Does auto provisioning work with position based security

We are implementing GRC 5.3 and use position based security.  I am able to run risk analysis for position based security but now we want to use CUP and push our roles to the positions.  And finally we want to associate the user to the position.  We want to do all of this through GRC.  Is this possible?
Thanks!

Peggy,
   For this to work, click on the tab (on top) which says by system. Here you can set up autoprovisioning by system. If you have 5.2, I don't know if this is available or not but it is available in 5.3.
Regards,
Alpesh

Similar Messages

  • Does AirPrint work with all kinds of printers with modern usb capability? Does it also work with android based devices?

    Just as the question says

    Does AirPrint work with all kinds of printers with moden usb capability.
    AirPrint works if you have an AirPrint compatible printer.  See this Apple support document for details on compatible models.
    http://support.apple.com/kb/HT4356
    If the printer is not AirPrint compatible, it still might be possible to enable printing by installing an App like Print Central on the iPad, iPhone, or iPod.
    PrintCentral Pro for iPhone/iPod Touch - iTunes - Apple
    Does it also work with android based devices?
    I would be surprised if it did, but best to ask that question on an Android support forum.

  • Does icmp redirect work with policy based route

    Setup:
    R1 and R2 on same ip net.
    On R1 policy based route is configured with R2 as next hop.
    Will R1 send icmp redirect (to use R2 instead) to those hosts that match the policy based routing ?
    Thanks.
    Gert Schaarup

    HI Gert,
    The answer to your question is yes. I have verified this in a lab previously. As long as all the conditions for ICMP redirect have been met (source address on same net, best gateway on same net) then ICMP redirects are sent regardless of whether PBR or normal routing is being used.
    Hope that helps - pls rate the post if it does.
    Paresh

  • IDM, GRC and position based security

    We use position based security in our ERP  system and are implementing GRC.  In our BI system the roles are directly assigned to the User ID, but we need them to dynamically update if a position change occurs.  We have this functionality working in QAS by implementing CUA, but we are considering if IDM can be used instead.  There seems to much less documentation on how to configure IDM with position based security (compared to CUA), so I have a few questions.
    Assuming IDM is receiving its provisioning requests from GRC, can it be configured to provision a role to the position on one system and a user on another?     
    How can IdM be configured to react to a position change and update the roles appropriately?
    Has anyone implemented GRC and IDM with position based security?
    Regards,
    Wayne

    Hi Wayne,
    In IdM, you can define business roles (for your positions) and map these to the technical roles that you can distribute to your SAP systems.
    You can configure IdM to react to changes in your HCM system and automatically create and distribute roles based upon e.g. the new job description of a user.
    I've attended Teched, and the SAP recommendation is to use IdM to manage your users and do the provisioning and to use GRC for compliance checking.
    So in HCM the position of a user changes (e.g. promotion), IdM picks this up and proposes a set of roles for the user, IdM sends this to GRC via web service, GRC checks for compliance (SOD) issues and if there are none, GRC tells IdM all is OK, then IdM starts the provisioning. If GRC reports issues, you should have a workflow in place to handle these.
    This is all theory though, I'm just getting started with IdM myself.
    Kind regards,
    Dagwin

  • Is there any difference in upgrade for position based security model

    Hello Gurus,
    I am working on a Upgrade project from 4.6c to ECC6.0 , In 4.6C R/3 system position based security concept is used.
    Are there any extra precautions need to be taken while upgrading in a position based security model ?
    Or
    Is it the same procedure either it is a role based security model or a postion based security model.
    iam new to this upgrade stuff, please kindly direct me in the right direction.
    Also please provide if any documents are available.
    Thanks,
    Sanketh.

    Hi,
    Already there are many document posted on SDN on same . Security upgrade is standard and mostly deal with role modification and can you elaborate more on Position based. Positiong related assignment also taken care with respective functional team  for ex :HR and technical team Workflow if there are any issues.
    Better you go throug the upgrade document .see post already available in forum before starting with upgrade.
    Experts correct me in case of correction.

  • Does time machine work with the trash folder?

    Does time machine work with the trash folder? So if I have the entire aperture library backed up to the time machine. Is it safe to empty the trash folder in aperture? I am able to recover files from time machine later?

