Does AppleTV/HDMI support interlace ?

I´m on the way converting my home recorded videos to AppleTV format using handbrake and i wonder if i should use the decomb/deinterlace function or not?
My videos are PAL 576res interlaced. And i guess if AppleTV shows it in 720res on the TV won´t interlace?
At least i don´t know how this should be able to work.

I'd be interested in knowing an answer to this too. My guess is yes, because it'll just output whatever you give it, and then it's up to your TV to detect the interlaced image. It works with my Samsung Smart TV playing a PAL interlaced video converted using VisualHub to MP4, but it would ease my mind to know if the Apple TV does the same before I fork out the cash (even though it is cheap).

Similar Messages

Cisco SX10 - Does presentation HDMI support stereo audio

Hi All,
I have an SX 10 installed, when sending audio in a presentation it only plays one channel of the audio (mono) not both, is this normal?

Hi,
i have also noticed that part, but surely your left and right channels should then be combined into one channel.
What is happening is that only one part (Right channel) of the audio clip is played during a presentation.

Does Nokia X7 supports HDMI output as well as USB ...

Does Nokia X7 has the ability to support HDMI Output?
Does Nokia X7 supports USB Mass Storage Devices when plugged in as the Nokia N8 does?

It does not support HDMI probably a cost cutting measure,it supports microUSB v2.0, USB On-the-go support.
And it supports USB mass storage
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Does hisense tv supporte the apple tv 3rd generation?

does hisense tv supporte the apple tv 3rd generation?

any tv which is fullHD or hdReady (but then atv3 will not work in fullhd of cause)
and follow the hdmi and hdcp std's are supported
there are not made for appletv tv's out there (at least I hope not as that would be as much a scam as made for xbox or playstation)

HT2646 Does the HDMI cable get connected to the TV or HD receiver if you have a Bose surround system

In setting up apple tv does the HDMI cable get connected to the HD reliever instead of in back of the tv when u have a Bose system?

Your best bet is to connect the AppleTV's HDMI to the Bose and the Bose HDMI to the TV. You could connect the AppleTV's HDMI to the TV and the AppleTV's optical to the Bose but optical (S/PDIF, specifically) does not have as much bandwidth as HDMI so you'd potentially have lower quality sound (from what I've read...I'm not an expert on audio).

What frame rates does FCP 7 support?

The manual does not mention 1080p60 once while it enumerates virtually every other resolution, frame rate and interlaced/progressive that typical camcorders can record. I thought that meant it did not support 1080p60, but it is clear from several posts here that it does support it. Does FCP 7 support 1080p60 with some restrictions? Does FCP 7 support any frame rate--say 5,000 frames a second that a high speed camera might generate? Thanks, Dennis

It supports 1080p60...that is 1080p at 60fps (because 1080i60 means 29.97 fps)...but you have to modify things. That is a non-standard format. BluRay discs don't play that, only one high end tape format supports that format. Because of this lack of real support for this format, barring very high end, it isn't a general setting in FCP.
yes, there are cameras that shoot that format. And I suppose they are meant to have you play back from the camera, or SD card player (some BluRay players do this).
Does FCP 7 support any frame rate--say 5,000 frames a second that a high speed camera might generate?
FCP supports editing of professional broadcast formats. Cameras that shoot 5000fps, generally are meant to then output that to one of the broadcast formats...23.98, 29.97. Thus getting that slow motion. You don't edit 5000fps. NO editing app edits 5000fps. It gets converted to the proper frame rate, then edited. The Phantom camera files are converted for editing.
Shane

Does Adobe Prelude support USB3 video import?

Does Adobe Prelude support USB3 video import?

