Does APO support the simplified CrossCompany STO scenario from ECC ?

Hello experts,
I'm seeking for some short infos around using / support of the "single document CrossCompany StockTransfer Order" process from ECC and whether this can be used within APO. If someone has some experience with this I would be happy to hear any feedback on this.
The starting point is that we use today an APO planning process for cross company replenishment via the famous 2-documents flow (IC PurchOrder --> IC SalesOrder) and we wanted to check if APO-SNP can support the simplified STO scenario. The "beauty" of course is that you only have a single document to deal with in an intercompany process.
Can SNP create STO PReqs (is this only depenend on the source-of-supply definition in the vendor master in ECC) ?
Can SNP Deployment process such SNP STO PReqs at a hub location ("fair share" at supplying plant)?
Can TLB by used at a Hub to turn such "deployed" STO PReqs into STO PurchOrders in ECC ?
Is the fcst consumption of such STOs working in the supplying plant side ?
Are there any serious / known limitations working with STO in APO (using Interchangeability, using GATP in the supplying plant side to perform rescheduling by BOP on these STOs etc.)
Thanks for any hints or experience sharing !
Regards
Thomas

Hi Frank,
thanks for the detailed info - this helps to find a way thru the larger documentation. In regards to applying / testing the RDS we will check getting an SCM sandbox "on-hand".
Beside this I started searching OSS on my initial question - note 1284461 - Release Restrictions for SAP SCM 7.0 seems have some items to around using  "STO" in APO SNP & GATP (see below).
Another note explicitely defines how to get the right "SourceOfSupply" definition into APO for the STO sceanrio: 1623475
So, what is basically left open for me is:
* is TLB correctly working using "SNP Deployed STOs" ?
* at the supplying plant of the STO (typically a central DC) - is GATP able to catch at least demand of such STOs for ATP qty consideration
Regards
Thomas
Stock Transport Order and product interchangeability
The functionality of product interchangeability in Stock Transport Orders (STO)s
will not support
- purchasing requisitions and scheduling agreements
- old purchase transaction e.g. ME21
.. the handling in case of inconsistencies between confirmed quantity in STO/delivery
and real quantity in warehouse at time of goods issue can only be resolved as
follows:
- Either deletion and recreation of STO and delivery
or
- post goods issue with #real# quantity (reduce delivered quantity), post goods receipt and
set delivery complete indicator, correct situation in warehouse, create new STO
item.
Backorder processing for Stock Transfer Orders - Rescheduling
The rescheduling for Stock Transfer Orders is done in LC during the update.
Rescheduling is supported during Backorder processing (BOP) but the results are
only consistent with LC scheduling if Configurable Process Scheduling (CPS) is
used.

Similar Messages

  • PDF report in 6i does not support the Simplified Chinese Character?

    Hi :
    I generate the PDF format report by report 6i (patch 5) , but the Simplified Chinese Character does not display in PDF files correctly(Acrobat reader 5) , Why ??
    can somebody help me , thanks in advance !!!

    I believe this is not available in PDF until 9i - ref <Bug:1738911>
    Regards
    Grant Ronald

  • Aperture does not support the more expensive Lumix cameras from Panasonic!

    Aperture does not support RAW in the GF!, G1 or GH! cameras - cameras hailed as breakthroughs. Does anyone know why or when it may do so?

    I believe that you posted in the AirPort forum by mistake. It appears that you intended to post this in the Aperture forum.

  • BPE_adapter The process does not support the given synchronous interface

    We are using PI 7.0 Sp 14 .
    Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
    Our scenario is Extern system send SOAP call to PI  - BPM_SYNC_ASYnc_process --> BPM Proxy_send 
    this BPM proxy_send   to ECC R/eceiver at R/3
    We are getting the following error after migraiton. Please help
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
    -->
    Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
    <SAP:Retry>N</SAP:Retry>
    </SAP:Error>

    Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
    Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
    Thanks

