Does ATT icon change when not on their home network?

Since the ATT contract only allows a limited amount of off network phone use, does anyone now how to tell if I'm out of their network?
Right now, I'm in Vermont which according to AT&T's coverage maps isn't part of their home network, but my iPhone is showing AT&T with five bars.
Does the icon change to a roaming icon or to an extended network icon if you aren't in an AT&T home network?
- Hardy
http://www.pointatme.com

Bumping this since people now have more time with
iPhones. Has anyone seen the ATT network icon change
to roaming or anything when you are not on ATT's home
network? I think I live on the edge of an ATT and an
extended ATT network provider. I don't want to lose
my contract if I make too many calls on the wrong
side of town, but the icon never changes. If it shows
ATT then can I assume I'm on their home network?
Hardy Macia
http://www.pointatme.com/
Well, as long as you can call, you're either on their network or you're on one that has a roaming agreement. Cingular/AT&T has wide coverage, so I'm not sure where you'd find it. I'll be going to Europe soon (and I am going to get tons of questions from the locals I'm sure)--when I had other phones that always showed T-Mobile, when I got there it would show Orange, T-Mobile, Vodaphone, whatever. It was cool.
That will be the best test.

Similar Messages

Why does my font change when i publish my site on mobileme?

why does my font change when i publish my site on mobileme?
Can anyone help me, i'm using a font that i got from the internet when i look at it in safari its fine but if i log in from another pc/mac the font is changed!!
Please help.
e-mail - [email protected]

If that's the only place you used that unique font, yes. Convert the textbox to an image file by applying a drop shadow to the font and setting the opacity of the drop shadow to 5%.
Click to view full size
OT

How do I add an offline translation to the Bible app to use it when not connected to a network?

How do I add an offline translation to the Bible app to use it when not connected to a network?

You will need to contact the developer of the app and ask if that is possible. If not, you'll need to look for another app that doesn't require a network connection to function.
Regards.

Ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

ive just subscribed to itunes match. do i need internet access to play tunes when not using my home broadband?

On an iOS device yes unless you pre-download the music. On your computer no, unless you decide to delete the tracks from your iTunes library. The latter is not recommended without having a full backup of your muaic files.

My macbook doesnt not find my home network.

My macbook doesnt not find my home network. It finds the surrounding networks but not my home network. My ipod touch and iphone uses the home network and another computer in the house. My home network does not appear in the wifi drop list and when I search via network preferences it doesnt help even though i am using the correct password. Every once in a while it will find the network more thats the exception.

Turn the router and modem off then back on.
I don't have iStubmler downloaded but someone told me that it can do a better job of picking up network signals. So you might try downloading it, but I can't say that I know it will help.

App Store not loading on home network

Hi,
I've had this issue the last few days, i've changed no settings on my home network (Virgin through Belkin N150 router) or on my iPhone 3G. It's that the App Store just stays on 'Loading...' screen without ever loading, but when i take off my Wi-Fi and use 3G the App Store loads no problem at all. Only today i've realised that its not only my phone, its my Dads iPhone 4, Brothers iPhone 3G and Sisters iPod Touch 8gb 3rd gen, its really strange.
Im pretty technologically minded, but with this i just have no idea what to do and how to fix it.
Can anybody help out, any ideas?
Thanks

I've already tried turning on/off iphone and router, deleting network settings, airplane mode, renew lease option, without any luck, by the way.

How do I share my iTunes library with my mother, but not on our home network?

How do I share my Itunes library with my mother, but not on our home network?

Another alternative is she can select tracks from your library copy and just add them to her library. Then she does not have to bother with switching between two libraries.

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

IPhone WiFi will not connect to home network.

iPhone will not connect to home network. WiFi is on and correct password is entered. iPhone error msg says incorrect password. Reloaded network software and did not activate password but iPhone still shows network as locked.

