Does ATV send output through digital output when TV is turned off?
I listen to music more than I watch video, therefore the answer to this will factor into my decision to buy ATV and use to select and play music from an iTunes playlist through my home stereo from an iOS device......thanks!
Welcome to the Apple Community.
There are mixed reports about users experiences here, my assumption is therefore that it depends on which hardware you are using with the Apple TV.
Similar Messages
-
Does the iPhone 5s scan thumb even when setting is turned off?
Call me paranoid but I will not get my thumb scanned anywhere. I don't really trust that they won't sell the information anywhere or at least to the NSA. Does anyone know how the button works, the code? Can anyone confirm that the button does not scan only when you choose that option. That is why I've been hesitant to upgrade from my iPhone 5. I guess I could always someone mod the phone to have a clickable button again. Thanks!
Reading this makes me feel a little better. Still would probably put a piece of tape over the home button just in case. NSA won't have a chance!
Secure Enclave
"Touch ID doesn't store any images of your fingerprint. It stores only a mathematical representation of your fingerprint. It isn't possible for your actual fingerprint image to be reverse-engineered from this mathematical representation. iPhone 5s also includes a new advanced security architecture called the Secure Enclave within the A7 chip, which was developed to protect passcode and fingerprint data. Fingerprint data is encrypted and protected with a key available only to the Secure Enclave. Fingerprint data is used only by the Secure Enclave to verify that your fingerprint matches the enrolled fingerprint data. The Secure Enclave is walled off from the rest of A7 and the rest of iOS. Therefore, your fingerprint data is never accessed by iOS or other apps, never stored on Apple servers, and never backed up to iCloud or anywhere else. Only Touch ID uses it, and it can't be used to match against other fingerprint databases." -
IPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock.
iPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock. Is this a functional discount or something else? [This system has worked with iPod Classic and Nano 4 gen.]
Perform the instructions for your version of Mac OS X on this page.
(15457) -
Apple is great!
Why is iMessage taking my incoming emails and then not making them available for my PC to get? Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).
I compose an iMessage with the destination as my email address and I attach 2 photos I want on my PC. I send them several times from my iPhone 5C but they never arrive. I look at my ipad later and realize that it's iMessage app is getting ( and swallowing) these emails. I then turn the ipad off. Still can't get the photos through because iphone is now getting them on it's iMessage. I turn off the iMessage feature and try to send photos from text msging. Phone tells me it can't send photos unless iMessage it turned on. What happened to regular MMS text messaging? I go and try to send photos as an email attachment and see that there is no option to attach from the stupid email program. I look up online to learn about the brave new world of apple attachments and send them.
Why is iMessage taking my incoming emails and then not making them available for my PC to get?
The email program on my iphone is not configured to remove messages from the server.
If iMessage is turned off I don't have the issue.
Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
Why can I not send a SMS message to a non iPhone when MMS is turned off?
Why can I not send a SMS message to a non iPhone when MMS is turned off? I'm getting charged an MMS every time I send a text to a non iPhone so have turned off MMS. Have tried all sorts of work arounds include rests etc. Anybody any ideas?
Both of those are carrier features, contact your cell phone provider and ask them why.
-
When trying to turn off iPad3 the red slide does not appear
When trying to turn off the ipad3 the red slide bar never appears when holding the home button down
That's because you DON'T hold the home button to power iPad down. You press and hold the power button on the upper right hand corner of the top of your iPad.
-
ITunes 11.0.4 is shuffling music even when shuffle is turned off
Grrrr. This is really driving me nuts.
I'm using 11.0.4 on my MacBook Pro (OSX 10.8.4).
iTunes will shuffle the music I'm playing even when shuffle is turned off. It will finish track 1 of an album (for example) and then go to 9. or 11. or 7.
