler: take a cable with a (mono) plug at on end and the naked two strands (mantel & core) on the other side. If you connect the two strands: sustain! if you disconnect the strands: sustain off.
What I am trying to say is: a sustain pedal is as simple as a doorbel button: on or off. So all that "the maker" can provide is "built quality", but really, any improvised simple momentary contact switch will do. In other words: there's really NO electronics to it, and if it is sold as a MIDI sustain pedal, it 'll work. But a doorbell button connected to jack cable will also work, so make and model (for a pure sustain-only pedal) are irrelevant.

Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

Does restoring using Acronis True Image Home 2011 affects my Authorized Computer count?

Not that I know of. I have Acronis on all of my PCs, and have had to use a reinstall by the tib file. I believe (someone correct me if I'm wrong) Apple senses ip address, PC hardware configurations etc. to confirm a Authorized Computer Count. I had done a total reinstall of Windows 7, and iTunes still acknowledged that PC as being one of my Authorized PCs. So an Acronis restore should not be no problem. I also think that if a person maxes out on their 5 limit, that Apple allows you to be able to"re-set" it. Again,those who are more proficient here, can also confirm that.

I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

Does anyone have material for plant maintenance

does anyone have material for plant maintenance, both configuration and theoratical concepts will be helpfull

The most easily and freely documentation is at http://help.sap.com
thanks
Bala

Anyone using PDDocExportUserProperties for exporting PDF to XML

Hi,
Anyone using PDDocExportUserProperties for exporting PDF to XML. I am using Adobe PDFL 9.0 to do the same. However, do not find any sample programs or tutorials.
Please anyone have any samples, do provide.
-Abhi

> PDDocExportUserProperties
Where did you find this method? It's not listed in the PDFL API Reference for 8.1 or 9.

Does anyone use Xfinity for their home Wifi?

Similar Messages

Maybe you are looking for