Some people who experience issues connecting to or even seeing there Wireless network should follow these steps.
These steps are just a guideline and its not 100% that it will fix your issue.
Mainly, if the issue persists, its possible there is an issue with your iOS settings or a hardware failure within your iPhone or iPad, specifically the Wifi adapter.
You would want to follow these articles to do a reset & restore prior to saying it is a hardware issue.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414
You will need to access your Admin control panel for your router.
If you have an Airport Extreme BaseStation, you just need to open the Airport Admin Utility found in Applications > Utilities Folder.
Enter your credentials and you will have access to the settings from there.
For a PC: Do NOT use the CD that came with your router. That is used for people who do not know how to setup a router properly and these settings will not be available for you in most cases.
If you are using anything other than an Airport BaseStation:
Open a web browser:
In the address bar, type:
192.168.1.1 (Mainly used for Asus, Linksys, etc) or 192.168.0.1 (D-link,Belkin)
How to figure out what the IP address is to type in?
Windows:
Hold down the windows key, then press R. This brings up the run box. In that box type "cmd" (without the quotes) and press enter. In the black box that pops up, type "ipconfig" (without quotes) then hit enter. Your default gateway is the IP address for your router. It will start with 192.168.....
Take that number and put it into the address bar in your browser and hit enter. It will then ask you for a user name and password. For linksys, it's admin for both. If you have another brand, just google "default password for ******" replacing the asterisks with the brand name of the router. Once you have entered the correct user name and password, you're there.
Mac:
1.From the Apple menu, select System Preferences.
2.In System Preferences, from the View menu, select Network.
3.Select the appropriate port. For example, choose Ethernet for broadbandconnections, AirPort for wireless, or Internal Modem for dial-up.
4.Click Advanced... , and in the sheet that opens, click the TCP/IP tab.
The number next to "Router:" is your default gateway.
Once you get into your admin panel do these setting changes.
1.On the router change the channel for the 2.4mhz band to channel 1, 6, or 11 (recommended), rather than auto.
2.Also set that channel width to 20hz only, rather than 20hz or 40hz (Auto)
3.Make sure Security is set to WPA/WPA2-Personal. Anything else will cause issues. (of course, make sure you know your password for security)
4.Make sure to Apply/Save these settings. Sometimes the wireless connectivity will go out during this change and will come back on within 15-30 seconds.
5.On the iPhone/iPad go to Settings > Wi fi > click the blue arrow beside the network > Select Forget network
6.Go to Settings > general > reset > reset network settings
7.Power the phone off and on. Connect again
For additional assistance in troubleshooting Wifi connection problems go here: http://support.apple.com/kb/TS1398

Can I homeshare my music with somebody not on my home network by providing my applied and password in the setup for homesharing

can I homeshare my music with somebody not on my home network by providing my applied and password in the setup for homesharing

Yes, you can install and use the software on the 2nd machine so long your new company owns the license, the software is used but the same person who is using the primary installation (that is, you).

Why doesn't the icon change when I go to different websites-example yahoo doens't change to the purpe circle with the y inside?

When I pull up mozilla, I have a gray circle in front of the att homepage. When I go to yahoo, this icon doesn't change to the purple circle. The gray circle remains in the address bar before any website . -possibly only unsecured websites since I see that I have a picture of a lock when I was directed to this website. This recently happened and it occurs every time I pull up the browser.

I have been going crazy trying to figure out what was wrong. I was ready to take my computer in. Thanks so much for informing me of this -now I can rest easy . have a great day. Angela

Why does text color change when exporting to PDF?

I have a white background. In a textbox, I have black text and white text. When I export to a PDF, the black text stays black but the white text changes to black. Any idea why that happens?
I have a similar situation with shapes. I have a black circle and a textbox on top of it. There is white text in the textbox. When I export, the white text here also changes to black. So you can't see it in the PDF (becuase of the black circle).

I do not get the problem.
All text stays the correct color. Black is black and white is white in the pdf.
Are you opening this on a Mac in Preview, or are you opening it in Adobe Acrobat?
I have opened my .pdf (it would have helped if you had posted your problem pdf) in Acrobat on a Mac and that also has opened correctly.
I tried both exporting and printing to .pdf both work in Preview and in Acrobat.
Are you doing something else you have not told us about?
Peter

Icons changing when downloading reader, why?

When I download any version of reader, all my desktop icons change to PDF icons. Running Windows 7. What's happening?

I don't know the why, but this should be useful for correcting the problem:
http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acroba t.html

Source system icons changes when connecting SAP BW to mySAP ERP 2004

Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are based on SAP Web AS 6.40 or greater
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract both from the internal BW System and from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.

Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab

Why does planning indicators change when the safety stock change?

Hai All,
I created a BOM for a finished material (FM1)and entered another finished material(FM2) in item list.
Now in MRP, I did single item multi level planning for the FM1. I checked the planning file entry through MD21 and it has NECH and NECPL marked. I checked for FM2. None of the indicators are set. Then I have been to material master for FM2 and in MRP2 screen and changed the safety stock to 950. Then I checked the plannig file again and I see the indicators NECH and NETPL are checked. I then made the safety stock 0 and checked the planning file. There is no change.
My question is why were the indicators NETCH and NETPL checked when I increased my safety stock for material FM2 from 0 to 950?
I understand that NETCH is the planning for Net changes and NETPL is for planning for changes in a horizon.
Are these indicators set because I made a change to the material? or is there any other reason?
Thank you.

Visu
The planning indicators change when there is an amendment to the planning situation that requires MRP to replan a material. Essentially, by upping your safety stock from 0 to 950 you are requesting that the MRP system replans that material to ensure that there is sufficient safety stock available.
Hope this helps
Ian

Does ATT icon change when not on their home network?

Similar Messages

Maybe you are looking for