Does APD support delta load?

Hello experts,
does the APD support delta load of data in case the data target is
1. a DSO?
2. an InfoCube?
Many thanks in advance,
Marco

Hello Marco,
As far as APD is concern with data source DSO's, it supports only Direct update DSO..& Direct update DSO not support Delta ,hence have an intermediate standard DSO before the Cube which will capture the Deltas....
The flow should be like,
Direct DSO-->Standard DSO --->Cube
Hope it clears your doubt scenariowise.
Thanks,
Santosh

Similar Messages

Data Mart load does not support Delta load?

For data mart load, we create an InfoPackage for Delta load, under data selection tab, for the InfoObj. 0FISCPER, we pick OLAP variable 0FPER [Current Fiscal Year/Period (SAP Exit)], save this InfoPackage, but when get in again, find under Data Selection tab, on the row 0FISCPER, the From Value column becomes 001/2005 and To Value column becomes 011/2005 and the whole Data Selection tab screen becomes non-editable!
The correct behavior should be that after saving the InfoPackage on this row 0FISCPER, From Value/To Value columns are blank and just the Type column value is 7 and after saving the infopackage and get back in, the Data Selection tab screen is editable.
But if we select Full update mode, then switch back to the Data Selection tab, then the behavior is right.
We wonder if SAP doesn't support Delta load for Data Mart load, why under the Update tab, the Delta load radio button shows up after we conducted an initial load? It doesn't make any sense for SAP!

Dear,
as alredy suggested, you cannot do different selection criteria on your delta, since you automatically have to load on the basis of initial selection...and, if you think about it, this is logic: you cannot initialize a flow for certain conditions and then decide to upload in delta other (different) records...
Hope now is clearer...
Bye,
Roberto
clearly, if you perform a full (like a 'repair' full, from a functional point of view), this problem doesn't exist (data is taken from active table and not from change log one!)

Does ODI support parallel loading

Does ODI support parallel loading? For example, I have a source table and a target table for a mapping. In ODI can I specify a number of threads so the mapping can be executed in parallel module? (besides use hint in SQL)

Hi
You can't execute 2 interfaces in parallel, but you can create a package, and call it asynchroneously from an other one.

Does xml support delta?

does Xml support delta?

What is it, an interview question? If so, it is a pretty bad one, in my view
XML is used to push records to delta queue, however what goes in XML is entirely upto you.
You can make an analogy between XML and flatfile; if you want you can put 'delta' data in a file and say it supports delta.

Does 0SEM_BCS_10 supports Delta?

Hi Guys,
Does dataSource 0SEM_BCS_10 supports delta? I found and implemented the note 1008953, however, the delta is still not enabled. Is there a work around or a step I am missing?
Thanks
Paul
Note 1008953 - Delta for 0SEM_BCS_10 is not supported
Note Language: English Version: 2 Validity: Valid from 12-12-2006
Summary
Symptom
The DataSource 0SEM_BCS_10 is not capable of producing delta figures.
More Terms
0SEM_BCS_10
Cause and Prerequisites
Read Note 852971 for further information.
Solution
Implement the relevant Support Package.

Hi Eugene,
Thanks for the input. I got the sense that 0SEM_BCS_10 doesn't support delta, but I just want to make sure since the note 1008953 kind of implies the issue can be fixed by implement the relevant support package.
I looked carefully at note 852971, and it does states that the new GL (0FI_GL_10) contain partner profit center and company ID for trading partner, and this is validated with extractor checker.
This pretty much solves our issue.
Thank you very much!
Paul

OWB 9.0.4 :SQL*Loader: Operator POSTMAPPING does not support

Hi,
While trying to poulate Analytical Workspace using WB_LOAD_OLAP_CUBE, I got the following validation error
The analysis of the mapping is not successful under all supported languages and operating modes. Detail is as follows:
SQL*Loader: Operator POSTMAPPING does not support SQL*Loader generation.
ABAP: Operator AWPARAMS does not support ABAP generation.
I dont know what that means. Your help will be appreciated. Do I need apply some post 9.2.0.3 patch?. If yes, please let me know the patch number if available.
FYI: I am using Oracle9i with 9.2.0.3 patch
Thanks
Panneer

Panneer,
Does the regular process load from a flat file into a table? This would be implemented as SQL loader mapping... in which case a PL/SQL call cannot be implemented.
What you could do:
- Use an external table to read from the flat file.
- Use the transformation in a process flow. I.e. you first execute the SQL loader mapping and then execute the transformation.
Mark.