What the heck is going on??Hi Allen
Many thanks for the links, although i was aware of the sleep proxy and its uses. The problem i'm having does seem to be related to this, although the key difference between what i am (or was) experiencing is the definition of 'occasionally' as mentioned on the page you linked to.
What i was experiencing was the mac mini would go to sleep then 60 second later it would stir, as if being woken to reregister its services with the sleep proxy, then it would go back to sleep. Then around 60 seconds later it would do this again, and so on and so forth until it was fully woken in one way or another.
Now i do seem to have made progress after digging around a little further. I did figure out that it was a bonjour service/ or device that was causing the mac mini to stir And as i mentioned in my previous message this behaviour would cease if itunes was closed or home sharing was turned off. So the only thing on the network that was connected to this was my 2 apple TVs. As a test i unplugged both boxes and put the mini to sleep again. Then i waited and waited and the mini stayed soundly asleep.
I have since plugged the 2 ATVs back in, one at a time, and the mini now seems to be sleeping for around an hour before it wakes, presuming to do the sleep proxy service thingo.
i'm just running another test to prove to myself that it is actually back to a more normal state with both ATVs plugged in, so fingers crossed.
if anyone knows, does this now sound like a normal setup with the way the sleep proxy works?
i suppose i should have done this at the start, but i have 1 airport extreme, and 2 ATVs (and few ipads, iphones and the like all onthe network), if that helps.
Leigh -
My ipod stills pauses when the display turns off, even though, my headphones are correctly attached (or flushed)
Does this happen still when you use another set of headphones? Have you check to make sure the headphone jack is clean and clear of debris? If so, the jack may be faulty or damaged meaning you'll need to take or send your iPod in for service/repair.
B-rock -
TS4185 do facetime calls go through on a mac that is turned off?
do facetime calls go through on a mac that is turned off?
Crystal,
When my iMac, running Snow leopard is in sleep mode, it does not respond to Facetime calls. Although, I did read a thread a couple months ago where two different people ran a test on their macbooks -- would you believe that one said that their Macbook did ring when asleep, the other said it did not. Everyone I know who is using Facetime for Mac says that they never got any calls when their computers were in sleep mode. -
Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.
Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling -
i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work. help plzzz
Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling -
Img alt="text" not displayed when images are turned off in Safari
I have tried to search this, but every search has returned too many posts, so I apologize in advance.
Have I made some error or is there an issue with my Safari? For some reason my Safari does not display alt="text" when images are turned off?
This is what is supposed to happen (see http://www.w3schools.com/tags/attimgalt.asp) and it works fine in my other browsers (Opera, FF), but with Safari I get nothing - no image, no alt text, no indiciation that an image is supposed to be in that place. According to w3c, Safari is supposed to be compliant.
There is no problem with the site itself, I am designing the site and test with and without images to see how it degrades. As I said, it works properly in Opera and FF - the alt="text" text is displayed in place of the image - but not in Safari.
Is this just my Safari? How do I fix this if it is?
Is it Safari in general? If so, how do we get it fixed, because this is clearly just not correct?It's not just you. I see the same thing in my Safari. It appears to be a Safari problem, in which case the best thing to do is submit feedback to Apple's developers via the Mac OS X feedback form. (You will not receive a response, as that page notes, but the feedback will get to the people who can use it.)
-
my Ipod doesn't recognize when i have turned OFF the hold...it still reads as hold..any ideas?
thanksA Reset (in link from previous post) is not a Restore. It does not erase the iPod. A Reset is THE method to "re-boot the whole system."
The reason for the Hold switch has nothing to do with turning an iPod ON or OFF. It exists because most iPods have touch-based controls. The Hold switch is there to lock the controls, in situations when the iPod is playing music and you don't want to inadvertently touch the controls while handling the iPod.
Pressing and holding the Play/Pause button turns an iPod OFF. But I hardly ever manually turn OFF my iPod (except for my iPod shuffle). I just stop playing music and leave it alone. The display backlight goes off by itself within a few seconds, and if the controls are not touched, the iPod soon goes into the same power saving mode as turning it OFF manually. -
CRM 2011: when auditing is turned off, why do existing Audit records lose "New Value"?
