Does Azure support origin pull?

Is it possible that Azure pulling the Media content from my website and cache it.
Its called Web Distribution aka Custom Origin or Pull Origin at Amazon AWS
Does Azure has same feature so that I can use CDN for my website?
One may ask, Amazon is Perfect why you want to move to Azure?
I always liked Microsoft Product and there new "Cloud First" protective has bought me here..
BTW I tried trail account but cant find a way to assign Pull Zone to my domain.

Hi Anirudh,
I found some information related to your querey here :
http://feedback.azure.com/forums/169397-cdn/suggestions/3046714-custom-origin-support-to-cdn
Hope this helps.
Regards,
Shirisha Paderu.

Similar Messages

Does Azure supports switching between databases?

We have 1000s of Stored Procedures, Views & Functions with 'SELECT * FROM DB1.dbo.TBL1' we constantly switch between databases (about 300 of them) within a single instance, running real-time on-line business. These are back-end SQL queries that
we normally run from one of the ADMIN databases with in the same instance.
I tried using 'USE <database name>' and realized that it does not support and then tried using <db name>.dbo.<tbl name> that also does not work.
If these 2 functions does not support within Azure we simply cannot use the environment to support our business databases, could someone please confirm this - thanks.

Hello,
Yes. Cross database references or four-part names are not supported by SQL Azure.
Windows Azure SQL Database supports the three-part name database_name.[schema_name].object_name when:
• the database_name is the current database
• the database_name is tempdb and the object_name starts with #.
Reference:Syntax Conventions (Azure SQL Database)
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Does Azure Media services support storing images?

Hi,
We are planning to store the media files in azure cloud, initially we planned to use the Azure blob storage and after deeply investigating we found the Azure media services has some outstanding capabilities like streaming offline viewing etc. compared
to azure blob storage.
So here my question, does this supports storing the images as well?Please confirm this ASAP.
I read the some article about media services, there it has been given like below, but Just i want to confirmation about this.
Supported file types in Azure Media Services
Various video, audio, and image file types can be uploaded to a Media Services account, with there being no restriction on the types or formats of files that you can upload using the Media Services SDK. However, the Azure Management portal restricts uploads
to the formats that are supported by the Azure Media Encoder. These import formats include MPEG-1, MPEG-2, MPEG-4, and Windows Media Video encoded video, MP3, WAVE, and Windows Media Audio encoded audio, and BMP, JPEG, and PNG encoded images. The Azure Media
Encoder can export data as Windows Media Video, Windows Media Audio, MP4, and Smooth Streaming File Format.
For more information about the supported file formats see "Supported input formats" and "Introduction to encoding."
Thanks,
Kiran

Hi John,
One more Question here.
As of now we are planning to store and retrieve only the images and audio files with media services, so can I avoid encoding and packaging and use it?Will it work?
Can I access the images and audio files without encoding and packaging?
In future, we are are planning to add the videos as well.
I think encoding and packaging will come into picture when streaming the videos.
Thanks,
Kiran

Does SQL Azure support XML index?

Hi
I read the doc link below that Azure supports selective XML index? Is that true? I couldn't find any other documentation. I know it previously didn't support full XML index or has this changed?
http://msdn.microsoft.com/en-us/library/azure/dn387405.aspx
Does anyone know? Thanks,

Hi Jilim,
As Olaf said, the feature is not supported in current version of Azure SQL Database.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

"...does not support this type of alias."

I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
Lloyd

Barry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Why does Silverlight install process state that my 64-bit Win Vista OS does NOT support the 64-bit version of Silverlight?

As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.

Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using.

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

Ever since enabling Soft Delete on one of my tables, the logs are flooded with "... does not support the 'deleted' system property"

I enabled Soft Delete on one of my Azure Mobile Services tables, and ever since then, the logs are flooded with tons of warnings that say something like this:
The table 'Section' does not support the 'deleted' system property.
Is there a way to suppress these warnings, or is it advisable to enable soft delete for all of my tables?
As a follow on, is there a way to export the logs so that it's easier to peruse through them and search?
Thanks :)

Hi
You can set your logging level in Azure Admin portal to be Error only, so it only logs errors and warnings will be ignored.
Regards
Aram

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall I do.Thank you

Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall I do.Thank you

It can only be serviced in the country where it was originally sold. Take it back to the US or send it to someone you know there to take it in for service.

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1

Hai friends,
I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
"The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
What does it mean? Kindly help.
Regards,
Neha Solanki

Hi,
It's not Absolute version. It's obsolete version(means No more)
This will help you:----
The extraction program does not support object 0JOB_ATTR
Regards,
Suman

IDVD version 7.0.3 (1110) does not support .mov files???

After the last software update (01.26.09) I can't open my projects made with iDVD 7.0.2 just some days before the update. While opening an old project I receive system message about lost video files. When I try to drag this files manually, I receive message: Unsupported File Type: Broken Reference Movie in: 'name of my .mov file. Meanwhile, the files are on the same place as before.
Is somebody here who have met this problem? What to do? How to come back to previous iDVD version?

Yes iDvd does still supports .mov
However, it's a QT Reference movie you are dealing with and anytime you move this file from it's original location you'll confuse iDvd. The solution is to re-establish the link so that it's no longer a broken link.
iDvd should give the option via a dialog box to find that particular asset before it proceeds any futher. Is it not offering you this option?

Lightroom 3 does NOT support raw files for the Canon Sureshot S95

Have just bought the new Canon Sureshot S95
after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
Canon Sureshot S95.
Come on Adobe.....please provide an update asap.

(1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW. Hardly a satisfactory solution.
(I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ).
(2) SUGGESTION- even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting). I am sure users with that preference would still prefer a JPEG than no picture at all!
Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs. So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
JJ
* (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

Does Azure support origin pull?

Similar Messages

Maybe you are looking for