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

  • The Organizer does not support the color space in the file

    I just purchased and installed PSE 8 as an upgrade to PSE 6.  My catalog correctly shows all of my existing images.  However, when I try to import photos into the Organizer, I get a message that nothing was imported.  The reason given is that "The Organizer does not support the color space in the file."  This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS.  Any suggestions?
    Here is my system information:
    Elements Organizer 8.0.0.0
    Core Version: 8.0 (20090905.r.605812)
    Language Version: 8.0 (20090905.r.605812)
    Current Catalog:
    Catalog Name: My Catalog
    Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
    Catalog Size: 83.9MB
    Catalog Cache Size: 459.8MB
    System:
    Operating System Name: XP
    Operating System Version: 5.1 Service Pack 3
    System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
    Built-in Memory: 2GB
    Free Memory: 829MB
    Important Drivers / Plug-ins / Libraries:
    Microsoft DirectX Version: 9.0
    Apple QuickTime Version: 7.65
    Adobe Reader Version: 9.2
    Adobe Acrobat Version: Not installed
    CD and DVD drives:
    J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Installed graphics card does not support the opengl features recommended

    I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
    I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
    I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
    and http://www.apple.com/finalcutstudio/download/):
    * A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    * 1GB of RAM
    * An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    * A display with 1024-by-768 resolution or higher
    * Mac OS X v10.4.11 or later
    * QuickTime 7.3 or later
    * DVD drive for installation
    I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
    Thanks in advance for any helpful advice you may have.

    The minimum would probably be an nVidia Fx5200 or an ATI 9600...
    Patrick

  • Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

    Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
    Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
    I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-

    Hi
    This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
    Connecting the Wedge Mobile Keyboard to a tablet PC
    By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
    In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
    Pair your keyboard through SSP without a passkey
    Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
    On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
    Select Add a device.
    When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
    Note
    If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only.

  • TS3230 i get a pop-up window saying the current version of Safari does not support the community toolbar.  How do I get rid of this?

    i get a pop-up window saying the current version of Safari does not support the community toolbar.  How do I get rid of this?

    You need to uninstall the Community / Conduit toolbar add-on.
    Locate the files in bold print and move them to the Trash. The first five are in your root   /Library
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/ScriptingAddtions (anything CTLoader realted)
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    The next one is in your Home folder.
    ~/Library/Application Support/Conduit
    When you're done, try Safari.

  • Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

    As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC. 
    Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April.  One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
    about the pending change and how it would be handled.  Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
    under IE) and on Fri 4/17 shut it down for the weekend.  When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!  
    I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight.  I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
    file) and got part-way through the install when this error msg popped up:  "Unable to Install Silverlight.  Your operating system does not support the 64-bit version of Silverlight".  WHAT?!   Clicking on the "more info"
    link led to this msg:  "Message ID: 1518.  Your operating system does not support the 64-bit version of Silverlight.  Click here for the latest version of Silverlight."  That link simply led back to the download page which resulted
    in receiving another copy of the same executable file.
    According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type:  64-bit Operating System".  I've been using this same Vista PC since Sep 2008 and running Silverlight for
    around the past 5 yrs.
    ? -- Why doe the Silverlight installer code flag my OS as not supported?   
    ? -- Is there a way to get an older version of Silverlight that will run under Vista?  
    Thanks in advance for any helpful comments.

    Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.  
    Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed.  A phone call to their tech support (predictably)
    led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue).  The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
    Here's something I forgot to mention in my original post:  In several of the threads on this subject (some dating back to 2008!), people have
    suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
    system does not support the 64-bit version of Silverlight"; it doesn't say anything about
    what browser you're using.  

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

    Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
    Any suggestions?

    Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
    As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
    Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
    https://wiki.mozilla.org/Firefox/win64

  • If I install Windows 7 on iMac (what we have done many times and it works very good) does windows support the fusion drive?

    if I install Windows 7 on iMac (what we have done many times and it works very good) does windows support the fusion drive?

    Welcome to the Apple Support Communities
    Fusion Drive is created by software on OS X. On a computer with Fusion Drive, Windows is installed on the HDD, but when you install the Boot Camp drivers, you will be able to read Macintosh HD, so it looks like it supports Fusion Drive but only for read

Maybe you are looking for