Not sure if this is by design (if so, would love to know why!) or if this is a bug. Let's say I have auditing turned on for Accounts. I change the phone number in the Main Phone field from 555-1111 to 555-5555, and an audit record is
created showing the Old Value (555-1111) and New Value (555-5555). Great. Now I turn off auditing. The system goes back to the audit record that had previously been created, and modifies it so that it shows the Old Value (555-1111),
and inserts an icon into the New Value field indicating auditing was turned off. The tool tip for that icon states "Auditing was stopped and restarted. The new values for the fields that changed during this period cannot be identified or recorded."
First of all (minor picky issue) auditing hasn't been turned back on yet, despite what the tool tip says (says the same thing whether or not auditing is turned back on). But the real problem is
why the existing audit record's New Value would be removed... why would that happen?!? We're talking about a historical update. It really did change, and the system knew what it changed from/to, so why would the system remove that new value
from the audit record? Logically I would expect that any changes made
while auditing is off would not be logged, and that once auditing is turned back on, Old/New values would correspond to whatever was/is in the system at the time that any new audit record is created, so there may be a disconnect between an older audit
record and a new one (old record's New Value not matching the new record's Old Value, because changes were made while auditing was off). And it's quite apparent when auditing is turned off, because an audit record is created stating "Auditing Disabled".
Any ideas if there's a logical reason why it would do this, or if this is really a bug that Microsoft needs to fix? We have a client with a business need to periodically turn off auditing while integration updates run between CRM and another system
(otherwise hundreds of thousands of unnecessary audit records would be created). But if they're going to lose audit data every time they disable auditing, the auditing is worthless.We wouldn't ever temporarily turn auditing off on purpose... it's happening when we import managed solutions. We have vendors with managed solutions that contain system entities such as Contacts. When importing their solution, it momentarily
turns auditing off on those entities. The only evidence of this is audit records indicating "Entity Audit Stopped", and of course the loss of all the most recent "new value" on all audit records. The interesting (?) parts of this are:
1. When importing the managed solution, the recommended option to keep all existing customizations is selected. I would think this would include the audit settings on the entity, but apparently not (sort of... see #2).
2. As soon as the managed solution is imported, in addition to creating an "Entity Audit Stopped" audit record on relevant entities and wiping out new values, it apparently turns auditing back on, yet there's no record of this (in customizations, the entity
still (or once again) indicates auditing is enabled; but on records for that entity, there is no "Entity Audit Enabled" record.
So, now it's on to working with the vendors, to dig into their managed solutions and see if there's a way to prevent this! -
When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???
Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik
Maybe you are looking for
-
is it possible to connect xbox360 to apple tv with ethernet cable to access internet?, is it possible to connect xbox26 to apple tv with ethernet cable to access internet?
-
How do I contact Apple about these emails I'm getting from them?
Hi everyone, I'm getting emails from Apple about renewing AppleCare and a replacement iPhone 4 but it seems they are meant for someone of the same name as myself who lives in the US. The odd thing is they are sent from Apple to an email address ident
-
I have an iPad mini that will not respond and is non functional. It continues to intermittently try to automatically restart, access home page without success. It will not accept normal charge. I have tried to manually restart, reset and have been
-
Displaying tables in Oracle SQL Developer
Anyone who can help me I thank you in advance. I installed SQL Developer v1.5.3 and can connect to the databases I want to access. After establishing the db connection the Tables icon is displayed. I click on it and no tables are displayed. I can run
-
How can i LPAD and/or RPAD this query in sql
Hi, I have a column in a table with value 'True Wheel '. I want the result in the following format: 'True*Wheel*****' i.e I want to pad '*' on the right as well as at the centre of the two words. Is it possible ? Please help !