Does ASA rdp Plugin supports windows server 2012?

HI,
I am using rdp plugin for ssl vpn, it is working fine for windows server 2003 but same plugin is not working for server 2012.
Can you please tell me does it supports or not. Is there any changes we need to do at server side?

Hi Guna,
There is an enhancement request opened for supporting RDP plugins on Windows server 2012.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuh27112
So as of now your only options is to use Anyconnect client or Smart tunnel.
HTH

Similar Messages

Biztalk Server 2013 does not support Windows Server 2012 R2

is there any document or statement from MS that States "Biztalk Server 2013 does not support Windows Server 2012 R2"

Hi Mohit,
I haven't come across any document, but there is a blog from Microsoft about it.
http://blogs.msdn.com/b/biztalknotes/archive/2013/10/29/biztalk-2013-compatibility-with-latest-platforms-of-microsoft.aspx
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Does Oracle database supports Windows server 2012?

Does Oracle database supports Windows server 2012? If not, when it will be supported?

Hi;
Oracle not certified wiht win8 or win2012. Please check below note:
Oracle - Compatibility Matrices and Release Information [ID 139580.1]
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

Disabling RDP Compression on Windows Server 2012 R2

Hi
On Windows 2008 R2, we could disable RDP compression via GPO by configuring "Do not use an RDP compression algorithm" in the following GPO
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Set compression algorithm for RDP data
It seems like with the Windows Server 2012 R2 GPO's, this setting is no longer available? How do we disable RDP compression so that we can use it with Riverbed products?
Thanks

Hi,
How is the issue going now? Is there any update?
Thanks.
Jeremy Wu
TechNet Community Support

How to RDP access my Windows server 2012 system with Windows 7 system

In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
2. Disabled the firewall in Windows server 2012.
Can someone advice me on the below.
1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

Hi,
Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
Create a incoming UDP rule on firewall to allow port 3389 and give a try.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

System sound delay RDP session with Windows server 2012 R2 standard

I have the following problem during a RDP session with a Microsoft Terminal Server 2012 R2 standard:
when i produce a system sound, the delay could be up to 15 seconds before I hear the cound on the client side.
making immediately a second system sound, the delay is minimal,
When i wait about 10 minutes, the delay could be again 5-15 seconds.
This problem occurs both with Windows 7 and Motorola Scanners
I also noticed that after making a sound on the first device, there is also no delay when making immediately a sound on a second RPD session.
I tried different settings for audioqualitymode or audiocapturemode, no luck
henk

Hi Henk,
As the way I see it, it’s a poor performance behavior of RDP.
You may try to update sound driver and fully patch systems to see whether performance can be improved.
“RDP was originally designed to flush the video frame buffer to the client about once every 100 milliseconds. While this is fine for most Windows GDI applications, graphic intensive applications, 3D applications and applications requiring audio
/ video synchronization don’t fare so well. With respect to streaming media in particular, RDP is only meant to cache the bitmap files (compressed) not the audio which is uncompressed over the wire”, quoted from the article below:
Terminal Services and Graphically Intensive Applications
http://blogs.technet.com/b/askperf/archive/2009/04/17/terminal-services-and-graphically-intensive-applications.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Exchange 2007 RTM support with Windows Server 2012 R2 Domain Controller

Hi All,
I have not found any TechNet Article which states about the Windows Server 2012 R2 Active Directory domain controller operating system support with Exchange 2007 RTM, can some one please let me know that does Exchange 2007 RTM supports Windows Server 2012
R2 domain controller operating system, we are in the process of upgrading the domain controllers to 2012 R2 but not the forest and domain functional level to 2012 R2.
thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

There are several likely reasons for this. The most significant is that Exchange 2007 RTM is no longer supported (outside ot extended support, which is not going to include adding support for new operating systems):
http://support2.microsoft.com/lifecycle/default.aspx?LN=en-us&p1=10926
You'll note from the following -
http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx - that only Exchange 2007 SP3 is currently supported in any environment.
HTH ...

How to install RDP CALs pack on Windows Server 2012 R2 (member of NT domain)

OS: Windows Server 2012R2 (64-bit), member of NT (Samba 3) domain.
Task: install RDP CAL pack, to allow connecting above its default 3 sessions limit.
Problem: when setting up RDP licensing/other required service, I came to a problem: RDP access broker service requires AD type of domain to be installed.
The server is part of NT (Samba 3) domain and we have no intention to change domain type only to satisfy an auxiliary service.
Is it possible to enable additional RDP CALs on Windows Server 2012 R2 without mandatory joining an AD? The license control available up to Windows Server 2008 has been removed from Windows Server 2012, I can't bypass installing broker and the rest of related
services.
Thank you for any information.

