Does ASA Support Android Hybird RSA Authentication ?

Dear all
Does ASA Support Android Hybird RSA Authentication  ?
I should be such as to set the ASA firewall, let him support Android VPN Hybrid mode under my settings
tunnel-group IPsec_Hybird_Tunnel general-attributes
default-group-policy Android_Hybird
authorization-required
tunnel-group Android_Hybird_Tunnel ipsec-attributes
ikev1 pre-shared-key **********
chain
ikev1 trust-point CA
ikev1 user-authentication hybrid
tunnel-group Android_Hybird_Tunnel ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 10
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
when i debug find this message
%ASA-7-713906: IP = 1.1.1.1, All SA proposals found unacceptable

I've managed to configure IPSEC hybrid(Mutual group Authentication) with the Cisco VPN client, which uses a pre-shared key and CA certificate as well as Xauth. When using "IPSec Hyrbid RSA" on an an Android device, my attempts to configure it on the ASA have failed.
Log message:
3
Jul 25 2013
20:39:54
713048
IP = 192.168.7.76, Error processing payload: Payload ID: 1

Similar Messages

  • Server does not support PLAIN or LOGIN authentication

    I try to send mail via XI Mail adapter. My settings are below
    Transport protocol : SMTP
    Message protocol : XIPAYLOAD
    url : smtp://10.44...
    Authentication Method : Plain
    User : ...
    Password...
    From :
    To : ....
    But i give this error   "server does not support PLAIN or LOGIN authentication"..
    I think I use SSL or something else, but I dont know how to do by using Mail adapter..
    Or Why do i get this error ?
    Thanks

    Hello Tuncer,
    In your case, you need to first enable SSL on your PI server, which requires some effort. Here are the links for SSL configuration for AS ABAP and AS Java:
    http://help.sap.com/saphelp_nw70/helpdata/en/0d/a22640632cec01e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/56/a12640632cec01e10000000a155106/content.htm
    After that, you need to exchange client certificates between your PI and mail server so that the two systems will accept each other's logon tickets. Only after that you can use your mail adapter with SSL. All adapters that run on the adapter engine use Java AS's authentication mechanisms, so SSL should be enabled for your AS Java, you cannot enable it only for the mail adapter.
    I recommend trying this scenario with another mail server that doesn't require SSL first with plain authentication. Then you can go for SSL, but you will probably need an experienced basis guy to help you for the configuration.
    Hope this helps,
    Regards / selamlar
    Gökhan

  • Does Cisco ASA support android ?

    Dear all,
    Does Cisco ASA 5505 support android ? for smartnet phone and other systerm use anddroid.?
    Best Regards,
    Rechard

    Rechard,
    Just adding my two cents:
    ASA and Native L2TP-IPSec Android Client Configuration Example
    Android and L2TP/IPsec Clients
    AnyConnect Mobile License
    HTH.
    Message was edited by: Javier Portuguez

  • Libsapcrypto - does it support 4096 - bit RSA keys

    I have a few questions about the libsapcrypto library and it's use with SSL server certificates.  Will it support
    4096 bit RSA keys?    Will transaction STRUST support openssl server certificates 4096 bit or otherwise with
    the libsapcrypto installed?
    Thanks.

    Yes - see [SAP note 690999|https://service.sap.com/sap/support/notes/690999], point 4 as well as [SAP note 836367|https://service.sap.com/sap/support/notes/836367].

  • Does HCP support OAuth 1.0 authentication with a server

    Hi,
    I want to call a service (destination) which supports OAuth 1.0 authentication only at present. is this supported in HCP?
    Thanks,
    Vipin

    Hello,
    You will need to install Adobe Digital Editions which will solve this issue. .acsm files only open with Digital Editions. Also, if you import all of your previously purchased books with Digital Editions, they will be migrated automatically. Digital Editions can be downloaded for free from:
    http://www.adobe.com/products/digitaleditions/
    Best,
    Nick

  • Flash Player 11.1 for Android 4.0 (11.1.115.81) does not support Android 4.3?

    Tried to install Flash Player 11.1 for Android 4.0 (11.1.115.81) on a device with Android 4.3, but failed to execute... Please help.