How to extract data using DSources which do not support Delta

Hi forum,
Iam using a data source which does not support delta. In such a scenario what should i do For subsequent extractions.Will i have to opt for full load every time, if so then how will the double data records be treated. Pls help me out of this situation. In RSA6 if i click on the data source there i can find a check box for enabling delta , but again that is greyed out. If i want to change that what steps should i follow.
All the helpfull answers and solutions would be thanked by assigning full points.
Regards
Pallavi

Can you give me the data source name please.
If it is a standard Business Content Datasource and it does not support delta(or delta is not enabled) then you dont have any choice to modify the standard Datasources. In such cases you can create a Generic DS same as Standard DS and enable delta.
Hope this helps.
Praveen

0co_pc_01 does not supoort delta?

We use BI 7.0 SP 9.
When I extract data trough 0co_pc_01, info package shows only full update mode.
0co_pc_01 does not support delta?

You can check the properties of a datasource in table ROOSOURCE - input required is the datasource and the version - for this datasource the Delta field is blank in this table. This means that this datasource does not support delta.
regards,
Pinaki

Have loaded lion and now cant access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please

Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?

MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
Free alternatives to open Word and Excel files:
NeoOffice http://www.neooffice.org/neojava/en/index.php
OpenOffice http://www.openoffice.org/
Or get the 2011 MS-Office

Does SAP support incremental/delta backups? if so which note describes it

I'm just about to test incremental/delta backups on udb 9.5 fp1. Now to my question:
Does SAP support incrmental/delta backups?
Is there a note, I couldnt get a hit on OSS
Are there any gotcha's? such as do I need to move read only tables to a new talbespace?
Any info on this is greatly appreciated.
Anke

Hi Anke,
You can specify whether you want to perform a full, incremental or incremental delta backup and the frequency via DB13 or the planning calender in DBACOCKPIT.
SAP Note 1269697 DB6: Backup Performance
should be of use to you and please also see our administration guide available at our main page
https://www.sdn.sap.com/irj/sdn/db6 under Administration. Specifically check the guide
"Data Recovery and High Availability Guide and Reference" mentioned in Chapter 8.3.5 Advanced Backup Techniques
There is not a specific SAP note relating to incremental/delta backups but they can be scheduled via DB13 and so, they are supported.
Regards,
Paul

Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?

Recently got new iMac with Lion.....when I try to load my LogicPro software, I get 'OS does not support power PC'. Is there a download to fix or must I spend another 500 on software?

What version of Logic do you have?
And if you end up upgrading, it's only $199 now.

Does SLS support load balancing services?

Does SLS allow for load balancing of services? Such as iChat, Address Book, Calendar, Mail, Web, etc?
Right now I have four Mac Mini servers
Mac Mini 1 - Primary DNS, Open Directory Primary
Mac Mini 2 - Primary DNS, Open Directory Replicate
Mac Mini 3 - VPN, Mobile Access, File Sharing, Software Update Services, Address Book, iCal, and iChat.
Mac Mini 4 - Web / Mail
I want to get two more mac mini's to load balance #3 and #4. Meaning, if the server goes down or gets heavy load, it will start utilizing the other mac mini.
How can I set this up??

As for load balancing iAS has a component called Web-Cache which can be used for this.
For installation of iAS as per the OS you will find information at the folowing link:
http://otn.oracle.com/docs/products/ias/content.html
-- Mathew

TS3230 I can't get WebGL to run. Its says Safari does not support it. I can't figure out how to down load it?

I am trying to access www.zygotebody.com I keep gettin a message box stating that Safari does not support WebGL. Anyone know how to make it work? My teacher was using it on his mac book. I should be able to get it to work on my desk top?

Download and install another web browser.
Mozilla Firefox Web Browser — Free Download — mozilla.org
Having a backup browser installed is a good thing to do regardless. If you have problems with Safari, you may need the backup browser for downloading files in a pinch.

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

Does APD support delta load?

Similar Messages

Maybe you are looking for