    So make a top-level Project called "_Circular File".  Put Images in there that you what to have out of your way but not discarded.
    It really is good and proper to treat the Trash as trash.  I instruct everyone to _empty_ the Aperture Trash at the end of _every_ session.  The reason is this: it is the only time you will remember whether it is safe to delete the items in there.  If you wait, you will then waste time trying to answer "Did I really mean to throw that out?" or, periodically, you'll give up trying to remember, and will empty the Trash without reviewing it.  At the end of every session, examine the Trash, confirm that the items there are trash, and empty it.
    Shocking, perhaps, but you should also empty your system trash every day.  The real-life equivalents are good guides here.  No-one in an office hoards their trash.  If you mean to throw something out, throw it out.  If you don't mean to throw it out, do not put it in the trash.
    I don't know how TM handles the Aperture Trash.  I do know, however, that I would not expect this behavior to remain consistent, and would absolutely recommend against a workflow based on it.

  • Does the curricula work with or without the SAP software?

    Hi! As a faculty member... does the curricula work with or without the SAP software? Is it better to lecture with the software or can I get by without it?
    If I'm part of a member university how many students can I provide access to the software? Are there any limitations?
    Also, I'm based in Philadelphia with connections to the 2nd largest university... Can I pick my UCC or will it be assigned to me? I'm open to either one!
    Many thanks!
    Richard

    Hi Everyone,
    One key intent of this community is to present curriculum resources for lectures of either type - with access to SAP software for the professor and students in classroom and lab environements OR without access to the software.
    The former, with SAP software access, requires formal membership in our long-standing University Alliances program (UAP). With this membership, professors receive special access to curriculum elements designed to be dependent on use of SAP software (an of course access to everything in our community).
    The latter, without SAP software access, requires simply registration in this new University Alliances community (UAC). This community makes many resources available to professors to integrate into their business and IT-related lectures and projects - including pre-recorded demos, videos, expert and analyst reports, articles, white papers, customer reviews, references, and case studies, etc.
    The curren state of the site is like a start-up. There is a lot on offer, but we also expect that there is a lot more out there to grow. We know there are many elements which we can make available to the worldwide community once they are contributed. We are actively approaching professors in our networks now for items.
    We would be grateful for anyone that we have not contacted to come forward and offer content of their own, for the UAP members or for the greater UAC.
    Thanks and Best Wishes
    Bob LoBue

  • Does Front Row work with PowerPC G4?

    Does Front Row work with PowerPC G4? Where can I get it?

    There are ways, but it has limited ablities since you don't have the IR based remote needed. There is a "hack" of sorts which tricks front row to install on other Macs. I have it on my Power Mac G4 and my ibook as well. Just do a google search.
    There is nothing illegal about the hack since you download the free update from the apple website. All the hack does it make the installer think you have a iMac or Macbook Pro.

  • Does the SMPTETTPlugin work with Strobe?

    Does the SMPTETTPlugin work with Strobe, or just OSMF?
    http://blogs.adobe.com/accessibility/2011/10/new-work-on-closed-captioning.html

    **Update**
    I gave MAC filtering a try. It worked great without the range extender. However, for the range extender to work, it's MAC address must be setup in the router for access. When I tried to connect to the network on a computer without a registered MAC, and with the range expander on, it let me pass right through.
    So, I'm assuming since i was connecting to the router through the range expander, which had a registered MAC, I was able to get access. So wireless MAC filtering was a no go since anybody wanting to connect could do so via the range extender.
    For me...WEP/WPA encyption doesn't work. Wireless MAC filtering doesn't work.  But what DOES work, is not broadcasting the SSID while not having any wireless security encryption in place. Nobody can wirelessly connect to your network without knowing the SSID, which in a way is more or less like a password. Just remember to change the SSID on both the router and the extender to something that you, or anybody else in the area, has not used in the past.
    I hope all this info is helpful to somebody.

  • Does creative cloud work with windows 8

    does creative clould work with windows 8?. I see windows 7 as a minimum requirement with no mention of windows 8

    lewis0,
    Welcome to Adobe Community .
    Minimum requirements means that you have to have these as the minimum configuration to install the Adobe Products . You can surely go ahead and install the product on a windows 8 PC and it should work fine.
    Regards,
    Kartikay Sharma

  • To what extent does auto-syncing work...?