    There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player (since June 2012). Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both available in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.
    Note: You'll see loads of articles on "sideloading" Flash Player for Android. NEITHER Adobe nor Android support this method of installing and you're on your own if you go that route. The alternate browsers are your best bet.

  • FlashAir class 6 card app does't support Android 4.4 KitKat

    My Android device has gotten ver 4.4 and I no longer can install FlashAir App from Google Play Store. This needs to be resolved ASAP. I no longer can connect to FlashAir SD card from my android device.

    I also have the FlashAir II Wireless Class 10, it is now Feb 2014 and seems after 4 months there is still no answer.

  • IChat - Host does not support Kerberos authentication

    Hi all,
    I have been trying but with no success to set up an iChat server on 10.6. Our OS X server is bound to AD and will hopefully be using AD to authenticate the iChat clients. I have followed Apple's guide on commenting out the <!-- <cram-md5/> --> section of the c2s.xml file which hasn't solved our problems. Open Directory isn't running as a master it is connected to another directory (our AD directory), and as a test I set up a Wiki server on the same box and this does allow us to authenticate against AD.
    The error message we are receiving in iChat is "The host example.com does not support Kerberos authentication. The client is set to use Kerberos, the username format is [email protected] all I think the correct settings.
    Under iChat General Settings on the server the Host Domain is example.com, SSL Certificate: No Certificate, Authentication: Any Method, and Enable XMPP server-to-server federation is enable for all domains.
    This is our jabber fullstatus:
    jabber:state = "RUNNING"
    jabber:readWriteSettingsVersion = 1
    jabber:logPaths:PROXY_LOG = "/private/var/jabberd/log/proxy65.log"
    jabber:logPaths:MUCSTDLOG = "/var/jabberd/log/mu-conference.log"
    jabber:logPaths:JABBER_LOG = "/var/log/system.log"
    jabber:proxyState = "RUNNING"
    jabber:currentConnections = "0"
    jabber:currentConnectionsPort1 = "0"
    jabber:currentConnectionsPort2 = "0"
    jabber:pluginVersion = "10.6.100"
    jabber:serviceMode = "CHATSERVER"
    jabber:domainName = "example.com"
    jabber:mucState = "RUNNING"
    jabber:servicePortsAreRestricted = "NO"
    jabber:servicePortsRestrictionInfo = emptyarray
    jabber:hosts:arrayindex:0 = "example.com"
    jabber:setStateVersion = 1
    jabber:startedTime = "2010-10-07 16:12:01 +0100"
    jabber:jabberdState = "RUNNING"
    This is our changeip -checkhostname:
    Primary address = 192.168.1.20
    Current HostName = ichat.example.com
    DNS HostName = ichat.example.com
    The names match. There is nothing to change.
    dirserv:success = "success"
    Any help with this would be much appreciated, and I can supply further logs details if needed. I have used example.com to protect our domain name but i kept the format identical.
    Cheers,
    Chris

    From the console:
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) The USER environmental variable changed out from under us!
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) In a future build of the OS, this error will be fatal.
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) The USER environmental variable changed out from under us!
    08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) In a future build of the OS, this error will be fatal.
    08/10/2010 13:00:52 iChatAgent[2875] [Warning] JConnection: Error: Error Domain=XMPPErrorDomain Code=122 UserInfo=0x10020b680 "The host corepublishing.co.uk does not support Kerberos authentication."
    The iChat server log shows this at the same time:
    Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] connect
    Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] disconnect jid=unbound, packets: 0

  • Fatal error: Client does not support authentication protocol requested by server; consider upgrading MySQL client

    Fatal error: Client does not support authentication protocol
    requested by server; consider upgrading MySQL client in
    /homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
    on line 9
    This is the error that comes up on the server where the site
    sits. The database is working on my local machine with the local
    settings, but wont connect due to the above.
    I think im using MySQL client 3.23 How do i upgrade?
    I found this on MySQL site:
    http://dev.mysql.com/doc/refman/5.0/en/old-client.html
    I'm not sure how to edit the connection string to make it
    accept the vaules.