Hi,
you might find the dedicated TS/RDS forum is better suited to your question:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverTS
Some related information which may be helpful:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cbffb2d4-ff9d-49ee-a9ce-a60db2262422/managing-server-2012-rds-in-a-workgroup?forum=winserverTS
http://support.microsoft.com/kb/2833839/en-au
http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

New Mac Pro (late 2013), Boot Camp, Windows Server 2012

Does new Mac Pro (late 2013) support Windows Server 2012 install by Boot Camp?

No.
Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
Apologies, Templeton Peck, did not see your post.

Is Adobe Media Server 5 Professional Compatible with Windows Server 2012?

Could anyone from Adobe please verify the following link is up-to-date and AMS 5 Pro does not support Windows Server 2012?
http://www.adobe.com/products/adobe-media-server-professional/tech-specs.html
Thanks

Hi Jorma,
Thanks a lot for your reply.
Does Adobe has any timeline for testing on Windows Server 2012 and for officially supporting the platform?
Thanks again.

Can't print a pdf file with adobe reader 10.1.12 on a Windows Server 2012 R2 RDS session

Situation : My users are connected with RDP on a Windows Server 2012 R2 Datacenter Remote Desktop Service and when they log on, their share printers are installed.
When some users open a pdf file, they can't print it. When they try to print a file, nothing happen... No file sent to the printer...
I have seen a difference between the shortcut icon of adobe reader for users who have this problem and others.
No Problem :
Problem :
If someone can help me
Thanks !

Hi Ajlan,
To fix my problem, i uninstalled adobe reader X with "Adobe Reader and Adobe Acrobat Cleaner Tool", rebooted the server, installed Adobe Reader XI and rebooted again.
For some users, this fix the problem but with some others i had to define Adobe Reader by default again.
I tried without use "Adobe Reader and Adobe Acrobat Cleaner Tool" before and adobe reader X wasn't really uninstall.
Thanks,
Regards,
Sullyly

Acrobat 9 pro support windows server 2003 32bit?

in the acrobat 9 pro readme file,I see the system requiement:
Windows Server® 2003 (with Service Pack 2 for 64-bit);
my question is that does acrobat 9 pro support windows server 2003 32 bit?
I have install it at windows server 2003 32bit,
but when i open it, a message box
"Licensing for this product has stopped working"
i have try the solution in kb405970, and can not resolve it.
so manybe really it doesn't support windows server 2003 32 bit?

John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
1. From 32bit -> 64bit
2. From Windows to Linux
3. From Oracle 10gR2 to 11gR2
The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
Cheers, APC

In-place upgrade: Windows Server 2012 to 2012 R2

I have a Windows Server 2012 physical server running Exchange Server 2013. Microsoft has stated that Exchange Server 2013 Service Pack 1 (or CU4 in the new parlance) will finally allow Exchange Server 2013 to support Windows Server 2012 R2.
Although Exchange SP1 has not yet been released, I want to do some advance effort planning. If I apply Exchange SP1, will I be able to run an in-place setup/upgrade to Windows Server 2012 R2? Thanks.

Hi,
Since Windows Server 2012 R2 is not currently listed as a supported OS platform for Exchange 2013, it is
not recommended to update the OS on your Exchange servers to Windows server 2012 R2 at the present. For more detailed information, please refer to the link below:
Exchange
Support For Windows Server 2012 R2
Best regards,
Susie

Unable to Connect to SQL 2000 Instance from Windows Server 2012 environment

We have a windows server (TEST) 2012 environment , where our test SQL Server 2012 instance is hosted.
We have a different (DEV) Server (windows 2000) where a SQL Server 2000 instance is present.
When I RDP to our Windows Server 2012 box, I cannot connect to the SQL 2000 server instance from SQL Management Studio. (whereas I can connect to
the same server from my local machine which has windows 7 and SQL 2012 installed).
This is the error i see -
"A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.) (.Net SqlClient Data Provider)"
When run from SQL Agent Service from TEST (A Job which tries to connect to that SQL 2000 instance to read some data using SSIS) , we get the following
error -
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead
(recv()).]General network error. Check your network documentation.".
The same SSIS package runs successfully from my local machine.
Please, could someone advice how to resolve this situation?

Thanks Olaf.
Its just that we have legacy systems here in our company, who, for some reason haven't upgraded their older infrastructure, whereas they have set up new Windows 2012/SQL 2012 environments for the newer sql instances where they want to transition to !
Not sure what the solution is honestly. It is affecting our timelines now. The infrastructure team needs to take a decision now, as to what to do.
I do have to add, we were able to connect to these "older" servers from our Windows 7 client machines which have SQL 2012 - both from SQL management studio & SSIS (using OLE-DB Provider for SQL Server).

Does ASA rdp Plugin supports windows server 2012?

Similar Messages

Maybe you are looking for