Hello Michael,
Thank you for the response. I have used Adobe OnLocation before with a firewire camera and a laptop. My Panasonic HMC150 has HDMI output instead of Firewire. What I was hoping to do was to connect my camera via HDMI to the BlackMagic Intensity Shuttle and then to my laptop running Prelude via USB 3.0. Do you know if any Adobe Product supports USB 3.0 camera input streaming?
Regards,
Mark
Date: Mon, 10 Sep 2012 11:53:29 -0600
From: [email protected]
To: [email protected]
Subject: Does Adobe Prelude support USB3 video import?
Re: Does Adobe Prelude support USB3 video import? created by michaelgoshey in Adobe Prelude - View the full discussion
Hi Mark,
Prelude can ingest assets from mountable drives/volumes seen by the OS. If the device you connect via USB3 is mounted by the OS I would expect no issues with Prelude ingesting from it.
However, if you are referring to the possibility of Prelude capturing a live stream from and camera via USB3 then that is not something Prelude supports.
Happy to answer other questions you may have on this.
Regards,
Michael
Product Owner, Adobe Prelude
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4687454#4687454
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4687454#4687454. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Prelude by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT200047 does apple tv support arabic subtitles

does apple tv support arabic subtitles

if the material in itunes state arabic subtitles then yes
if the material is not from itunes then the subtitles are burned in as a part of the video and the appletv does not even know it's there

What type of HDD does MS-6382 support?

Hi,
My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of 120 GB"
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
I would be grateful for any help anyone can give!
Here is some info on my current HDD:
HD Tune: ST380020A Information
Firmware version : 3.39
Serial number : 5GC0KMYD
Capacity : 73.1 GB (~78.5 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-6
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : no
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Managment : yes
Power Managment : yes
Advanced Power Managment : yes
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : C:\
Label : MR01-G4
Capacity : 74822 MB
Usage : 17.54%
Type : FAT32
Bootable : Yes
Jorolat

Quote from: Wonkanoby on 19-June-05, 21:26:02
ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
the drive will run at about half that speed once the cache is cleared
dont worry about it
Er, I got another question
I'm now looking at this hitachi model:
http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
but I thought I'ld ask before I order it or in case I change my mind (again).
Thankyou for your help
Jorolat

Does lion server support a single email address across multiple devices??

I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
How well will email and calendar entries sync across devices?

I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
I would ditch the exchange server move to Mac OS X Server, and never look back.
God Luck!
PS. All of your devices will be in sync all the time.
Shore answer:
Does lion server support a single email address across multiple devices??
Yes.

Does Crystal 2011 supports SAP R/3 4.6?

Friends,
I would like to know Does Crystal 2011 supports SAP R/3 4.6? Please help.
Thanks,
Tilak

Hi,
yes, it does. Here is a Screenshot from the CR2011 SPS6 Data Access File
The (4) indicates:
(4) SAP servers required to have at least the above patch levels. The following correction notes should be applied to your SAP BW / SAP NetWeaver BI system: 1125433, 1161911, 1162349, 1162416, 1170323, 1230303 and 1007048. OSS Correction Note 1007048 requires a manual configuration step.
Regards
-Seb.

Camera RAW does NOT yet support raw files for the new Canon Sureshot S95

Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asap

Hello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

Hi there,
If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
Lion is fantastic, albeit maybe rushed.
Any other queries, just ask,
Nathan

Does Apple TV support wireless connection to the new MacBook Pro retina in an extended display mode?

Does Apple TV support wireless connection to the MacBook Pro retina display in an extended display mode? What is the output resolution and is sound also transmitted across?

SB1983, by extended display do you mean mirror? All MBP since early 2011 support it if they are running OS X 10.8 Mountain Lion. The resolution will depend on your Apple TV (2 Gen is 720 and 3rd Gen 1080) and wifi, it will lose some quality but I find it minimal. It does also mirror the sound.
Jules

Does AVL table supports popin in WebDynpro ABAP

Hi,
Just a short question, does AVL table supports popin in WebDynpro ABAP?
I know that popin in supported in normal table in WD ABAP. Is this feature also available for ALV table?
Thanks
Yingzhi

Hi Yingzhi Liu,
Did you get any answers to this question?
I'm also trying the same where we need to show additional details for an ALV table row. Is it possible to have a table popin in ALV? We are on 2004s release and implementing Web Dynpro for ABAP.

Does AppleTV/HDMI support interlace ?

Similar Messages

Maybe you are looking for