Does ASA ezVPN support reactive primary vpn server feature
hi,
i am going to configure asa5505 as the azvpn client . and configre primay and secondary vpn server in the list.
i find some feature that is support by ios ROUTER ezvpn, not sure it will be support on ASA ezVPN???
Question? will the ezvpn fall back to the primary vpn server , if primary back on line, on ASA ?
Reactivate Primary Peer
The Reactivate Primary Peer feature allows a default primary peer to be defined. The default primary peer (a server) is one that is considered better than other peers for reasons such as lower cost, shorter distance, or more bandwidth. With this feature configured, if Easy VPN fails over during Phase 1 SA negotiations from the primary peer to the next peer in its backup list, and if the primary peer is again available, the connections with the backup peer are torn down and the connection is again made with the primary peer.
No, the Primary peer won't be tried again until the phase 1 tunnel is torn down and reactivated. Re-keys do not count. Hope this helps.
Similar Messages
-
ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?
Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.
I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml -
Does GT60-ONC support Hyper-V (Windows Server 2012)??
Does GT60-ONC support Hyper-V (Windows Server 2012)??
I own GT60-ONC bought in Thailand.
I remove windows 8 and install Windows Server 2012.
I want to install Hyper-V feature.
But I cannot see any option to enable virtualization from BIOS.
my current BIOS info.. is
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Tue 04/29/2014 at 11:50:02.71
Mainboard: MS-16F3
PCB Version: REV:1.0
BIOS Version: E16F3IMS.10C
BIOS Date: 4/26/2012
EC-FW Version:
please help .........
///You are using Hyper-V server and not Hyper-V on Windows Sever.
Hyper-V server is free, but it only includes the Hypervisor and no GUI (Only for managing Hyper-V)
what's your physical machine OS ?
If it's Windows 8 or 8.1 then you can enable the Hyper-V management tools (Programs and features, Turn On/off Windows Features, Hyper-V, Hyper-V management tools). Then open the Hyper-V console and connect to your Hyper-V server.
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com -
VPN Server Feature for WRT1900AC
Hi there,
is there a timeline for when the VPN Server feature gets implemented into the WRT1900AC router? That particular feature decides whether I'm buying it or not.
Cheers,
DaveThanks guys, but you are missing the point.
See here: www.linksys.com/en-us/press/releases/2014-04-10_Linksys_Starts_Shipping_the_WRT1900AC_the_Successor_...
"Linksys is also planning to add Wi-Fi Scheduling and an OpenVPN-based VPN server to the WRT in a future firmware update to enable users to establish a secure remote connection to the router from anywhere in the world."
I wanted to know from Linksys or some insiders here in the forum, whether there is already a rough timeline on this feature. F.i. in which quarter the users can expect it to be implemented.
Cheers,
Dave -
Does ASA 5520 support PKCS#11 ?
Hey.
does ASA 5520 VPN Plus (Cisco Adaptive Security Appliance Software Version 8.4(3) Device Manager Version 6.4(7))
support PKCS#11 ?
Thank you for answering;)You can purchase an AIP-SSM module for an ASA 5510 or 5520 to enable IDS/IPS functionality on the platform.
http://www.cisco.com/en/US/customer/prod/collateral/vpndevc/ps6032/ps6094/ps6120/ps6825/product_data_sheet0900aecd80404916_ps6120_Products_Data_Sheet.html -
Does Amazon(AWS) support hosting OS X server ?
Hi All ,
Our company is trying to support some mac clients internally and plan to set up Apple magic triangle and doesn't like to purchase additional hardware so we plan to use AWS and i have looked up for a while to find out whether Amazon hosts OS X servers but i didn't find any. Can anybody please point me in the right direction as to how .?Welcome to Apple Support Communities
Of course. Moreover, all Macs that can run OS X Mavericks are able to run OS X Mavericks Server.
Open the Mac App Store and purchase OS X Server. When the download finishes, the OS X Server setup will appear, so follow its steps.