    The_FedEx_Guy wrote:
    > Fatal error: Client does not support authentication
    protocol requested by
    > server; consider upgrading MySQL client in
    >
    /homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
    on
    > line 9
    > I think im using MySQL client 3.23 How do i upgrade?
    The MySQL client that the error refers to isn't the version
    of MySQL,
    but the MySQL library bundled with PHP. It sounds as though
    your hosting
    company has upgraded to MySQL 4.1 or higher, but is still
    using PHP 4.
    > I'm not sure how to edit the connection string to make
    it accept the vaules.
    You can't. It's the way that the user account passwords are
    stored in
    MySQL. You need to get the hosting company to upgrade to PHP
    5 or to
    reset the passwords in MySQL using the OLD_PASSWORD()
    function. This
    needs to be done by someone with top-level administrative
    privileges on
    the database.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Does apple iphone 4s support android

    does iphone 4s support android

    If by "support" you mean can it run android, the answer is no. It only runs iOS. iOS is a great operating system though with tons of great features. http://www.apple.com/iphone/ios/

  • IGNORE this since I can not DELETE IT - Your browser does not support cookies, which are required for this web server to work in session authentication mode

    Error - No cookies
    Your browser does not support cookies, which are required for this web server to work in session authentication mode
    This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
    when disabled it works JUST FINE

    Error - No cookies
    Your browser does not support cookies, which are required for this web server to work in session authentication mode
    This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
    when disabled it works JUST FINE

  • Does ASA 5520 support PKCS#11 ?

    Hey.
    does ASA 5520 VPN Plus (Cisco Adaptive Security Appliance Software Version 8.4(3) Device Manager Version 6.4(7))
    support PKCS#11 ?
    Thank you for answering;)

    You can purchase an AIP-SSM module for an ASA 5510 or 5520 to enable IDS/IPS functionality on the platform. 
    http://www.cisco.com/en/US/customer/prod/collateral/vpndevc/ps6032/ps6094/ps6120/ps6825/product_data_sheet0900aecd80404916_ps6120_Products_Data_Sheet.html

  • Android does not support 3D PDF?

    How disappointing, we just purchased an Asus A500 10.1 “Android 2.2
    Tablet and the Adobe Reader does not support 3D PDF.....I know Tetra 4D
    are the developer for 3D PDF SDK and features however under the agreement/partnership Adobe
    was to support the Free Readers.
    It would appear Adobe has really dropped 3D inside
    PDF - thnx Adob's
    Gazzzz

    HI Dave,
    Thanks for the update.  I think your comments may have been valid when mobile devices = mobile phones.
    However the tables are more like a PCs now with quite resonable graphics ablilties - surely we can get
    better functionality for our PDF now.  "You can read text and images, you can search, that is basically it" - PDFwise, this is a step back in functionality - Android has the same functionality as iPAD...In a simlar question to Tetra 4D they (and Adobe) said that are working on a "port" but would not happen til Q3 this year.
    Maybe the way forward is the Asus Slate Table, -an i5, 4 RAM, 64 SDHD, running Windows touch - Android does not seem to yet the functionality I was hoping for.
    In a plus, Tetra 4D seem to pulling the industry in the right direction - fingers crossed

  • Does Flex HttpService support https with client authentication

    Hi,
    We have a set of backend services available over https with client auth (cert based). We need to use mxml HttpService to access these backend services. Does HttpService support ssl with client auth?
    Another question is, for Https does flex share the browser keystore and certstore or uses its own?
    Thanks,
    Debashis

    Yes , a flex HTTPService can access services on https://.  But if I remember correctly , to use an https:// service , the swf has to be served on an https.  Example ,
    Served from https:// ... --> Can access https:// ...
    Served from https:// ... --> Can acess https:// ...
    Served from https:// ... --> CANNOT access https:// ...
    Served from https:// ... --> CANNOT access https:// ...
    Since Flex has the browser do the connecting , the browser handles the keystore stuff , not Flex. I think.

  • Does ASA rdp Plugin supports windows server 2012?

    HI,
    I am using rdp plugin for ssl vpn, it is working fine for windows server 2003 but same plugin is not working for server 2012.
    Can you please tell me does it supports or not. Is there any changes we need to do at server side?

    Hi Guna,
    There is an enhancement request opened for supporting RDP plugins on Windows server 2012.
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuh27112
    So as of now your only options is to use Anyconnect client or Smart tunnel.
    HTH

Maybe you are looking for