    I have researched this but can not find the answer anywhere.
    I need to know to what extent does auto-syncing work?
    I started my library quite some time ago, and I didn't want to use the auto-sync feature. My library has grown very large and to be honest, I still wouldn't mind doing the manual syncing if my behavior and/or needs hadn't changed. However, I am now going back and adding artwork and making some slight modifications to several songs. Overall, through one type of change or another, this will affect the vast majority of my library. What I need to know is if I were to make info-related changes, will the syncing make the modifications on the ipod, or will they be ignored?
    For instance, here are some of the types of changes that I am beginning to make:
    - Adding Artwork.
    - Changing a track name from "Living in a box" to "Livin' in a box"
    - Adding info to the various fields such as album author, comments.
    - Modifying a track name from "Love is a Battlefield" to "Love Is A Battlefield"
    - Changing an album name from "Miami Vice Soundtrack" to "Miami Vice [Soundtrack]" or "Shrek (Soundtrack)" to "Shrek [Soundtrack]"
    - Updating an artist's name from "Jackson Five" to "Jackson 5"
    Any insights would be most appreciative.
    Bill

    While in Manual sync, any changes you make in iTunes will not get put onto the iPod until you drag the songs over.
    Any changes you make on the iPod thru iTunes will not be on the original in iTunes.
    Any rating,
    Any reason you are using manual sync instead of Auto sync?
    If you don't want (or can't) to put everything in iTunes on the iPod, use selected playlists and manage those playlists.
    When you make changes to the songs in iTunes, they will get updated onto the iPod automatically.

  • What is the mean of using Portal with Role Based security as entry point

    Hi Experts we have requirement of integration of Portal and MDM
    I am completely new to the MDM. So please give me some idea , what is the meanin for following points.
    1) Using the Portal with Role Based security as entry point for capacity and Routing Maintaince(These two are some modules).
    2) Additionally , Portal should have capability to enter in to the MDM for future master data maintence. Feeds of data will need to be come from  SAP 4.6c
    Please give me the clarity of what is the meanin of second point
    Regards
    Vijay

    Hi
    It requires the entire land scape like EP server and MDM server both should be configured in SLD.
    Your requirement is maintaing and updating the MDM data with Enterprise portal.We have some Business Packages to install in Portal inorder to access the functionality of MDM.
    Portal gives you a secure role based functionality of MDM through Single sign on (login into the portal access any application) to their end users.
    Please go through this link
    http://help.sap.com/saphelp_mdmgds55/helpdata/EN/45/c8cd92dc7f4ebbe10000000a11466f/frameset.htm
    You need to develope some custom applications which should be integrated into the portal to access MDM Server master data
    The estimation involves as per your requirement clearly
    Its depends upon the Landscape settings, Requirement complexity,Identify how many number of custom applications need to be developed
    Regards
    Kalyan

  • Does apple tv work with hdmi to VGA hd15 cable?

    I have a Phillips tv and there is no hdmi to hdmi connection. But there is a VGA 15 input. Does apple tv work with it? I seem to be getting a black screen.

    I tried hard. Four different manufacturers, including Belkin, none of HDMI to VGA works with rMBP. However, all of them work with other sources, like Dell notebook.
    HDMI directly from rMBP to HDMI intput works fine.

  • Does apple tv work with ee router

    does apple tv work with my ee smartbox router

    Doubtful.
    What allows for streaming content from an iPad to a television thru an Apple TV is Apple software included with iOS on the iPad and the Apple TV software. Unless there is a 3rd party android app that provides for this, no.

  • Does Apple TV work with ipads?

    Does Apple TV work with ipads?

    http://www.apple.com/airplay/
    http://support.apple.com/kb/HT5209
     Cheers, Tom

Maybe you are looking for

  • Discoverer 4i:i have to create a report based on the two columns

    Hi, I have to create a report(workbook) that will have 2 parameters from date & to date.i have to apply a validation that from date should be lesser then to date.Do reply Thanks,

  • New iMac Mini Display Port

    I can NOT believe it...the input dimensions for the mini display port are smaller on the new iMac than the previous iMac! So now I can't go dual screens until I buy another connector! That *****...why wouldn't accessories remain the same....just stup

  • Namespaces in plan.xml - can't override weblogic.xml

    So, we've tried every combination we can think of, but we can't seem to get a plan.xml that successfully overrides items in weblogic.xml. It seems to be an issue around namespaces: <May 19, 2009 10:40:57 AM MDT> <Error> <J2EE> <BEA-160197> <Unable to

  • Mail to group reveals individual addresses

    Hi, I used to be able to send mail to a group, only the group name showing in the To: field. Now, when I try the same, as soon as I select the group in Address Book to go into the To: field in Apple Mail, it shows all the addresses in the group. When

  • Can't open file I saved previously--help please

    Hello all, I completed a very long editing session, saved the file(in multiple locations for backup purposes). When i tried to open it today, i get the following error. [/Buffy/pro/3.0/MediaCore/ASL/Foundation/Make/Mac/../../Src/Mac/MacFile.cpp-943]