OS X Server is designed to work in small networks, so in this case, near any Mac works -
Does asa 5505 support h.323 v6?
we've been told that our firewall must support version 6 to connect to a newer unit. more precisely, we've been told that that we're currently doing intelligent packet inspecting which is part of the problem
This feature allows you to change the default configuration values used for H.323 application inspection.
H.323 inspection supports RAS, H.225, and H.245, and its functionality translates all embedded IP addresses and ports. It performs state tracking and filtering and can do a cascade of inspect function activation. H.323 inspection supports phone number filtering, dynamic T.120 control, H.245 tunneling control, protocol state tracking, H.323 call duration enforcement, and audio and video control. -
Does the iPhone support a "Random Play All" feature?
After reading the iPhone manual on-line, I did not see direct support for a "Random Play All" option.
Please tell me that this was an omission in the manual and it is directly supported by the iPhone, because this is a deal breaker for our family if it is not directly suported.It might help if I had any idea what that feature was.
Do you mean a shuffle feature-where it randomly picks music tracks and plays them?
If so-the 3g iPhone has it. -
Does Nokia c5 supports text copy paste feature
Friends i had recently bought a nokia c5 mobile phone and i wants to know that does this phone supports TEXT COPY AND PASTE FEATURE? Its urgent, plz reply. Thanks
Once U have Selected the text keep pressing the # Key and pree the Left Soft Key to Copy The Text...
To past the text in any text editor press and hold the # key and press Right Soft Key...
# key plus Navigation keys also helps in removing the long texts... Just select the text and press C... Its faster than Using Delete Button to remove text.. -
Does ASA Support Android Hybird RSA Authentication ?
Dear all
Does ASA Support Android Hybird RSA Authentication ?
I should be such as to set the ASA firewall, let him support Android VPN Hybrid mode under my settings
tunnel-group IPsec_Hybird_Tunnel general-attributes
default-group-policy Android_Hybird
authorization-required
tunnel-group Android_Hybird_Tunnel ipsec-attributes
ikev1 pre-shared-key **********
chain
ikev1 trust-point CA
ikev1 user-authentication hybrid
tunnel-group Android_Hybird_Tunnel ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 10
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
when i debug find this message
%ASA-7-713906: IP = 1.1.1.1, All SA proposals found unacceptableI've managed to configure IPSEC hybrid(Mutual group Authentication) with the Cisco VPN client, which uses a pre-shared key and CA certificate as well as Xauth. When using "IPSec Hyrbid RSA" on an an Android device, my attempts to configure it on the ASA have failed.
Log message:
3
Jul 25 2013
20:39:54
713048
IP = 192.168.7.76, Error processing payload: Payload ID: 1 -
Cisco 871W eZVPN is unable to connect Cisco PIX vpn server
crypto ipsec client ezvpn TEST
connect auto
group Cisco key cisco123
mode client
peer 172.1.1.1
xauth userid mode interfactive
interface FastEthernet4
ip address 10.1.1.1 255.255.255.0
ip access-group 101 in
ip nat outside
crypto ipsec client ezvpn TEST
Internet Vlan1
ip address 192.168.1.1 255.255.255.0
ip access-group 100 out
ip nat inside
crypto ipsec client ezvpn TEST inside
ip route 0.0.0.0. 0.0.0.0 192.168.1.254
ip nat inside source route-map EzVPN1 interface FastEthernet4 overload
access-list 100 permit ip any any
access-list 101 permit ip any any
access-list 103 permit ip 192.168.1.0 0.0.0.255 any
route-map EzVPN1 permit 1
match ip address 103
These are the following commands I applied in my Router, It is able to connect but unable to access any other servers. The same user name & password I tried with the VPN dialer it works on my Laptop. Anything I am missing on the router configuration. The VPN server is Cisco PIX 515E.
Cisco IOS on 871W is 12.3(8)Y121) Isn't your default route supposed to be pointing towards the external interface?
ip route 0.0.0.0. 0.0.0.0 192.168.1.254 ?
2) Can you change the 'mode client' to 'mode network-extension'. Also the PIX will need 'nem enable'.
Have a look at the following (I'm assuming you already have as your config seems to be similar):
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080809222.shtml
For old 6.x code on PIX, have a look at:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080241a0d.shtml
Regards
Farrukh -
Does Firefox OS support the use of VPN's?
Simple question, does Firefox OS support the use of VPN's? If not is it a feature that will be added? And if so, when?
Thank you for your interest and for purchasing a device! The bug reported has went through some employees. I'm sure that we'll get something done shortly.
-
How does the ADF support romote call method between two managed server ?
How does the ADF support romote call method between two managed server ?
You would usually use this as a WebService through the WSDL that is exposed.
JDeveloper can help you create a Java Proxy to call the Web service if you point it to the WSDL file that was generated for your AM.
Some other samples here:
http://www.connotea.org/user/jdeveloper/tag/Service%20Interface -
Ezvpn client on router to windows vpn server
Hi
is it possible to connect cisco router using ezvpn to windows 2008r2 server?
i spend a lot of time and got no success.
i'm trying to connect cisco 881g using ezvpn to windows vpn server (RRAS) usign pre-shared key.
or i should try to connect in any differ way ? (for e.g. using vpdn on router)
pls refer me to some docs if it possible... coz i begin to doubt
thanks in advancelan-to-lan is also good idea . but cisco router in behind the NAT. so i'm not sure that lan-to-lan is possible. (exactly i do not know . is it possible?)
exactly i need vpn from cisco to windows 2008 . i need to pass all traffic through win2008 gateway. is it possible?
i tryed to deploy conf like that:
pseudowire-class pw-class-1 encapsulation l2tpv2 protocol l2tpv2 ip local interface FastEthernet4
interface Virtual-PPP1 ip address negotiated no ip redirects no ip unreachables no ip proxy-arp ip mtu 1492 ip nat outside no ip virtual-reassembly no cdp enable ppp authentication chap callin ppp chap hostname ******* ppp chap password 0 ****** ppp ipcp route default pseudowire 1 encapsulation l2tpv2 pw-class pw-class-1 !
bt no success.. on win 2008 side i can see (with MS NET MON) that some packets come from cisco. but vpn connection was not established. -
Does Oracle database supports Windows server 2012?
Does Oracle database supports Windows server 2012? If not, when it will be supported?
Hi;
Oracle not certified wiht win8 or win2012. Please check below note:
Oracle - Compatibility Matrices and Release Information [ID 139580.1]
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios
Maybe you are looking for
-
I can send you a screen shot if that would be helpful. I have noticed that the emails sent out of S1 always default to the end of the message so we need to scroll up to edit what we've written. Most of the time I need to edit the text near the top of
-
Burn 7 times (Playlist or individual MP4 file)
I buy the new Daughtry album. I create a new Playlist and call it Daughtry S/T and drag the songs into it. Now I can burn that playlist 7 times. If I cahnge the name of the Playlist to Daughtrt 1st CD does this give me a new 7 times or are the indivi
-
I am getting "weblogic.security.CipherException: Incorrect encrypted block" error for SSLServerCertificateChainFile. I tried to follow the instruction in http://www.bea.com/support/askbea/wls/S-07188.shtml but I had a problem in the very last step. 1
-
After updates the "preview" window is "hazy" CS 4.2.1
I worked with some .DV files the other day without any issues. Today I applied all updates to Adobe and now the same project that worked just fine the other day is acting weird. The preview video has what looks like a hazy on it and it when preview
-
I just got CC on my workstation computer, and whenever I run a program it will open but close shortly after. I am not having this issue with Lightroom or Acrobat. One thing I noticed, however, is that Lightroom asked me to register the product/serial